PDA

View Full Version : Sensor Question



SuPrADr1Ft786
April 10th, 2005, 06:25 PM
Well I got out the head today but accidently, while moving the harness out the way pulled on a sensor and pulled the wire out of it. I wanted to know what kind of sensor it is. Its some sensor underneath the intake manifold right next to the starter, its on the block. I know there is 2 one in the side front of the motor, and the other in the side back part, next to the starter, if anyone can tell me what kind of sensor it is that would be awsome, well thank everyone and have a nice day.

Jetfixr757
April 10th, 2005, 06:57 PM
That sensor is the VSV for the EGR valve, or vacuum switching valve for the exhaust gas recirculation system. If you have your EGR blocked you should not need it and otherwise remove the vacuum lines that operate it. If you have a JDM engine you shouldn't need it as mine came blocked.
William Gabay 89T

lagged
April 10th, 2005, 07:02 PM
or could be a knock sensor.
how many wires go to the sensor? one or two? are there vacuum lines going to and from it?

Supra Blues
April 11th, 2005, 07:19 AM
Also, what color is the plug. Its probabaly the knock sensor wire.

SuPrADr1Ft786
April 12th, 2005, 08:28 AM
Its 1 wire and there were no vacume lines connected. The wire ran from the sensor straight to the harness. So its the vpc thing??? Well thanks u guys. Talk to u guys later. Have a nice day

lagged
April 12th, 2005, 08:37 AM
it is a knock sensor. you want a new one? i have a few lying around...

SuPrADr1Ft786
April 16th, 2005, 02:12 PM
sure, how much?? r they in good condition??? thanks dude