arizzle's 92 teal project2!

[arizzle]

well most of you guys know that i had a flat black 87 supra that had hit rod knock, and i just didnt really want to bether building it up so i parted it!


now i just recently just picked up a 92 TEAL HT sunroof from a former SM and SF member. the cars a 5sp, 7mgte, has a few minor exterior problems, and has a BHG!!!

the goal for this car is to make it look clean and have some what power! :evil2:

http://i201.photobucket.com/albums/aa89/kizzlo/1.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/2.jpg
this is were the supra sits right now, front bumper needs to be fixed.

http://i201.photobucket.com/albums/aa89/kizzlo/23.jpg
the motor needs a good cleaning the old battery had exploded so it corroded the rad support.

http://i201.photobucket.com/albums/aa89/kizzlo/24.jpg
still low K's

http://i201.photobucket.com/albums/aa89/kizzlo/3.jpg
the rear view, tail lights need to be replaced. going to replace with a set of JDM's , has a dark gray interior cloth.


parts ordered:
-new timing belt
-1.2 MHG hks
-arp bolts
-headgasket set
-JDM rain gaurds
-JDM foglight capsules

parts from other project:
-Jdm tails
-89+ mirrors
-89+ 3 PCS WING
-tokico ILL w/ eibachs *car doesnt have TEMs manually adjusting*
-24x12x3 intercooler
-driftmotion catch can
-EURO 89+ markers

parts to come:
-18x8.5 / 18x9.5 RP01 ENKEI's bronze
-kumho's 235/40/18
-kumho's 275/35/18
(RIMS AND TIRES ORIGINALLY OF RANDYS CAR:biglaugh:)

[Turbo Drifter]

Good luck man thays car is a great starting point. I love the interior and hard top sunroof. Glad Jason sold it and did not part it out.

Good luck with it.

[arizzle]

Good luck man thays car is a great starting point. I love the interior and hard top sunroof. Glad Jason sold it and did not part it out.

Good luck with it.

thanks man, yeah i was glad it was still for sale, it just happened to be at the right time :icon_bigg ill keep this thread updated as possible.

[suprastanger507mgte]

Awesome. I've got two of these ...identical ones. 7m and a 1.5 :)
Teal is a very nice color and dirst does not show on it so less wahses needed lol.

[jdemara]

hey!! i think i saw u drivin in richmond by the automall today!
supra looks pretty clean!
i got a red 91 turbo 5 speed targa

[arizzle]

hey!! i think i saw u drivin in richmond by the automall today!
supra looks pretty clean!
i got a red 91 turbo 5 speed targa

haha i dont think it was me man =P lol, the cars in the shop at the moment and i wasnt near richmond all day:sarcasm: not unless theres someone locally with a teal in BC!!! i thought i was the only one!

[jdemara]

well i saw the exact same thing, teal, like a 90 or 91 probably with the turbo badge on the back and everything! weirddd!

im workin on doin my HG right now as well! haha

[arizzle]

well heres a few pictures of were the car sits right now.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0194.jpg
the number6 cylinder and number1 was were the BHG was the rings around the cylinder of the HG was oval not round!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0195.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0196.jpg
the head off the motor and just getting rid of all the accessories dropped off the head this morning ahd hopefully have it for tomorrow!

[arizzle]

well i saw the exact same thing, teal, like a 90 or 91 probably with the turbo badge on the back and everything! weirddd!

im workin on doin my HG right now as well! haha

haha weird!! i want to now who owns that,

yeah ^^^ little updates of what i did today,

[jdemara]

are you machining your head and block as well for the MHG?
if so, where at?

[arizzle]

are you machining your head and block as well for the MHG?
if so, where at?


im just doing a good TLC cleaning on the block but the head im getting it machined, at SR machining in vancouver its 250 for the full clean, mill, etc and also im getting the valve stem seals done also, so yeah its cheapier thene a few local shops.

[Turbo Drifter]

There are a few Teal 92's running around town. When I worked at Toyota we had 3 customers with 92's, one was a leather Auto Teal and the other two were Leather 5spd's one black and one red I belive.

At any rate you have a rare car!

Jeremy

[Mr.Cool]

Congrats and Good luck.

[omfgitsdonovan]

i really like the paint color on your supra. are you keeping it the same color or do oyu have plans for the future?

[HKS_TRD]

Sweet car dude, Teal 92s always make me feel warm and fuzzy :icon_bigg

[arizzle]

Sweet car dude, Teal 92s always make me feel warm and fuzzy :icon_bigg
thanks man, your car makes me warm and fuzy!


i really like the paint color on your supra. are you keeping it the same color or do oyu have plans for the future?yeah i like the color also, im just going to get it respray'd since theres a big ding on the door front bumpers badly scratched, and no spoiler and mirror. but you'll just have to wait and see :naughty:


There are a few Teal 92's running around town. When I worked at Toyota we had 3 customers with 92's, one was a leather Auto Teal and the other two were Leather 5spd's one black and one red I belive.

At any rate you have a rare car!

Jeremy

ive never seen a teal around town except for mine ! lol
but glad theres more out there,

[arizzle]

hey guys well a bit of a update-

got the motor running lastnight at 12am!!!! it started up like a dream, then was puffin out white smoke! i freaked out and just let it idle then it went away after a good hard drive!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0239.jpg
still havent had time to clean some of the parts.

added the mid section of the 3pc from my old supra today =D
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0241.jpg

installed the JDM tail lights from the old project, it was a pain removing the mid section lens.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0242.jpg


what do you guys think so far? dont worry guys the mirror and the wing will be painted possibly next week. and i still havent put up any picture of the interior. more to come =D

just a picture of the damaged side of the bumper.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0246.jpg

picked up a set of JDM rain gaurds
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0247.jpg

and these came in today =D
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0245.jpg

replaced the dmg mirror with a new one.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0240.jpg

can't forget about the rims i got with the car =D randy's old rims
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0202.jpg

[HKS_TRD]

Lookin sweet!

What exactly is involved in removing the lens from the centre piece between the lights?

[arizzle]

Lookin sweet!

What exactly is involved in removing the lens from the centre piece between the lights?


theres 4 delicate tabs on on the top and 2 on each sides, then it should slide out. good thing i broke the tabs on the broken one.

[arizzle]

well update i put all those parts on, but installed my old tokico ILL with eibach's, and brembo front cross drills just waiting to install the rear! ill have a picture tom, day and night shots,

[arizzle]

well here's more updates i just fully cleaned the whole car! and added the rims and took the suspension from my old project.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0265.jpg
installed the euro markers, lowered on eibach,a 3dollar home depot license relocater.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0266.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0270.jpg
275`s! look nice without the mudflaps, jdm tails on, wing and antenna hole being done moday.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0277.jpg
yesterday installed a set of brembos and hawks.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0274.jpg
jsut bought E-codes =D picking up HID`s tonight
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0269.jpg
me and my old project, which is my Gf`s car.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0266.jpg

things to be installed, hks jdm hi-power that came with the car wé a bent tip and a greddy type S bov.

things i still need to fab is 2.5in intercooler piping, and still need to order BIC DP.

[becauseican]

Good progress so far, I almost picked up that car, but i got to many projects already......man those wheels look really good on the teal. Where are you gettin the HID's from?

Randy

[arizzle]

Good progress so far, I almost picked up that car, but i got to many projects already......man those wheels look really good on the teal. Where are you gettin the HID's from?

Randy


thanks man, yeah u do got lots of projects i saw your 4runner in another forum looks good,

theres a guy i deal with in surrey, there 35watt hids i've used his stuff for alomst 2 years so i can say good quality. i just picked up a set of 35watt 5000k hi/lo but hi's arnt hid's

[arizzle]

bit more upgrades,

BIC DP
http://i201.photobucket.com/albums/aa89/kizzlo/BICTP.jpg
custom stainless steel test pipe still need to weld on 2hole flange
http://i201.photobucket.com/albums/aa89/kizzlo/testpipe.jpg
euro capsules at night, w/ hella bulbs and euro markers lite.
http://i201.photobucket.com/albums/aa89/kizzlo/FRONTFOG.jpg
headlights up w/ hella e-codes and 35watt 5000K HID's
http://i201.photobucket.com/albums/aa89/kizzlo/hids-1.jpg

going to be installing the DP test pipe and a hi-power hks tonight, ninja604's old exhaust the tow truck driver dented up the tip so i just fixed it, more pictures to come.

[Turbo Drifter]

Car is looking great!!! I knew those wheels would looks awesome on that colour. Send me a PM with the contact info and $$ for the HID guy.

Your going to love that exhaust, I had that very one on my 7m and 1jz sounded great on them all.

Keep it up man!!

Jeremy

[arizzle]

well more updates,

i had installed a HKS hi-power , Custom TP and a BIC DP, by far this is one of the best sounding exhaust i've heard by far besides BIC's :icon_bigg

while the install had found a huge OIL LEAK!!! its coming from the cam seals, that i had replaced with the HG job but iunno so im re-doing that and the crank seal tomorrow.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0370.jpg
this is the exhaust that jason gave me with the car, it had a bent up tip but i fix'd it =D
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0373.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0378.jpg
and a little shot of the TP that i had to rig up, thanks to Randy@BIC for the flanges and bolts, and also the DP he had one in-stock!
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0380.jpg
BIC DP want to make the engine bay as stock as possibly so put the stock heat shield on =D
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0386.jpg

im currently wingless and mirror less had dropped it off and expexting it tom after noon =D
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0379.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0376.jpg

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0372.jpg
the oil leak after cooling my car and it sitting for 5 min!

well more to come,

[super.secret.supra.club]

omg, the oil leak makes me pissed for some reasaon. i guess its cuz i have my own. lol.

ed.d.

