67mm turbo for 1jzgte

[bigdaddygrip]

Noob question, but is a t67 or 67mm turbo too big for a 1jzgte with 550 cc injectors?

[Trust_GTE]

Noob answer, no turbo is too big for a gte motor:icon_bigg. I would go with larger injectors if you'll be using a 67mm, 550s for something like a 61mm or smaller. hth

[csnow]

No, you will be fine on pump with that up to 18 psi. Tissimo ran the 67 on 550's on his 1J with no problems.

[1jzMoe]

what would the response of the 67 be like on the 1jz?

[bigdaddygrip]

thanks for the reply.

[supramanocnsd]

Noob answer, no turbo is too big for a gte motor:icon_bigg. I would go with larger injectors if you'll be using a 67mm, 550s for something like a 61mm or smaller. hth


lol yup...

[MDCmotorsports]

what would the response of the 67 be like on the 1jz?


It all depends on the size the housings (both turbine and compressor), the tune of the engine, exhaust, turbine size, and journal bearing VS ball bearing.

[bigdaddygrip]

67 mm turbo s cover stage p trim wheel with .58 housing

[bigdaddygrip]

It all depends on the size the housings (both turbine and compressor), the tune of the engine, exhaust, turbine size, and journal bearing VS ball bearing.

It is a to4e cover on 67mm compressor and .58 a/r exhaust housing using a p trim exhuast wheel. Let me know what you think.