PDA

View Full Version : 2jz 300 sc turbo

sluggo42
08-13-2008, 11:10 PM
Is this considered a dirty word?
A guy at work just inherited a 96 300SC that has a 2jz. I smoked him in my 91 stocker, but am wondering if people put turbo kits on these cars much. Here in California, I can't do much at all with my 7M, but thought maybe I could turbo up a 300SC
Is this a stupid idea, or a regularly done thing?
Thanks
mazzer
08-13-2008, 11:46 PM
Is this considered a dirty word?
A guy at work just inherited a 96 300SC that has a 2jz. I smoked him in my 91 stocker, but am wondering if people put turbo kits on these cars much. Here in California, I can't do much at all with my 7M, but thought maybe I could turbo up a 300SC
Is this a stupid idea, or a regularly done thing?
Thanks

very common to see these with GTE swaps , and some na-t.

i'm actually helping a friend perform the gte/v160 ,and supra rear end swap on an sc300
RazoE
08-13-2008, 11:48 PM
MKIV's use alot of SC chassis parts (SC's came out before the MKIV), such as suspension components, and a bunch of parts are interchangeable..

Engine swaps are very common, you can also swap in 1JZ's (they came stock that way in Japan)..
black91turbo
08-13-2008, 11:56 PM
What exactly is preventing you from doing something with the 7M? Or are you implying that you are getting worked by other cars?!
mazzer
08-13-2008, 11:59 PM
what exactly is preventing you from doing something with the 7m? Or are you implying that you are getting worked by other cars?!

chp.
sluggo42
08-14-2008, 12:11 AM
chp.


yup, they don't like jz's in MKIII's here. If it wasn't born with it, fugettaboutit.
Wills7MGTE
09-09-2008, 08:57 PM
like the CHP really knows much about toyotas a few maybe but most don't just dont attract attention like a jackass
86_sports_1jz
09-09-2008, 10:18 PM
they make turbo kits from like boostlogic, wotm, titanmotorsports, etc for the sc300s that want to turbocharge their cars or you can just piece a turbo kit together for a kit u want but that involves a little more work
frontierguy25
09-15-2008, 01:45 PM
I would Buy a 1JZ swap from a Soarer with a R154, make sure that it is from a Soarer with the ECU and harness. The only thing that you should have to do is Extend the Harness about 18 inches and everything is pretty much plug and play. The Swap will cost you about $2500.

Another thing you can do is keep your bottom end and buy the 1JZ swap and just bolt everything on to the 2JZ bottom. So you'll have a 1.5 JZ. But I would for sure do a 1JZ swap over turboing the stock 2J just because it is easier with the the 1JZ ecu.
88supraTT
09-15-2008, 01:51 PM
check my build i have 92 sc300 engine in my car. i figured it would be cheaper becouse with cost of conveting to single and getting a ffim.i still haven't got to the cost of what a 2jzgte motor would run.
SC300fivespd
11-24-2008, 03:52 AM
2jzgte swap preparation here.. swap soon.
RazoE
11-24-2008, 09:46 AM
^--------2JZ swap, eh..?

sure you don't want to ask for donations again..?
Nomad707
11-24-2008, 08:17 PM
actually the past two days i've been helping my friend put in his JDM 2jz twin turbo (two ct20's ftw) into his sc300.. wowzers what a beast it will be.
bmoss85
11-24-2008, 09:40 PM
^--------2JZ swap, eh..?

sure you don't want to ask for donations again..?

rofl!
kabanimk3supra
11-24-2008, 10:07 PM
haye guyz.. I need munay. can I haz?