[cruisnhard]

I definetly like it. The color with that wheel choice looks great IMO.

[arizzle]

omg, the oil leak makes me pissed for some reasaon. i guess its cuz i have my own. lol.

ed.d.

haha yeah makes me pissed to but theres nothing right now i can do so yeah, but im going to be working on it tonight =D, im tired of doing daily oil changes lol


I definetly like it. The color with that wheel choice looks great IMO.

thanks man, i love the color combo also, but i still want something with a dish.

[arizzle]

ok well i got more updates that i just did, i paid a visit my paint guy and he had all my stuff done and ready for me =D, he even got to remove the antenna hole.\

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0387.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0394.jpg
got 2 new mirrors painted, took off the original driver side because the mirror shakes like crazy.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0388.jpg
heres the old red spoiler =D lol, looks alot better and paint match is flawless!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0390.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0392.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0393.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0391.jpg
and heres the ends had the antenna hole covered and looks alot better,
still havent installed them just waiting on new clips from oem cause my old ones are just not going to cut it lol,

Still have more stuff to do =D, hoping to have a complete paint job in the next few months =D the same color of coarse and going to get the bumper fixed and a bomex lip =D,

hoping to have some performance mods soon,

[Boosted516]

im in love with this car....i wish i could find a teal supra :*(

[arizzle]

well just a bit of a update.

so lately i've been busy trying to get the car running properly, just recently i had changed the cam seals and the lower crank seal a second time around! now the car doesnt leak oil! damn OEM seals. also did a engine bay clean car ran fine after the power wash =S my last one didnt lol

then i installed a a 10" sub sounds great with the stock speakers and also a JVC head unit, waiting to save up for a pioneer DD DVD head unit.

things i've just recently ordered and picked up and installing in the next couple weeks.
-greddy type S BOV
-LEX maf
-safc-II
-24x12x3 iC from my last build
-NBI stock polished FFIM * made by sethron* i traded my BLK parts car for it.
also comes with a alt relocater with a 7m badge
-innovation WB

things i still need to order
-walbro
-FRP aeromotive
-boost controller
-550's
-then dyno!!!!!!!!!!!!!!!!!!!!!!!

will post pictures or parts once i get a time to.

[arizzle]

just a few pictures of the parts ive gotten and collected.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0401.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0402.jpg
24x12x3 in from my last build still good shape only put in 4k

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0404.jpg
a brand spanking new safc-II

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0405.jpg
lex maf i had bought from a SMM

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0408.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0410.jpg
found this locally! traded this for my black parts car =D also came with a Al relocator, the guy who had it never installed it. it was made by sethron.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0406.jpg
7m alternater bracket.

hoping to install these soon, as i blew one of the upper plastic IC pipe in half!

also installed my HKS TT that came with the car today, alot better then sitting in the car waiting for it to cool lol.

[arizzle]

well little bit more updates i've got done.

i found a JDM parts car locally with a shadow gray interior, so i picked up a few things like weather stripping $10, mint shadow hatch cover $150, a rough condition right rear section $10, and a new 10" sub boc 17.98 :icon_bigg,

the rear section on the car was in rough shape due to he was a hockey player with big hockey bags and tore up the backend,

BEFORE:
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0423.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0424.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0422.jpg

AFTER:
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0425.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0427.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0428.jpg

now i can see through my rear hatch :biglaugh:

[Turbo Drifter]

Very nice and very luck to fine any Shadow grey parts at all let alone the parts you needed.

Keep it up man!

Jeremy

p.s. When dose it go in for body work?

[arizzle]

Very nice and very luck to fine any Shadow grey parts at all let alone the parts you needed.

Keep it up man!

Jeremy

p.s. When dose it go in for body work?

yeah i was lucky to find the parts local!!! thanks man,

well im still set on spring, once i get everything installed cause i dont want to paint then accidentally scratch it lol. :cry:, but i think im going to get the front bumper fix'd its a eye sore lol but still debating if i want to put a A-duct, i havent seen a teal with one yet so i dont know how it'll look lol.

[Turbo Drifter]

They look great on any color, just rememeber to get a OEM one for the best fit and hardware.

Jeremy

[Loki]

Car is looking good, those wheels look great with that colour.

[arizzle]

They look great on any color, just rememeber to get a OEM one for the best fit and hardware.

Jeremy

yeah i'm on the search for a OEM but its hard, i hope it'll look good lol.:icon_bigg


Car is looking good, those wheels look great with that colour.

thanks man, i was just lucky jason didnt sell the rims when he was :biglaugh:, but i wish it had a dish lol.





Well just a little bit more update, i just got another set of HID's for the Fogs, a new front fender OE teal moulding the last one in canada he said:aigo:, and also JDM bubble markers:biglaugh:,

Also i sold the JDM raingaurds i just wasnt feeling it anymore.

ill post pix when i get a chance.

[HKS_TRD]

Wow good to see progress!

[arizzle]

Wow good to see progress!

thanks man its slowly coming along. :icon_bigg

well i just picked up a FIPK from duane, going to pick up a larger cone like the one i had on my flatblack project:evil2:. and since its been raining lots i had been able to do anything.

[7MGTESUPRAMAN]

I just read through your thread and I must say you have a nice build going on. The car is looking good keep up the good work.

[EthanMKIII]

Nice, how long till your done?

[arizzle]

well little bit of a update, i picked up a set of 3000k fogs hid's from a local forum but one of the ballast dont work so ill post pictures once its all settled and done.

also picked up a DD 95 STS:evil2:, and im parking my supra for the winter to slap on all the parts i got sitting in my room.

[upgradedsupra]

well little bit of a update, i picked up a set of 3000k fogs hid's from a local forum but one of the ballast dont work so ill post pictures once its all settled and done.

also picked up a DD 95 STS:evil2:, and im parking my supra for the winter to slap on all the parts i got sitting in my room.

You have time to work on it so get at it. ;)

[CanadianLurch]

read through your build and the car is looking great. i have never seen a teal supra before! when you getting it painted? im looking forward to getting my pearl white redone!

[shaeff]

Just read through. Looking great! :)

[arizzle]

You have time to work on it so get at it. ;)
lol i should have time during the winter, just need to get my DD on the road :naughty:


read through your build and the car is looking great. i have never seen a teal supra before! when you getting it painted? im looking forward to getting my pearl white redone!
thanks man! im pulling the bumper out once its parked and im going to repair it and possibly get a a-duct installed while its out and have it sprayed spring or maybe earlier! my cars one color now that all that matters:biglaugh:


Just read through. Looking great! :)
thanks man, ill post more once i get working on it.



well bit of a update, i switched up my hids and he gave me h4's lol, so im just going to switch my pure white 4300K with the 6000K i just got, and try to retro the pure white h4 on my fogs.:aigo:

[arizzle]

well i just got my spec-b2 shine lip the other day, not going to install until i get my bumper out for fixing, im parking my car this sunday, so i will post pictures of parts that i install during the winter!

[JDMMA70]

This update requires pics NOW ;)

[arizzle]

This update requires pics NOW ;)

haha i wich i had pictures to post! lol i will take some of my winter mod lol stockers!:evil2:

[JDMMA70]

haha i wich i had pictures to post! lol i will take some of my winter mod lol stockers!:evil2:

Go get yourself a Vault maybe that will get you going
http://www.youtube.com/watch?v=-ftGUG7GRLE :sarcasm::biglaugh:

Get to it!
:icon_bigg

[arizzle]

Go get yourself a Vault maybe that will get you going
http://www.youtube.com/watch?v=-ftGUG7GRLE :sarcasm::biglaugh:

Get to it!
:icon_bigg


haha yeah a heated vault! lol but dont worry ill get pix up hopefully tonight!:biglaugh:

[arizzle]

ok well ive been having some heating problems, my car would slowly overheat and get 3/4th up the gauge, and on friday on my way to my GF house the car got really hot! i had to pull over. Mind you i took everyones advice and replace the thermostat and fan clutch. i did it and my car still over heated.

now the car is sitting infront of my GF's house and i found the problem. the thermostate was stuck closed! it frooze it was -18 out friday morning and i had to park my car outside on the street. so now im just going to leave it till it stops snowing, and replace it again and the fluid again.

but here are some pictures the night i replaced my thermostat and i got stuck it the snow infront of my GF house!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0579.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0580.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0582.jpg

well christmas eve im hoping on finishing my caddy for my DD and then im going to be parking her till it gets warm out to work on her. i just hope i didnt BHG when it overheated! but we'll just have to wait and see.

[suprahero]

That's a gorgeous car sir. You can keep the snow though. I wouldn't know what to do if we got snow like that down here.

