2JZ Adding boost on stock 2JZMap sensors question

[Datsrboi]

I searched but only found results to people running AEM and high end stuff. I see a lot of supra owners boosted past 18-19psi with only a SAFC. I thought that the stock 2JZ map sensor will only go up to 18-19psi? How are you guys doing it?

[DETONATION666]

vpc?

[Nick 95 6sp]

Are you asking/concerned about fuel control or boost control?

You really don't even need an SAFC. The stock ECU will give a generally rich a/f once you do the standard BPU mods and since that's "safe" you really don't need anything else; unless you want to lean it out a little up top for a few extra hp...I never thought it was worth the effot or money to do that. Once you eliminate boost/fuel cut, i.e. BCC, the stock ECU will take care of the rest. I think what you said about the stock MAP sensor is correct, but it doesn't come into play when controlling fuel at high boost/WOT. With a locked closed wastegate and racegas, mine went over 25psi a few times and it was still slightly rich; anything over 17psi I always ran racegas but in that 17 to 22 psi range it was always the typical rich a/f BPU condition.