PDA

View Full Version : hard pipes question


illegal88
09-22-2007, 12:38 PM
does one of those universal kits work?
bowsercake
09-22-2007, 12:46 PM
Universal, applicable everywhere or in all cases; general
tte
09-22-2007, 03:32 PM
Yes. I used a 2.5" universal kit and it worked fine.

Cheers,
Roy
blackout_89t
09-22-2007, 05:05 PM
If you can cut/weld than yes it works.
kyle1jzsupra
09-22-2007, 10:46 PM
r the stock ic pipes 2.5 inches ......lol
Poodles
09-23-2007, 02:29 AM
they change in size along the path...
pimptrizkit
09-23-2007, 02:51 AM
2.5 is a good since to use , i really like my set,

the less couplers you use, you wont have as many boost leak problems
illegal88
09-28-2007, 06:50 PM
what hp is the stock intercooler good for
s383mmber1
09-28-2007, 06:51 PM
Most say around 400HP.... I would look for a ebay replacment after 315 horses...

Does anyone have problems with these piping blowing off at some what "higher" psi? Like 15 or so?
illegal88
09-28-2007, 06:54 PM
Most say around 400HP.... I would look for a ebay replacment after 315 horses...

Does anyone have problems with these piping blowing off at some what "higher" psi? Like 15 or so?my stock has 1 time