[JDMMA70]

ok well ive been having some heating problems, my car would slowly overheat and get 3/4th up the gauge, and on friday on my way to my GF house the car got really hot! i had to pull over. Mind you i took everyones advice and replace the thermostat and fan clutch. i did it and my car still over heated.

now the car is sitting infront of my GF's house and i found the problem. the thermostate was stuck closed! it frooze it was -18 out friday morning and i had to park my car outside on the street. so now im just going to leave it till it stops snowing, and replace it again and the fluid again.

but here are some pictures the night i replaced my thermostat and i got stuck it the snow infront of my GF house!


well christmas eve im hoping on finishing my caddy for my DD and then im going to be parking her till it gets warm out to work on her. i just hope i didnt BHG when it overheated! but we'll just have to wait and see.

MHG are tough but you can always check the oil.

[upgradedsupra]

That's a gorgeous car sir. You can keep the snow though. I wouldn't know what to do if we got snow like that down here.


NOOOOOOOOO! I hate snow and moved away from it, or at least I thought I did. :cry:

[arizzle]

That's a gorgeous car sir. You can keep the snow though. I wouldn't know what to do if we got snow like that down here.

thank you sir. i just cant wait till the snows all gone!


MHG are tough but you can always check the oil.
yeah i check the oil, but no coolent at all,


NOOOOOOOOO! I hate snow and moved away from it, or at least I thought I did. :cry:

yeah i hate the snow also! yeah well you moved to the right place, but this years different! theres snow not rain!!!!

i took this lastnight when it stopped snowing for 15min, and now the snow is up to my bumper:3d_frown:

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0586.jpg

[upgradedsupra]

thank you sir. i just cant wait till the snows all gone!


yeah i check the oil, but no coolent at all,



yeah i hate the snow also! yeah well you moved to the right place, but this years different! theres snow not rain!!!!

i took this lastnight when it stopped snowing for 15min, and now the snow is up to my bumper:3d_frown:



Yeah, I pulled out of my driveway to go to work and ..... I got stuck! I stayed home because of this white crap. :cry:

[suprahero]

Yeah, I pulled out of my driveway to go to work and ..... I got stuck! I stayed home because I had a perfect excuse not to go. :cry:

FTFY.............:evil2:

[upgradedsupra]

FTFY.............:evil2:

Have I lost it? WTF is FTFY?

[Turbo Drifter]

Just need good snow tires!! I have 4 Toyo Grit HT's or something on the g35 and it gets me anywhere. I have been impressed by it to say the least.

The one time I drove the Supra in the snow was fine with snow tires. I tried once with the summer tires and slid down my drive way to the snow bank and there is stayed for a week lol!!

Looks like more snow is coming tomorrow night and all day Wednesday. :love:

Jeremy

p.s. sucks about the thermostat, was it a Toyota one?

[arizzle]

Yeah, I pulled out of my driveway to go to work and ..... I got stuck! I stayed home because of this white crap. :cry:

shitty deal well i left my house at 630 this morning an i got to work at 8 and for normal drive it takes me about 5min drive but i had to bus!! i havent taken a bus in 2 years!!!:cry::nono:

[upgradedsupra]

shitty deal well i left my house at 630 this morning an i got to work at 8 and for normal drive it takes me about 5min drive but i had to bus!! i havent taken a bus in 2 years!!!:cry::nono:


LOL, I stayed home, I don't take the bus, especially if I go to work which already takes me 40 mins on a good day, and that's in a car. :aigo:

[arizzle]

Just need good snow tires!! I have 4 Toyo Grit HT's or something on the g35 and it gets me anywhere. I have been impressed by it to say the least.

The one time I drove the Supra in the snow was fine with snow tires. I tried once with the summer tires and slid down my drive way to the snow bank and there is stayed for a week lol!!

Looks like more snow is coming tomorrow night and all day Wednesday. :love:

Jeremy

p.s. sucks about the thermostat, was it a Toyota one?

nice, toyo's are suppose to be good. but you have traction control which will help a littlebit lol! my bmw has nokian's and there awsome! but its parked also my GF has her expedition out so i dont need to worry for now lol:naughty:

yeah i drove the supra and it was fine, but it jus over heats and i dont want to push it that far, i just have 2 8L water jugs in the back:evil2:

yeah snow all through christmas!

and no its a lordco thermo, but i did order one so i just have to wait till its in they said after new years so yah.:aigo:

[arizzle]

LOL, I stayed home, I don't take the bus, especially if I go to work which already takes me 40 mins on a good day, and that's in a car. :aigo:

oh man that sucks! i had to come in 5 out of 48 people came in and im 1 of the 5 lol.:nono:

[upgradedsupra]

oh man that sucks! i had to come in 5 out of 48 people came in and im 1 of the 5 lol.:nono:

Nah, I have a holiday now. I would go if I could move but unless the snow melts in my lane way, I will be home tomorrow too. My car is like a snow plow! We have over a foot of snow here!

Duane

[arizzle]

Nah, I have a holiday now. I would go if I could move but unless the snow melts in my lane way, I will be home tomorrow too. My car is like a snow plow! We have over a foot of snow here!

Duane

haah yeah i wouldnt dought it! and you cars in a back lane also!! all the main roads arn't that great also! lastnight on my way home the snow plow truck broke down! he over heated! :aigo:, lucky you i wanted to stay home but can't.

[Turbo Drifter]

haah yeah i wouldnt dought it! and you cars in a back lane also!! all the main roads arn't that great also! lastnight on my way home the snow plow truck broke down! he over heated! :aigo:, lucky you i wanted to stay home but can't.

Yeah I'm working from home also, no way I was going ot drive in to work when I can do it all here.

The Trac and stability control on the g35 are nice, take a bit to get used to. With it lowered its not getting around too good right now, it just pushes a wall of snow. It dose keep going at least and has not got stuck yet.

I measured today and at my place I got 35cm of snow yesterday :naughty:

[arizzle]

Yeah I'm working from home also, no way I was going ot drive in to work when I can do it all here.

The Trac and stability control on the g35 are nice, take a bit to get used to. With it lowered its not getting around too good right now, it just pushes a wall of snow. It dose keep going at least and has not got stuck yet.

I measured today and at my place I got 35cm of snow yesterday :naughty:

yeah im just not to fond of traction control, the supra's ABS doesnt even go when im slipping while braking it thinks im just stopped! lol

yeah the bmw is so low that the front is about 3in off the ground the bumper that is without the lip! but still hasn't got stuck also which is good.

i still have to measure the snow in burnaby, its still snowing at my work it sucks!:aigo:

[suprahero]

Have I lost it? WTF is FTFY?



Duane FTFY.........Fixed this for you. I had to alter your post a little bit.........:biglaugh:

You'd better not go crying to SC either...........:evil2:

Thread jack over Arizzle.

[upgradedsupra]

Duane FTFY.........Fixed this for you. I had to alter your post a little bit.........:biglaugh:

You'd better not go crying to SC either...........:evil2:

Thread jack over Arizzle.

You don't wanna play this game with me.. ;)

[suprahero]

I've played it before even though I'm at a disadvantage...........at least I didn't change your post to make you sound gay........:biglaugh:

[arizzle]

oh man you guys must be bored! lol.

well update, took the supra out lastnight didn't over heat!! but im still running the lordco thermostat still not the OE but i just replaced the coolent and im going to be doing another coolent flush once i get my hands on a OE thermo.

[suprahero]

Not running hot is goooood. Running hot is baaaaaad. I know you know this already, but I just thought I'd reiterate it for you........yes I am bored.

[upgradedsupra]

I've played it before even though I'm at a disadvantage...........at least I didn't change your post to make you sound gay........:biglaugh:


lol

[arizzle]

welll.. its been a while since posted updates.

here it is car is off the road offically. i started my car in the morning and i warmed it up them all of a sudden i thought it was a BHg cause there was coolent pour and hising out of the supra like a fountain! i shut her down and opened the hood and i found that the bolts holding the thermostat housing is gone and pour for the cap!

so im parking her to fix all the little things that need to be done and doing a IC pipe set-up with that 24x12x3 IC, and also trying to make a mk4 TRD tower bar fit as it was welding in half and i test fitting but doesnt clear the hood :(.

stay tuned!

[ForcedTorque]

I love that new Sig picture! But WTF is up with the front bumper. It may be in this thread, but I'm getting a late start tonight. I haven't read this thread.

[arizzle]

I love that new Sig picture! But WTF is up with the front bumper. It may be in this thread, but I'm getting a late start tonight. I haven't read this thread.

haha thanks man, well the front bumper the previous owner hit a snow bank and bent the frame rail and pushed the bumper in. so as its parked im pulling the bumper off and dropping the bumper off to a bodyshop and the car to a frame shop. the molding still good but yeah needs work, thats why i tried to cover it with my LC plate :evil2::icon_bigg

[upgradedsupra]

Get er done dude! :icon_bigg

[arizzle]

Get er done dude! :icon_bigg

lol slowly but surely! i just picked up my old IC set-up back :icon_bigg, so now im going to be slaping them on soon ill have a pic up. its like what was in my old supra but this time its going to be alot cleaner!

http://i201.photobucket.com/albums/aa89/kizzlo/006.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/008.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/099.jpg

[upgradedsupra]

Great. :) Soon enough, we can have all Supras roll together to the meets and I won't be the one having to keep up. :evil2:

[arizzle]

Great. :) Soon enough, we can have all Supras roll together to the meets and I won't be the one having to keep up. :evil2:

hahaha the last meet i was the one in the back trying to keep up while you swerve through lanes lol.

i hope to have it at the next meet but looks like ill have to try to keep up:cry:

[Turbo Drifter]

Looking good!

