PDA

View Full Version : ***fuel pressure regulator***



jcr2fast4u
January 16th, 2008, 02:20 AM
hey i was just woundering if any of you guys can help me out i have been searching all around but can't find any insturctions to install it i was just woundering if anyone had some instructions or can take me step by step on the istalation the fuel pressure regulator looks like this.http://i258.photobucket.com/albums/hh278/jcr2fast4u/FPR20BLUE1.jpg
thanks.

noredline
January 16th, 2008, 07:14 AM
hey i was just woundering if any of you guys can help me out i have been searching all around but can't find any insturctions to install it i was just woundering if anyone had some instructions or can take me step by step on the istalation the fuel pressure regulator looks like this.http://i258.photobucket.com/albums/hh278/jcr2fast4u/FPR20BLUE1.jpg
thanks.

The return line from the fuel rail goes to one of the side ports, the return line connects to the bottom port and is hooked up to the stock return line. The vacuum line hooks up to somewhere on the intake manifold.
This was from this thread


http://www.supramania.com/forums/showthread.php?t=56615

ILikeCarsYesIDo
January 16th, 2008, 11:16 AM
That AFPR set up looks off. Where is the fitting that goes into the fuel rail?

IwantMKIII
January 16th, 2008, 12:41 PM
That AFPR set up looks off. Where is the fitting that goes into the fuel rail?

that's what i was wondering

i say return it and just buy an aeromotive kit from driftmotion ;)

iamshawn
January 16th, 2008, 12:57 PM
did you buy it yet ? If not don't buy it save your money for the aeromotive kit. those rubber line won't last you a year with fuel going through it and those fittings are not meant to go on our cars. Who knows what inside that lil 10 dollar regulartor.

nvgc8
January 16th, 2008, 01:35 PM
+1 for the Aeromotive setup. The fuel system is not the place to cut corners on. Running too lean or too rich will kill a motor in a hurry.

americanjebus
January 16th, 2008, 02:03 PM
set up should be same as this.

http://img248.imageshack.us/img248/2932/afpr1gh0.jpg
http://img69.imageshack.us/img69/6670/dscf3319mt6.jpg

I agree with the rest, dont trust those fittings for shit. I can see one popping off and WOT and spraying down your hot engine with gas.

thevork
January 17th, 2008, 03:33 PM
buy this one from jeff corbat
http://cgi.ebay.com/ebaymotors/Supra-Turbo-Aeromotive-Fuel-Pressure-Regulator-Kit-AFPR_W0QQcmdZViewItemQQcategoryZ33553QQihZ005QQitemZ150204530814QQrdZ1QQsspagenameZWDVW

jeff is a nice guy and very trustworthy. A lot of people on these forums have bought his kit.
it comes with installation instructions and the quality is great.
you pay peanuts, you get monkeys. get a proper afpr set.