cel(can't pull codes)?

[mustangnick88]

My 1jz supra started having problems today and the cel came on. Problem is it won;t let me pull the codes. When I jump te1 and e1 nothing happens, just a solid cel. Any ideas of what to start checking?

[tlo86]

did it work before? id take a quick look over wiring

[supramk3man]

Had same problem turned out that the little metal clip that you must have contact wiht in the e1 spot had gotten pushed so far down that the wire wasn't making contact so i used a small nail to touch it. take a flash light and look down both holes and make sure the little metal clip hasn't gotten pushed to far down.

[mustangnick88]

Had same problem turned out that the little metal clip that you must have contact wiht in the e1 spot had gotten pushed so far down that the wire wasn't making contact so i used a small nail to touch it. take a flash light and look down both holes and make sure the little metal clip hasn't gotten pushed to far down.
okay, somewhere to start. I think it's a ground or loose wire. I get power outa te1 and e1 grounds so IDK. Sometimes the light will momentarily go away car drive fine and then the light comes back and car runs like crap.

[mustangnick88]

nope, nothing in the diagnostics slots. Regardless of engine problems when you you jump te1 and e1 it should flash in the dash, right? When I just turned the ignition on it flickered a few times and then went constant cel?

[92nsx]

St. Cloud, MN????? :naughty:

[mustangnick88]

St. Cloud, MN????? :naughty:nope, st. cloud fllorida

[92nsx]

:cry: I wanted a ride in a 1JZ. Sorry I'm 7M and don't know squat about JZ's GL

[mustangnick88]

:cry: I wanted a ride in a 1JZ. Sorry I'm 7M and don't know squat about JZ's GLnot much of a ride as of this moment. I have big dreams for it. It's a 1jz w/ gt35r running off e85.

[GotTurbos?]

Not what you want to hear... but mine did the same thing when my ECU was blown.

[mustangnick88]

Not what you want to hear... but mine did the same thing when my ECU was blown.exactly what I was thinkin

[tissimo]

Not what you want to hear... but mine did the same thing when my ECU was blown.

+1 Code 0 = ecu = solid cel

[mustangnick88]

+1 Code 0 = ecu = solid celopened the ecu and nothing is burnt. Anyone in central florida want to test my ecu or let me try yours. I'll hook you up with lunch + gas money.