You get new wheels for it yet?

Jeremy

[arizzle]

Looking good!

You get new wheels for it yet?

Jeremy

sadly not yet! lol i still havent found anything i like. but hopefully this summer something new after all the changes im going to do:evil2:

[arizzle]

well ive been working on my car over the weekend. i got the stuck bolt in the thermostat housing and removed the front bumper and some of the ic piping to test fit the hardpipes.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0661.jpg
its a bit blurry but thats the best one i got.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0662.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0663.jpg
the damaged side!
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0657.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0658.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0669.jpg

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0664.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0665.jpg
the new deck i installed lastweek:) got it for a HID set up and install :) comes with navi, gps,car controls and ipod.

[engineer4speed]

You definitely have a beautiful supra. keep making it cleaner and better and better, even though it is already gorgeous. Love the teal.

[Turbo Drifter]

How bad is the damage behind that bumper?

[arizzle]

How bad is the damage behind that bumper?

well the rebar is all bashed up on the driver side. and i looked at the frame rail thats after the Radsupport its pushed and took majority of the hit but the car is still straight. i just need the frame shop to put the rail out a little bit. but as of now thats all i see right now.

[arizzle]

well a bit of a update,

rebar was removed, and i replaced and there was no frame damage! :). the IC is now mounted and some of the piping was install.

the original rebar was badly damaged and i needed my friend SLEGHAMMER :). lol 5min of smashing the rebar came off.

pictures soons

[arizzle]

hey well this is what i got done lastnight and today. was to cold to do anymore.

rebar swapped out.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0671.jpg
rebar was cut out for a a-duct but i changed my mind.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0672.jpg
intercooler mounted lastnight, got some of the piping on.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0673.jpg
piping test fitted.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0679.jpg
mount the mk4 tower bar i picked up for a good price but doesnt allow me to close my hood! and the weld wasn't the clean.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0680.jpg


got bored and mounted my bumper back on to see if it fits properly, also clamped on the shine auto lip! to see what it will look like before its all painted
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0677.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0678.jpg

the intercoolers not sitting straight its lop sided lol. so i have to add washers to lower one side.

bumper will be dropped off weds for paint and hopefully have it all installed this weekend.

[ninja6o4]

Good work man. I'm glad to see you're taking your time and getting it done proper, and took my advice on keeping the paint (vs. going rice primer) :)

[arizzle]

Good work man. I'm glad to see you're taking your time and getting it done proper, and took my advice on keeping the paint (vs. going rice primer) :)

haha yeah man, ive been taking it slow lol. the BHG took magority of my money lol. yeah i kind grew into the color lol. looks nice when its really clean lol.

[Crazy_Tycoon]

the more I look at the different shots of your car the more the teal sort of appeals to me..looking good man

[DETONATION666]

Lip looks sweet ! so does the IC keep up the good work

[arizzle]

the more I look at the different shots of your car the more the teal sort of appeals to me..looking good man

hah ayeah thanks man. i never like teal until i got this car lol.


Lip looks sweet ! so does the IC keep up the good work

thanks man, i haven't touched her for a week. but i got some updates. i just got my bumper in today at work fresh paint and dmgd is fixed :). im going to mound on the lip already tonight hopefully and going to take a few pictures on it on the road this weekend:evil2:

[arizzle]

here are some before and after pictures of the bumper but the new are from my crappy berry cam.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0663.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0662.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/bumpernew.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/bumpernew1.jpg

ill have some pictures up hopefully of the lip mounted :)

[DETONATION666]

I have allot of work to do on mine as well I cant figure out how to make the top of my bumper line up perfectly with the header panel but the weather is starting to get better so I will make the time. The paint came out really well!

[arizzle]

ok guys well heres the update on my car! in HQ lol busted out the REBAL XSI :), i finally mounted the bumper this morning finished all the little details on the IC piping and mount the rims back on! but right after i took my pictures it started to snow!! so i didnt get a chance to take anymore pictures.

http://i201.photobucket.com/albums/aa89/kizzlo/IMG_3224.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/IMG_3226.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/IMG_3232.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/IMG_3235.jpg

im going to take a proper photoshoot hopefully this weekend if it doesnt snow or rain :)

[upgradedsupra]

Looking good. :)

[arizzle]

Looking good. :)

thanks man, i cant wait to see yours now! im ready for a cruise!:evil2:

[upgradedsupra]

thanks man, i cant wait to see yours now! im ready for a cruise!:evil2:

Mine is fine, cruise will be soon. :)

[arizzle]

Mine is fine, cruise will be soon. :)

yeah thats good hoping this snwo will go away soon lol, i had to take the supra off the road again once i only drove it for 30min lol.

[Turbo Drifter]

Looks good man, I was going to take my car to the dyno Sunday, glad I did not after all the snow fell lol.

Keep up the good work!!

Jeremy

[arizzle]

Looks good man, I was going to take my car to the dyno Sunday, glad I did not after all the snow fell lol.

Keep up the good work!!

Jeremy

thanks man, yeah good thing cause the last picture i took it snowed literially 5mins after and i had a hard time going up and down canada way! lol

[mattsplat72]

Nice save are you going to get any parts from the guy in Everett? it sucks two Teals down glad you save this one

[JDMMA70]

he took one look at the colour and couldnt bring himself to part it out.

[arizzle]

Nice save are you going to get any parts from the guy in Everett? it sucks two Teals down glad you save this one

yeah i was thinking of picking up a few parts but im just checking to make sure what parts i need. yeah i saw that 2 teals for part-out! i just couldn't lol. :love:


he took one look at the colour and couldnt bring himself to part it out.

haha that my friend is correct! and i don't see any other teal supras in BC so yeah. its nice to have a different color.:biglaugh:

[arizzle]

well update,

did a compression test yesterday, and also put the car back on the ground with stock struts and H&R springs for now until i can find some coilovers.

the compression says its good, but im still losing coolent so im going to be redoing a headgasket job with new gasket,head studs,oil pump,new clutch and flywheel.

i will post pictures once the shop gets free space and i can pull the motor out to get the block and head properly done.

just a few pix i havent posted.

http://i201.photobucket.com/albums/aa89/kizzlo/_MG_32411.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/_MG_32611.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/_MG_32581.jpg

[Turbo Drifter]

Good luck man, its summer time to get it done and on the road.

[integra08]

I see alot of potential

[Turbo Drifter]

A stock 1jz in it would be awesome.......:love:

[arizzle]

A stock 1jz in it would be awesome.......:love:

haha naw id have to say a stock usdm 2jz :evil2:, but then ive never driven a 5sp 1jz only autos :3d_frown:

[Turbo Drifter]

haha naw id have to say a stock usdm 2jz :evil2:, but then ive never driven a 5sp 1jz only autos :3d_frown:

Meh, my 2jz started as a USDM one. Now I do not have any of the parts that made the USDM engine different from the JDM one. Standalone, HKS cams and 880cc inj.

After all that I should have started with a JDM 2jz LOL.

The stock BPU 1jz is still by far my favorite setup that I have had in my car.

[arizzle]

Meh, my 2jz started as a USDM one. Now I do not have any of the parts that made the USDM engine different from the JDM one. Standalone, HKS cams and 880cc inj.

After all that I should have started with a JDM 2jz LOL.

The stock BPU 1jz is still by far my favorite setup that I have had in my car.

hahaha, yeh thats true shoulda started JDM, i just love the power of the 2jz and the bottom end power.

but i still want to try a 5sp 1jz, the 1jz auto supra its start launch is horrible lol. but highway power its awsome! :icon_bigg

[tekdeus]

Kudos for your persistance dude! Gotta love the TQ of a 3.0L engine.

What ended up happening with the Caddy? Want to hear a crazy coincidence? The very next day Duane sprung a transmission line leak and pulled over on the on ramp from 99 to Hwy 91, almost right across from where you stopped.

[kwnate]

Kudos for your persistance dude! Gotta love the TQ of a 3.0L engine.

What ended up happening with the Caddy? Want to hear a crazy coincidence? The very next day Duane sprung a transmission line leak and pulled over on the on ramp from 99 to Hwy 91, almost right across from where you stopped.

It's a 7m dead zone. Get verizon. Can you hear me now?

[integra08]

The motor swap all depends on the budget

[tbcmorris]

Good job so far

[arizzle]

Kudos for your persistance dude! Gotta love the TQ of a 3.0L engine.

What ended up happening with the Caddy? Want to hear a crazy coincidence? The very next day Duane sprung a transmission line leak and pulled over on the on ramp from 99 to Hwy 91, almost right across from where you stopped.

really!!! well caddy's still in the shop, it wouldnt start like it didnt have any juice in the batt, but is still spins so not siezed i hope lol. starter got fried! so thats whats getting replaced first to crank it over and the starters is in the middle of the v8 under the intake mani!, i guess that bridge doesnt like GM parts!!:aigo:


It's a 7m dead zone. Get verizon. Can you hear me now?

hahah yes i can hear you! but sorry we don't have verizon here :icon_razz


The motor swap all depends on the budget

well my plan was to drop a jdm 2jz, but the motor turned out shit!! and it didn't really follow through after that. so now the 7m is whats in the works.


