Pre 89 and 89+ solid and POLY motor mounts

[becauseican]

Well I have noticed that solid motor mounts are hard to find and nobody has any for us with the pre 89's with the square mounts, so BIC performance has just finnished the prototypes for the pre 89 and the round 89+ mk3's. Both types are direct fit bolt on parts, the pre 89 mounts even have the correct offset of the studs to fit the chassis perfectly just like stock. Grade 8 hardware is included with all mounts. I will probably do a group buy if there is enough interest.

The pre 89 square type solid motormounts are $120,
89+ solids are $90.
I am trying to keep the pre 89 poly mounts under $150.

These are now available for order on our website www.bicperformance.com

we also made a prototype set of Polyurethane pre 89 mounts that i am testing in my car right now. More custom mounts/bushings and parts are also in the works.

89+ Solid Billet Aluminium motormounts
http://www.bicperformance.com/pics/bic%20products/BIC%20motormounts/solid89+(Medium).JPG

Pre 89 Solid motormounts
http://www.bicperformance.com/pics/bic%20products/BIC%20motormounts/solid87a%20(Medium).JPG

Pre 89 Polyurethane motormounts
http://www.bicperformance.com/pics/bic%20products/BIC%20motormounts/87polymountinstalledL%20(Medium).JPG

[TRACKMKIII]

When will the Pre-89 Polyurethane mounts be avaliable?

[Doward]

Pre '89 semi solids wanted here.

[tlo86]

i'd be down for some 89+ solids :) my rubbers are no good :(

[SupraOfDoom]

So, if we have a pre-89 car, but your JZ adapter brakets, do we still have to buy your pre-89 ones or would you be able to go JZ just with the 89+ mounts?

[MK3_300]

Maybe I just missed it but will you be making 89+ poly mounts as well? I am looking for some but have not been able to find any. :nono:

[becauseican]

I will be doing the folllowing for sure: pre 89 solids, pre 89 poly mounts, and 89+ solids. I will be working on making 89+ semi solid/ poly but that probably wont be for a month or so. I am also working on a poly trans mount, it should be ready in a few weeks. I am running the full poly setup in my car including motor mounts and trans mount, and the BIC Nylon subframe spacers.

I have 1 set of 89+ solids and three sets of pre 89 solids ready to ship right now.

[Doward]

Any word on what these items will be costing?

[GeneStarWindGSW]

If i buy the pre 89 mounts, will i also need to buy the brackets as well?

[tlo86]

oh i'd love a trans mount :) how much for the first set of 89+ i have money in my hand... :) although the semi solid sound real nice.. and worth the month wait..

[becauseican]

Any word on what these items will be costing?

Look in first post.

If i buy the pre 89 mounts, will i also need to buy the brackets as well?

Care to elaborate?, do you mean a package deal with the BIC JZ brackets?. I will give you a $10 discount if you buy the brackets and solid mounts together.

These are bolt on replacement motor mounts that will work with the stock brackets, if you have an 89+ chassis you need the 89+ mounts. They will also work with the oem JZA70 brackets and they are drop in replacement for the mk4 2jz motor mounts. If you have the pre 89 chassis with the square mounts you need the pre 89 mounts.

how much for the first set of 89+ i have money in my hand...

The 89+ solids are $105 shipped anywhere within Canada and USA, pm me for payment info.

[starscream5000]

You rock BIC. I'll be lurking in here waiting for poly pre '89s and poly tranny mounts to be ready to ship out.

The tranny mounts are the same regardless of year, correct?

[MK3_300]

You rock BIC. I'll be lurking in here waiting for poly pre '89s and poly tranny mounts to be ready to ship out.

The tranny mounts are the same regardless of year, correct?


I am also Very interrested about a poly trans mount! Keep up the good work!

[becauseican]

They are now available for order through our website www.bicperformance.com

[starscream5000]

Hi Randy, I didn't see the poly engine and tranny mounts on your site, they still being tested before release?

[tlo86]

ordered :)

[becauseican]

Hi Randy, I didn't see the poly engine and tranny mounts on your site, they still being tested before release?

Yes I am still testing them, I just went to the race track last friday and they preformed great. I hope to have some more ready for sale in a few weeks.



TLO86- just got your order, they will be shipped out today or tomorrow, you'll see the mounts in about a week or less.

Randy@BIC

[Doward]

Randy, how's the vibration vs stock, with the polys (pre '89)?

Not worried about it, just curious. I'll be down for poly motor mounts and a poly tranny mount :)

[supra_ed]

wats the word on those poly pre 89 mounts? just wondering.....i should get my block back from machine shop this week.

[becauseican]

Randy, how's the vibration vs stock, with the polys (pre '89)?

Not worried about it, just curious. I'll be down for poly motor mounts and a poly tranny mount :)


There is more vibration than the stock mounts, but not nearly as much as full solid mounts. I would say they are about 60% stiffer than stock. I hope to have the production versions of the poly motor/ trans mounts ready in about two weeks.

Randy@BIC

[becauseican]

Get in on the Group buy while you can, it is open until Oct 31st.

Link: http://www.supramania.com/forums/showthread.php?t=55940

[tlo86]

just got mine :) they look mean

edit: just installed mine wow perfect fit im 100% sure because of these mounts i have no issues with clearance.

[MK3_300]

Any update on the poly trans mount?

[TRACKMKIII]

Any updates on the pre-89 poly mounts? Will you do a group buy for them?

[MK3_300]

Randy, any progress on the 89+ poly engine and trany mounts?

[becauseican]

Sorry guys, I have been so busy with the finishing touches on "Project Cherry Widebody" . The prototypes have been on my car for a few months now and work great. I hope to have the production versions ready before the end of the year.

Randy@BIC

[MK3_300]

Since you are making solid motor mounts, have you thought about making a solid transmission mount in addition to the poly mount currently in development?

[frax]

Any word on the 89+ poly engine mounts

[becauseican]

Any word on the 89+ poly engine mounts

Those should be ready in a few weeks.

[tlo86]

whats project cherry widebody? :):)

hehe NVM

http://www.supramania.com/forums/showthread.php?t=29531

[honestabe]

In for a set for my 87 1JZ with BIC adaptor brackets.

Adam

[frax]

Those should be ready in a few weeks.

ok awesome thanks for the reply

[becauseican]

In for a set for my 87 1JZ with BIC adaptor brackets.

Adam

Just send me an email or pm and ill give you the details.

Randy

[honestabe]

PM sent

[DegreE]

1989 Here

I'm interested in the solids.


Will you have any in stock, ready to ship by Thursday? (Payday hehe)

[becauseican]

1989 Here

I'm interested in the solids.


Will you have any in stock, ready to ship by Thursday? (Payday hehe)

Yes we have lots in stock ready to ship. They can be purchased through our website www.bicperformance.com

[tlo86]

just wanted to say that the solid mounts are not as harsh of a ride as you think they would be. some of you have been following my swap to a 2jzgte these past few months and i bought the solids 4 months ago. i forgot i had them on when i drove out, the vibration was so minimal i noticed it felt better than my 7m. even people ive taken in rides cant believe that they are solid mounts and i have to show them hehe.

i cant wait for the 89+ poly mounts

[Clueless]

I might have to get some

[dragracer]

When is the tranny mount going to be available? Also are the SP DDP in stock or build to order?

Thanks Rich

[becauseican]

The poly trans mounts should se ready in a week or two. I have a few SP ddp's in stock ready to ship.

[honestabe]

Pre-89 solid mount ordered.