View Full Version : 1jz spark plugs
terror
10-26-2008, 03:50 AM
changing my plugs tomorrow and i was wondering what type of plugs you 1jz guys are running. thinking about gettin ngk coppers but still thinking. part numbers would be helpful thanks.
terror
10-26-2008, 12:56 PM
also goining to do a compression test but ive been searching for what are the compression specs but have come out dry.:1zhelp:
aphxero
10-26-2008, 01:07 PM
ngk 6097 forever!
pnutcar
10-26-2008, 01:41 PM
ngk 6097 forever!
+won
.028 for stock. I run mine .025.
also goining to do a compression test but ive been searching for what are the compression specs but have come out dry.:1zhelp:
Mine is b/t 155-165psi across the board. From what Ive seen, mine is on the lower end of things, but still good within each other. There are more comp threads on SF, might wanna check there.
OneJSupra
10-26-2008, 02:56 PM
ngk 6097 forever!
enuf said.... \end thread
chuckmuska2005
10-26-2008, 03:16 PM
Ngk 6097.
terror
10-26-2008, 07:39 PM
hmm why such a small gap?
albert74
10-26-2008, 08:48 PM
hmm why such a small gap?
The smaller the gap on the plug means less chance of blowout if you're running higher than stock boost.
terror
10-26-2008, 08:51 PM
damn it
JASONA70
10-27-2008, 01:06 AM
just bought a big ass box of ngk 6097 and going to gap them at .25 ftw
91 mK3
10-27-2008, 01:30 AM
ngk 6097 for as long as i run a jz engine
lilazni3uoy
10-28-2008, 07:11 PM
6097 gapped at .022 here @ 510 rwhp lol!
pnutcar
10-28-2008, 07:48 PM
6097 gapped at .022 here @ 510 rwhp lol!
Interesting. What is your setup and when did you notice blowout? I might take mine down to .024 just to try it.
lilazni3uoy
10-28-2008, 08:14 PM
gt35r aem, hks dli, mk4 550cc injectors, single walbro pump, gapped at .022 for 91 pump and race gas setups
jza71
10-28-2008, 10:53 PM
701 whp with ngk 3330 gap at .022.
ngk 6097 gap at .022 started missing above 30psi for me.
Powered by vBulletin™ Version 4.0.2 Copyright © 2010 vBulletin Solutions, Inc. All rights reserved.