Good job so far
thanks man, its come a long ways like you car!! :icon_bigg

[arizzle]

well here's some pictures of the car on H&R springs i recently bought off a sm member, i had sold my tokico ILL with the eibach's it just wasn't good, since i also dont have TEMS. so i went back to stock with H&R's

its not much lower but the rear comes closer to the tire, but the front needs some spacers to fill in that gap.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0900.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0904.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0902.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN0905.jpg

[Mr.PFloyd]

car looks great with all the paint matching. Good Job!

[integra08]

I really like the stance.what type of lip is that?

[tbcmorris]

Seventeens??

[Warpath]

Seventeens??

Says 18's in his sig. But I thought they were 17's too. Looks great!!!

[arizzle]

car looks great with all the paint matching. Good Job!

thanks man, well the bumper ended up being a shade darker, but can't really notice from a far :)


I really like the stance.what type of lip is that?
thanks, i think it still needs to be lower :), its a shine autolip spec-b2 very strong, until i drove it into a curb :(, cracked but is fixable :)


Says 18's in his sig. But I thought they were 17's too. Looks great!!!

yeha 18's and 275s in the rear no rubbing or any fender moding :)

[slowmedown]

love the teal. your car came out great

[tekdeus]

Wheels look great. Ride height is fine, I would leave it and just get the spacers for the front!

[Warpath]

yeha 18's and 275s in the rear no rubbing or any fender moding :)


What offsets are you running?

-Jim

[arizzle]

Wheels look great. Ride height is fine, I would leave it and just get the spacers for the front!
thanks, yeah im looking into 10mm spacers for the front


What offsets are you running?

-Jim

they are +35 and +38 rears.

[Warpath]

they are +35 and +38 rears.


Car looks great!! Doing a great job on her!! (do you think you could fit 245's on the front?)

-Jim

[integra08]

How low are you trying to go?

[arizzle]

Car looks great!! Doing a great job on her!! (do you think you could fit 245's on the front?)

-Jim

yeah i wouldn't see why not, i just picked up 2sets of 5mm spacers so im going to put them together to do a extra 10mm's in the front :)


How low are you trying to go?

well i love how the front sits but i think the rear needs to go atleast 1in more :evil2:,

[JDMMA70]

as long as your lip stays attached to the bumper lol

[arizzle]

as long as your lip stays attached to the bumper lol

Hahaha yah, or that, but the lips not coming off even if i want it to, zip ties and factory lip brackets lol.

[na-tsupraking]

Absolutely gorgeous Teal ! :bigthumb: I wish I had a teal supra, their so rare. Wanna trade? ;)

Oh, and updates would be nice :)

[Turbo Drifter]

Fixed yet? its summer and time to cruse!!!!

[arizzle]

Absolutely gorgeous Teal ! :bigthumb: I wish I had a teal supra, their so rare. Wanna trade? ;)

Oh, and updates would be nice :)

hah yeah thanks man, well id trade if you were closer ;)!



Fixed yet? its summer and time to cruse!!!!

hey nope not yet still parked also, the reason is cause i bought brads turbo 57trim, i sent it out for rebuild and im going to be picking it up in calgary since in there for a wedding next week with a few other parts.

as for updates nothing really new,

just ordered a few parts:

-mishomoto rad
-fresh ct26/57T garret internals oil cooled no water!
-RX7 550's

besides that the car runs great just leaking coolent compression is good id suspect a BHG or a pin hole leak. stock turbos smoking like a chimney!:3d_frown:


also on monday i was walking by downtown toyota and as i parked on the street i saw a 92 targa teal 5sp roll in for a tune-up!! i thought i was the only one :cry:

[gurley0916]

also on monday i was walking by downtown toyota and as i parked on the street i saw a 92 targa teal 5sp roll in for a tune-up!! i thought i was the only one :cry:

No your not the only one :icon_razz. Looks like a fun little list of goodies you got there!!

[arizzle]

No your not the only one :icon_razz. Looks like a fun little list of goodies you got there!!

hah yeah, i wish i didn't sell my 60trim from my old supra :(, after all the installs im going to be tuning it with a WB and a safc.

[na-tsupraking]

hah yeah thanks man, well id trade if you were closer ;)!




I will drive to canada and give you my car and make love to you like no woman ever has for your teal :love: hahahaha

[arizzle]

I will drive to canada and give you my car and make love to you like no woman ever has for your teal :love: hahahaha

hahah nicee, you must really want it! it was for sale a while back but i couldn't sell it lol. :love:

[Turbo Drifter]

hahah nicee, you must really want it! it was for sale a while back but i couldn't sell it lol. :love:

Come on time to fix it and get it back on the road, when you getting the turbo?

[arizzle]

Come on time to fix it and get it back on the road, when you getting the turbo?

i am dont you worry, just been busy with other stuff. but i will be picking up my turbo next week sat, i will be there from weds to monday :) looking to source out a safc down there also :)

[kcheng]

such a slow asssssssssssss!! get moving!!

[arizzle]

such a slow asssssssssssss!! get moving!!

hahah i like to take my time :naughty:

[tekdeus]

Will it be ready for the huge Pac NW meet?

[kcheng]

Will it be ready for the huge Pac NW meet?

Of course not. its Aries we are talking about lol

[Turbo Drifter]

Of course not. its Aries we are talking about lol

Are you going to have that sexy MKII there? I want to see that car bad! LOL

[arizzle]

Are you going to have that sexy MKII there? I want to see that car bad! LOL

hahah of course not its kenny your talking to lol!!

unless they have a drifting comp ;)

[kcheng]

unless i get my new passport i aint goin nowhere lol

[arizzle]

unless i get my new passport i aint goin nowhere lol

yeah there was a sick drift comp in calgary!!:evil2:

but i was 2 days to late lol.


well heres a little bit of a update.

i've decided to run a different turbo from the one brad had,

a turbonetics still unsure of the trim but it is a t4 70Ar

and also bought a lex maf and a new accordian pipe.

things to buy.

t4 manifold and waste gate and new v-band waste gate.

will have pictures of the turbo by the next few days.

[Turbo Drifter]

unless i get my new passport i aint goin nowhere lol

You can get a BC enhanced drivers license or a rush put on your passport. I was able to get my passport in 1 week with proof of a trip to the US. All I did was say I have a trip planned to the US and need to get my passport asap.

Would love to see your car down there.

[Turbo Drifter]

p.s. Arizzle you have 14days to get it fixed and on the road again......DO ET!:naughty:

[tekdeus]

Interested to know the details on your T4! I was actually going to suggest going T4 over a CT if you can afford it. The difference in power and top end of my current setup over the 57 trim CT is really huge.

[Turbo Drifter]

Interested to know the details on your T4! I was actually going to suggest going T4 over a CT if you can afford it. The difference in power and top end of my current setup over the 57 trim CT is really huge.

Your new turbo is significantly larger than a 57trim so that would make sense. Getting rid of the CT turbine housing in favor of a T4 is a good idea if you are looking to make power. What size turbo are you looking at getting?

[arizzle]

p.s. Arizzle you have 14days to get it fixed and on the road again......DO ET!:naughty:

haha yeha the count down is in :), im hoping i will be able to get all the parts in and get it tuned.


Interested to know the details on your T4! I was actually going to suggest going T4 over a CT if you can afford it. The difference in power and top end of my current setup over the 57 trim CT is really huge.

yeah i would also lol. i will looking more into it hopefully sunday before i leave calgary. yeha i still have yet to feel what a t4 supra feels like. lol. well i will be going with a x02 manifold and a driftmotion wastegate and possible there down pip.:evil2:

[arizzle]

teaser!

http://i201.photobucket.com/albums/aa89/kizzlo/Turbocharger-T04B-.jpg

its a t04b turbonetics t4/.70ar but im still trying to figure the trim :S as the previous owner sanded the front section for polishing.

[kcheng]

haha yeha the count down is in :), im hoping i will be able to get all the parts in and get it tuned.



yeah i would also lol. i will looking more into it hopefully sunday before i leave calgary. yeha i still have yet to feel what a t4 supra feels like. lol. well i will be going with a x02 manifold and a driftmotion wastegate and possible there down pip.:evil2:


probably feels like a mk2 supra with a ct since you car so porky haha lol

[upgradedsupra]

^^ Get your shit together and be ready for the meet. Like J said, get an enhanced drivers license and your good to go.

Duane

[arizzle]

probably feels like a mk2 supra with a ct since you car so porky haha lol

haha yeha but its still going to be fast :P, you fix your boosting problems?


^^ Get your shit together and be ready for the meet. Like J said, get an enhanced drivers license and your good to go.

Duane

ahahah yeah im trying ive been ordering parts that i needed so i can get it ready :icon_bigg, but might not stay down there might just come for a day or two.

[Turbo Drifter]

haha yeha but its still going to be fast :P, you fix your boosting problems?



ahahah yeah im trying ive been ordering parts that i needed so i can get it ready :icon_bigg, but might not stay down there might just come for a day or two.

Ya got 7 days man.....tick.....tock.....:aigo:

[Turbo Drifter]

How is it coming, I see you are selling the CT and manifold....done yet?

Sorry if you feel I'm harping on you I just want to see that sexy Teal on the road. :evil2:

[arizzle]

How is it coming, I see you are selling the CT and manifold....done yet?

Sorry if you feel I'm harping on you I just want to see that sexy Teal on the road. :evil2:

haha naw man, someones needs to buy my turbo / manifold :evil2:

no worries, it wont be done for a week or so cause ive been working so much :(, and i wont be able to make the PNW meet as im working friday and sat,:cry:


also update since its up lol.

things i got in the past week
-turbonetics t04h
-t4 manifold
-lexmaf
-new accordian
-v-bands(making my own down pipe) :)
-u-bends

just ordered
-v-band t04 adapter,
- -10an Tseries return adapter
- -10an block return
- -4an t series feed adapter
- -4an block feed line
- bunch of an lines and adapter
- 46mm tial rep wastegate

things i need are
- safc
- 550s
- afr

ill start posting pictures once i get started on mounting things :)

[Turbo Drifter]

:3d_frown: 2 months no update.........

[arizzle]

:3d_frown: 2 months no update.........

hahah yeah sorry! i have been busy getting it running properly i will post some new pictures of my set-up.

i did some street tuning with the safc and a wideband, runs so much better and no more heat spikes after the turbo change. but i had a few incidents of a coupler that flew off lol and disappeared!:aigo:

my car was sputtering and cutting out at 3500-redline at 11psi it was cause it was running crazy rich that i had to pull fuel from the safc.

but i will be taking it to the track tonight and hoping for the best.

over all set-up with the turbo at 11psi spring, stock fuel with a wideband and safc tune. :icon_bigg

[Enraged]

haha naw man, someones needs to buy my turbo / manifold :evil2:

no worries, it wont be done for a week or so cause ive been working so much :(, and i wont be able to make the PNW meet as im working friday and sat,:cry:


also update since its up lol.

things i got in the past week
-turbonetics t04h
-t4 manifold
-lexmaf
-new accordian
-v-bands(making my own down pipe) :)
-u-bends

just ordered
-v-band t04 adapter,
- -10an Tseries return adapter
- -10an block return
- -4an t series feed adapter
- -4an block feed line
- bunch of an lines and adapter
- 46mm tial rep wastegate

things i need are
- safc
- 550s
- afr

ill start posting pictures once i get started on mounting things :)

whats a vband t04 adapter?

[arizzle]

whats a vband t04 adapter?


http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-083&Category_Code=ATP-FLS3

i had to buy this cause my rear housing didnt have any flange. and it had to be welded to the rear on my turbo.

[arizzle]

well,

i went to the track friday night, not going to post my 1/4 as it was very horrible!

i was having issues with cutting out past 4500/bogging with a 4500rpm launch and also a really bad slipping clutch!! on my slowest run i managed to do a 98mph shifting at 4300rpm and a bad launch.

saturday i did a full tune up. new KN filter/KN oil filter and new NKG iridiums. and mobil1 oil.

after the tune-up my car idles alot better, and i can not pass 4500 and take her all the way up to red line. car pulls like no tom and after a safc tune WOT my AFR is at 11.2 was at 9.4 and idle was before at 13.5! lol my guess i had fouled plugs

saturday night went for a cruise and my friend with a soarer with a 1jz full 3" exhaust intake, and boost at 15psi. we did a 3rd gear pull and i was 2car lengths by the end of 3rd and kept pulling on him in 4th!! i totally thought he wouldve left me.

will post pictures soon on the engine bay.

my rear main seal is badly leaking and is in need of replacement and im planning on upgrading the clutch also got any good daily clutchs thats good for track use also?

[tekdeus]

I'd suggest an ACT XTSS. Mine holds over 500tq, and is as smooth as stock. Just a bit stiff.

[upgradedsupra]

I know what you ran, it's on mission website. ;)

Duane

[arizzle]

I'd suggest an ACT XTSS. Mine holds over 500tq, and is as smooth as stock. Just a bit stiff.

yeha, i was looking into that. but i was also looking into a full face disc from competition.


I know what you ran, it's on mission website. ;)

Duane

haha it wont be there :P its to slow!! :3d_frown:

[Turbo Drifter]

yeha, i was looking into that. but i was also looking into a full face disc from competition.

Do not get a Competition clutch there awful and totally kill the flywheel. My RPS 3200 and 6 puck is easier to drive that the CC was. :aigo:

[tekdeus]

If you want an ACT XTSS, you should be able to get one for around $550. I bought mine from a vendor that used to be on here, CKanderson. He said they would sell them to HP Freaks who sells them for $750.

[kcheng]

you launched at 4500? holy i just dumped it at 2.5-3ish and it spins through all of 1st lol

[arizzle]

Do not get a Competition clutch there awful and totally kill the flywheel. My RPS 3200 and 6 puck is easier to drive that the CC was. :aigo:

yeah i was looking at that also, price isnt that far from a ACT.


If you want an ACT XTSS, you should be able to get one for around $550. I bought mine from a vendor that used to be on here, CKanderson. He said they would sell them to HP Freaks who sells them for $750.
yeah i was jsut on his site the other day, i used to buy my parts off him, he has great prices. but for now im seeing shat i can get locally :)


you launched at 4500? holy i just dumped it at 2.5-3ish and it spins through all of 1st lol

haha yeah man the first run 4500 drop i bogged lol, ic cause i wasnt putting enough load on the turbo so i would sit on vac! lol then by the end of the night slipping clutch not launching issues.

well your tires are silky smooth bald! goo runs thought. you should've brought your cam on the drive up to squamish.

[arizzle]

well its official! ::bhg::

went to the track lastnight it was running good up until the last 2 runs it started to act funny. every run i checked my coolent and it was good! but the last 2 runs for me was make it or break it, so i did another run cooled it off 2 runs and go back to the side with the temp going nuts! i had coolent before the run lol:3d_frown:

i did get it home but i lost alot of coolent and had to pull over to the side. so the plan is to do another HG but im going to get a better condition head and pulling out the motor for a refresh.

my fastest time lastnight was a 14.6 with a 104mph with a horrible launch! 4500RPM bog!:cry::3d_frown:

[Boosted516]

wanted to tell you your cars currently my desktop background lol

[ForcedTorque]

If you want an ACT XTSS, you should be able to get one for around $550. I bought mine from a vendor that used to be on here, CKanderson. He said they would sell them to HP Freaks who sells them for $750.

I recently tried to get a clutch through CK, and could get no response from him here or from his website. This was shortly after his departure from here. I went with the Action clutch from Driftmotion. It's supposed to hold over 500FT-Lb of torque, but I can't remember the exact number. Price is very nice.

[Turbo Drifter]

I may have a clutch for you if you still need one? LMK

[arizzle]

wanted to tell you your cars currently my desktop background lol


haha nice i wish i had newer pictures!:icon_bigg


I recently tried to get a clutch through CK, and could get no response from him here or from his website. This was shortly after his departure from here. I went with the Action clutch from Driftmotion. It's supposed to hold over 500FT-Lb of torque, but I can't remember the exact number. Price is very nice.

yeha i also emailed CK but nothing also, i no long buy from him cause of his stock! there usually isnt much when i need it!


I may have a clutch for you if you still need one? LMK

pm sent :)


update, i got a newer NA head locally its soo minty fresh. car right now is put away for storage and im slowly piecing parts so it will keep me busy for the new few months. :icon_bigg

im hoping to get to drive it a little bit more then this year and probably get to do a few track days and street legal nights:evil2:

[arizzle]

well thread back from the dead! will post pictures of the latest parts ive gotten.

for a few months just been collecting parts so far ive gotten.

NA head decked/ new valve stems seals.
NRP rings
ARP fly wheel bolts
ARP head studs
HKS 1.2mm MHG
IS300 coil packs
Maft pro/speed/
Used 550RC injectors
LC1 XD1 innovate WB

just needing

gasket kit
bearings
aluminum rad
hoses
6puck clutch(maybe)
titan cam gears

ill get a few pictures up once i get a chance this is just a update of things ive been gathering.

also got a set of NA valve covers which i will be polishing and posting up.

im just hoping to get 400WHP on a stock 7m, which i shouldnt see why not with proper tuning and the turbo i have now.

[arizzle]

well heres a few pictures im hoping to pull the motor out on my vacation after a few days of boarding!! :)

http://i201.photobucket.com/albums/aa89/kizzlo/supra/hks.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/supra/head1.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/supra/rings.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/supra/coil.jpg

sorry for the crappy cell pictures.

[redma70]

Nice polished valve cover :icon_razz

[arizzle]

Nice polished valve cover :icon_razz

haha no no thank you!:naughty:

lol itll look different once im done with them. im going to re-polish both. :evil2:

[arizzle]

just a few more pictures from what i got to pick up today!

http://i201.photobucket.com/albums/aa89/kizzlo/550.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/bar.jpg

i will get pictures once i start tearing the motor out! :)

[gurley0916]

Got a nice little list of goodies there that your collecting.

[tekdeus]

Any idea on the wheel sizes of your turbo? Having a nice solid reliable 400rwhp is pretty sweet to have.

[ForcedTorque]

So why are you using N/A valve covers? Going FFIM? I didn't look backwards.

Be sure to have the used injectors flow tested.

[arizzle]

Got a nice little list of goodies there that your collecting.

thanks man, yeah want all the parts before i tear everything apart :)


Any idea on the wheel sizes of your turbo? Having a nice solid reliable 400rwhp is pretty sweet to have.
i still dont know ive been reading that its a 67trim also a s13 silvia layed down 350 at 15psi with this turbo.

so im hoping ill be able to lay 400 with this turbo. :evil2:


So why are you using N/A valve covers? Going FFIM? I didn't look backwards.

Be sure to have the used injectors flow tested.

im going FFIM later on but for now im going NA it'll clean it up a bit with the IS300 coils. just something different.

yeah they been flow tested and also new filters where installed.

[arizzle]

well.......

ive decided to scrap the stock 7m build! LOL

i got a smoking deal on a disassembled 7m

- .20 over JE pistons
- H eagle rods
- balanced 7m crank
- clevit bearings

so i will be pulling my motor out as i found a buyer.

also will be picking up the motor in the next couple weeks but will post pictures tonight if i have a chance!

no the GOAL IS 500WHP!!!!! Hheheheheheh

i currently put a few this up for sale which are no longer needed.

[ForcedTorque]

Rash decisions.........They're so fun with a Supra!

[JDMMA70]

Nice, pictures are needed!

[arizzle]

Rash decisions.........They're so fun with a Supra!

hah yeah thats what happened when you own a supra! :naughty:


Nice, pictures are needed!

ill post pictures, but there crapp cell pictures! :biglaugh:

[arizzle]

well heres a few pictures.

after 2hrs got everything disconnected but the mounts/driveshaft
http://i201.photobucket.com/albums/aa89/kizzlo/motor3.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/motor1.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/motor.jpg

me so AZN!
http://i201.photobucket.com/albums/aa89/kizzlo/me.jpg

heres the new motor. just needs a good cleaning :)
http://i201.photobucket.com/albums/aa89/kizzlo/newmotor.jpg
eagle rods/JE .20 pistons
http://i201.photobucket.com/albums/aa89/kizzlo/newmotor2.jpg

[kcheng]

aww ur helping the piggy lose weight lol

[arizzle]

aww ur helping the piggy lose weight lol

HAHAHA yea now it probably weights the same as yours without the motor! :3d_frown:


update, got the motor out last night stripped it down, hoping to pick up the new block sometime this week!

also ordered a set of ARP mainstuds but i have to wait 2-3weeks:cry:,
also going to order new set of clevit bearings:icon_bigg

[upgradedsupra]

HAHAHA yea now it probably weights the same as yours without the motor! :3d_frown:


update, got the motor out last night stripped it down, hoping to pick up the new block sometime this week!

also ordered a set of ARP mainstuds but i have to wait 2-3weeks:cry:,
also going to order new set of clevit bearings:icon_bigg

Why 2-3 weeks? Who did you order from? I run OEM bearings btw. ;)

Duane

[arizzle]

Why 2-3 weeks? Who did you order from? I run OEM bearings btw. ;)

Duane

yeah 3 weeks :cry:, lordco got them for 100 special order. yeah i was going to run oem bearings but suprasport has the complete set for 100!! :icon_bigg.


and im not rushing this build, cause im gone for a week of vacation after today.:love:

[tekdeus]

Order them from the states and have them shipped to point roberts here http://www.thelettercarrier.com/ That's how I do 90% of my car part shopping. Faster and cheaper.

[arizzle]

Order them from the states and have them shipped to point roberts here http://www.thelettercarrier.com/ That's how I do 90% of my car part shopping. Faster and cheaper.

yeah i actually send my stuff there also, and im not in a big rush so i decided to wait and save some money :icon_bigg

[arizzle]

heres a few more pictures.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1638.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1639.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1642.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1651.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1652.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1662.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1657.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1666.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1668.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1673.jpg

[tekdeus]

Hope your garage is heated, it's cold out! How come your oil feed line wraps around the turbine like that? You don't want the rubber inside that line getting hot and degrading/clogging the line.

[arizzle]

Hope your garage is heated, it's cold out! How come your oil feed line wraps around the turbine like that? You don't want the rubber inside that line getting hot and degrading/clogging the line.

unfortunately the garage isnt heated:cry:, yeah we did as much work as we could with the doors closed and a mini heater on to keep a bit of heat in,

as for the oil feed, it doesnt wrap around the turbine theres just alot of slack that i just wrapped it around, it stays on the outside of the turbo cause i didnt want to run it through the manifold.

[upgradedsupra]

Good update hope it's read for the spring!

Duane

[arizzle]

update!

picked up a few things and had cancelled my mainstuds and going to be picking up a set locally at mopac!

also ordered a full set of clevit bearings!

shimmed the oil pump 3mm

the block/ crank is at the machine shop getting jet washed / cleaned i should have it by mid this week!

also started polishing the valve covers,turbo houseing and also heat wrapped my manifold/ DP!!

will get pictures up soon!

[arizzle]

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1819.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1822.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1825.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1826.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1828.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1830.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1821.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1818.jpg

[tekdeus]

Looks like 400+hp to me! Even your rubbermaid bin matches your paint perfectly ;)

[arizzle]

Looks like 400+hp to me! Even your rubbermaid bin matches your paint perfectly ;)

haha yeah im hoping so! yeah i know and they were on sale!!:evil2:

[gurley0916]

yeah i know and they were on sale!!:evil2:

Ill have to get some :P

[arizzle]

well update..

i got motor lastnight!!!!!

so i got it on a stand taped her up and sprayd 2 coats of primer!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1877.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1878.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1879.jpg
its a bit blurry but its a AN fitting :)

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1880.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1881.jpg

I'll be putting a few coats of paint tonight and then ill be putting it back together. but the only issue is my clevit bearing havent come in yet. i should be in a week. i will be picking up a set of arp mains tomorrow :)

[BrandonW]

nice, i went with clevit bearings also

i kind of wish i had painted my block the color of that primer you used or some sort of silver but i left it unpainted oh well

[arizzle]

nice, i went with clevit bearings also

i kind of wish i had painted my block the color of that primer you used or some sort of silver but i left it unpainted oh well

nice!!

yeah its just primer i decided to just keep it black, its like a flat black ;) i was going to do red but red and teal kind of clash haha!

[BrandonW]

nice!!

yeah its just primer i decided to just keep it black, its like a flat black ;) i was going to do red but red and teal kind of clash haha!

haha you should have painted it teal

[Enraged]

if you paint it black, you wont see the oil leaks :) could be good or bad.

[arizzle]

if you paint it black, you wont see the oil leaks :) could be good or bad.

hah yeha i know, but i dunno what color i should paint it i was thinking silver. but well have to see i just want a clean / stock looking bay.

[redma70]

Looking good man. Good thing you didnt go red or we would have matching motors lol Teal would have been dope though haha

[arizzle]

hahah yeah i know i was thinking red thought! no joke!

but yeah i think ill see if i can get teal paint for it! :) but i think black will also be sexy!

[Enraged]

teal would be wicked. most automotive paint shops can put paint into a spraybomb for you, so all you need to do is bring in the color code for your car.

[arizzle]

yeah soo true! ill see what i can pull up but if i cant get 1 intime im just gunna go black lol!

[arizzle]

well i painted the block this weekend, it showed up flat black! i thought it was going to be shiny. did almost 4 coats but it looks really nice esp when im done polishing a few parts.

[Green7mgte]

nice. the teal 7mgte's are nice (i own one) rare paint. I got the targa top and leather seats. but I must say your car looks nicer on the outside then mine does. :( just woundering what mods besides the exhaust and downpipe did you put in? also im getting my body repainted you think the color is going to be highly expensive? I hope not, I don't have any paint buddys in my town :(

[arizzle]

nice. the teal 7mgte's are nice (i own one) rare paint. I got the targa top and leather seats. but I must say your car looks nicer on the outside then mine does. :( just woundering what mods besides the exhaust and downpipe did you put in? also im getting my body repainted you think the color is going to be highly expensive? I hope not, I don't have any paint buddys in my town :(

hey thanks man, mines in average shape theres alot of flaw, if you saw the pictures in the beginning i have a few pictures of the dmg when i got it.

as for mods im building the motor a few pages back.

but the motor is def not stock. :evil2:

[Green7mgte]

hey thanks man, mines in average shape theres alot of flaw, if you saw the pictures in the beginning i have a few pictures of the dmg when i got it.

as for mods im building the motor a few pages back.

but the motor is def not stock. :evil2:

right on. well lets see some more updates.. (wishes it was spring) I cant do crap to my car till the weather changes.

[arizzle]

well got my bearings and started to work!!!

lastnight i got the crank in and the arp studs, and the piston and rods.

the arp mainstuds dont really give you a set of where the studs go cause they also come with 2 bolts which should go on cap## as its for the oil pump line to clear! i figured that out at the end of the night when i decided to put the oil pump in!!!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1884.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1886.jpg
all lubed up got a bit crazy with the moly lube!

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1889.jpg
all together and the oil pump installed.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1891.jpg
timing cover mocked up still have to replace the mainseals,

next up is putting the head on either tonight or tomorrow afterwork!

[supraseoul1]

good luck man 92 rare cant wait to c wat it looks like

[BrandonW]

yeah man nice, just got the head on mine this week with the hks stopper gasket and arp studs torqued to 80ft/lbs as per the the instruction in the box since they were new

guess you couldn't get any teal paint for the block in time lol

[arizzle]

yeah man nice, just got the head on mine this week with the hks stopper gasket and arp studs torqued to 80ft/lbs as per the the instruction in the box since they were new

guess you couldn't get any teal paint for the block in time lol

well the motors probably not going in for a while, so im going to see if i can get it before i put it in.

[ninja6o4]

omg really? i'm glad you're enjoying the car, no way I would have the patience to fix a BHG if it took this long! :p heh j/k

good work man, i am really glad you're giving it the attention it deserves.. i'll check back in later when you've decided to go 1J...

[redma70]

Coming along good!!!
I really wish I had the money for my bearings right now :-( lol Its the only thing holding me back

[arizzle]

omg really? i'm glad you're enjoying the car, no way I would have the patience to fix a BHG if it took this long! :p heh j/k

good work man, i am really glad you're giving it the attention it deserves.. i'll check back in later when you've decided to go 1J...

yes really! it had a second BHG! lol

thanks i try my best all thats left after this is body work :)


Coming along good!!!
I really wish I had the money for my bearings right now :-( lol Its the only thing holding me back

thanks man so is your! yeah i ordered mine 2-3 weeks ago i dont remember thats how long it was! lol and i got a smokin deal! 90cnd at lordco so i could let it up!

[redma70]

thanks man so is your! yeah i ordered mine 2-3 weeks ago i dont remember thats how long it was! lol and i got a smokin deal! 90cnd at lordco so i could let it up!

WHAT!!!!! I'm going to lordco lol

EDIT:Nevermind :-( best I can get is $190 lol

[arizzle]

WHAT!!!!! I'm going to lordco lol

EDIT:Nevermind :-( best I can get is $190 lol

haha serious! my guy can probably get it for 100, ill ask him tomorrow but its a special order.



update:
i got to work again today got some hours on the motor ran into a few problems, like i forgot to put the studs in before the washer. mount the head and didnt have a proper sockey my short 12pt 14mm was way to short.

also mounted the fuel rail, heads studs on but not torqued down yet, cleaned the cooling hardlines, put the turbo lines, just needs a good cleaning.

gte cams are in until i find a cressida throttle links/ and bracket cause it hits the pvc line on the cover, also have to polish up the front timing cover and put in a oem timing belt for now until i can afford a greddy t-belt and titan cam gears.

heres a few pictures from earlier.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1896.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1897.jpg

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1898.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1899.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1900.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1907.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1903.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1904.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1906.jpg

[BrandonW]

looks good, your about at the same stage as me

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1903.jpg

i wanted to replace that hose with the braded hose like that, what do you have to do? (that hose that feeds oil from the head to the block or vise versa)

[JDMMA70]

looking good dont forget start up videos

[arizzle]

looks good, your about at the same stage as me

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1903.jpg

i wanted to replace that hose with the braded hose like that, what do you have to do? (that hose that feeds oil from the head to the block or vise versa)

nice! yeah im still far! :icon_evil

umm well the previous owner got it done, the stock adapters are actually removable! and also he cut the valve cover adapter when it was off and welded a AN fitting. im not sure on the size but it would be pretty simple since i now know those adapters come off!:biglaugh:

[BrandonW]

yeah it seem like a better thing to do then that rubber hose, plus that looks better i gotta look into that
(oh and you have your valve covers on and i don't but i have my oil pan on and you don't lol)

[arizzle]

yeah it seem like a better thing to do then that rubber hose, plus that looks better i gotta look into that
(oh and you have your valve covers on and i don't but i have my oil pan on and you don't lol)

yeah looks a 100x better, no the valve cover was for test fitting the AN line, also i tried putting the NA covers and see if the throttle links would work but nope. i should have it all torqued down tomorrow and the cams and a timing belt on and possibly the oil pan.:love:

[redma70]

haha serious! my guy can probably get it for 100, ill ask him tomorrow but its a special order.

Yeah let me know, cause right now the best ive found is 100 american plus shipping.

And the motor is looking good! I also want to do a braided oil line like that on mine.

[HKS_TRD]

Is the braided line -12 or -16

Also have you test fitted to see if it will clear the lower runners and stock alternator bracket and alternator in stock location or are you running a different setup?

Just curious as I have been tinkering with the hose in this area and keen to see what the possibilities are

[arizzle]

Alright ill look into it!

And the braided line mine clears the alternater bracket but 1 of the 2 bolts can't go in. So it'll b mounted with 1 nut and 1 bolt. Ill test fit it tonight and take a picture of how it'll sit.

But I'm planning on running a alternater relocater to clean up the top end of the motor.

[arizzle]

got a good friend come by and he took a few nice pictures but we had poor lighting!

http://i210.photobucket.com/albums/bb115/pascual_marvin/Aries/DSC_0944.jpg
http://i210.photobucket.com/albums/bb115/pascual_marvin/Aries/DSC_0945.jpg
http://i210.photobucket.com/albums/bb115/pascual_marvin/Aries/DSC_0947.jpg
http://i210.photobucket.com/albums/bb115/pascual_marvin/Aries/DSC_0948.jpg
http://i210.photobucket.com/albums/bb115/pascual_marvin/Aries/DSC_0951.jpg
http://i210.photobucket.com/albums/bb115/pascual_marvin/Aries/DSC_0941.jpg

[arizzle]

wells heres more update! i got busy lastnight!

i torqued the head down to 90lbs 4 passes w/ arp moly lube as instructed.
installed the cams, timing belt and timed it, installed one valve cover ( still need to polish other!) , picked up a cressida throttle link to run the NA covers with a gte Intake, installed the rear main seal. and remove the spark plug valley cover to clear up space to install my coils, installed power steering pump, lower rad hose w/ t-bolt clamp, moved the AN fitting for the valve cover to my NA cover.

as of now thats all i can think of!

i still havent installed the oil pan but should be in the next couple days then i can work on the wiring next and finish up polishing misc parts.

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1917.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1915.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1916.jpg
the AN clears the alter bracket and also the fuel rail.
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1913.jpg
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1914.jpg
cressida link to make the NA covers work!

[HKS_TRD]

Nice to see the AN clear

Is it -12 or -16, also have you tried the lower runners on yet?

You seem to have had much better luck than me with it all fitting

[arizzle]

Nice to see the AN clear

Is it -12 or -16, also have you tried the lower runners on yet?

You seem to have had much better luck than me with it all fitting

yeah! the lower runner did fit i just didnt get a chance to take a picture but i will once its done. :icon_bigg






well im running a non water cooled turbo but i was just wondering if anyone plugged holes or ran the DM steel lines, im looking for the cheapest way possible.

[arizzle]

well been busy trying to get this motor together,

i got the harness on and soldered the injector plugs and also cleaned up the wiring by shortening unnecessary long wires. ran the injector clips from under the rail instead of on to clean it up.

ive decided to not run the NA covers as i just go to lazy to get the 1 polished it was in pretty bad shape and its going to need alot of sanding!

im not running just a clean set of GTE covers/ painted the intake manifold / all new clamps / new hoses/ and a few little things here and there to clean up the motor a bit,


also i will need to run a alternator relocater as the AN fittings not letting run the alternator at the orginal spot so i guess thats the down fall of it! but it also clears the intake and such.

parts i will be ordering in the next few days,
-megan rad
-FPR aeromotive
-walbro 255
-few more misc gaskets
-cps cover
-polished rad hose

http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1923.jpg
mounted the turbo
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1924.jpg
just a random rear shot of the motor
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1925.jpg
notice how u cant see the injector wires? also got the Coils on
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1928.jpg
coils
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1929.jpg
front with all the parts on,
http://i201.photobucket.com/albums/aa89/kizzlo/DSCN1932.jpg
took the intake out of my GF bmw to see what it'll look like

[HKS_TRD]

Man that sucks the alternator wont clear

What size is the braided line -12 or -16, if you arent sure, there should be some writing on the fitting

[JDMMA70]

On the old pipe ends used for the stock ct26 water cooling lines. Mine just has a hose that loops it. In the installation manual for my GReddy it instructs to just plug them.

[arizzle]

Man that sucks the alternator wont clear

What size is the braided line -12 or -16, if you arent sure, there should be some writing on the fitting

yeah time to add it to the misc expenses lol!

umm i will get that in the next few days,


also does anyone know what the NA oil stud nut is? i tried a 24 to small. i dont want to buy the wrong socket.

[arizzle]

On the old pipe ends used for the stock ct26 water cooling lines. Mine just has a hose that loops it. In the installation manual for my GReddy it instructs to just plug them.

yeah. im actually just going to plug them, i dont want to spend money on a shiny line lol