Reaper's 1JZ Single Turbo Swap

[The Reaper]

Well this past weekend Tissimo and i installed the single on my 1J

took awhile but finally got it.

FINISHED PRODUCT ON PAGE 2 (http://www.supramania.com/forums/showthread.php?t=52432&page=2)

Garrett T04S 60-1
Drego Manifold
Turbonetics 42mm Racegate
Ebay SSQV
Everything else is stock down to the IC PIPING!

Arriving at the lexus Dealership
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/1988ToyotaSupra.jpg

Getting it up on the lift to remove custom exhaust to remove the twins
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SupraSingleSwap1.jpg

last shot of the gay twins on my 1J
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/Old1JZSupra.jpg

Getting closer
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SupraSingleSwap2.jpg

Getting frustrated :aigo:
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SupraSingleSwap3.jpg

Removing the twins was GAY. such a PITA
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/DamnTwins.jpg

Twins removed BYE BYE! :naughty:
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/ByeByeTwins.jpg

Just for fun got a shot of my new twin Photon Blaster :biglaugh:
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/TwinPhotonBlaster.jpg

Test Fitting Drewgo's Manifold
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/DrewgoManifoldTestFit.jpg

Test Fitting the WG
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/FittingTheWastegate.jpg

Test Fitting the Turbo
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/TurboTestFit2.jpg

A little more Test Fitting to figure out the path of the DP and Dump tube
http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/TurboTestFit.jpg


More pics to come. a friend of mine who took these pics left at 9 on Saturday night. so no finished pics yet. just took the finished pics like an hour ago during a smoke break at work. will post em tomorrow!!

man the sound is awesome. 3 inch turbo back on Drewgo's manifold is NUTS!!!

man im glad i didn't sell this thing HAHAHAHAHA :aigo: :aigo: :aigo:

[tissimo]

i need a hair cut

[drewgo]

Shu guis looks so sexxci.....LOL

[The Reaper]

HAHAHAHAHAH damn drew that manifold sounds nasty

sounds like a singled mkiv with 4 inch exhaust

IM IN LOVE!!!!

........with my car Drew.........not you :)

[csnow]

Josh, you should be careful when working on cars with strings from your shirt hanging down like that into the engine bay.....remember, safety first.

Oh wait, those are your arms :D

[The Reaper]

ROFLMAO oh you are hilARious

yur just mad cause mines swapped and singled, and yours is in pieces :D

[csnow]

Hey, thats not funny. Leave my 2J out of this :)

[drewgo]

2j's are slow...

[Bigzavs]

looks good man, now just get a front mount and piping and go have fun

[The Reaper]

yea i know

i gotta watch the money spending now tho gotta buy baby furniture and what not :)

[csnow]

2j's are slow...

Yeah, your right....what was I thinking :slap:

[The Reaper]

GOT THE FINALIZED PICS!!!!

here ya go ENJOY!

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap2.jpg

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap6.jpg

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap5.jpg

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap4.jpg

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap3.jpg

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap2.jpg

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/SingleSwap1.jpg

and last but not least the location of the BOV

http://i137.photobucket.com/albums/q215/TheReaper31/Single%20Swap%20Pics/BOVPlacement.jpg

[7Mboost]

Haha easier than putting back on good stock twins, video in works?

[The Reaper]

yup got all the boost leaks fixed tonight and the WG creep problem fixed. bitch RIDES OUT!!!!!

i love the 1J!!!!!

[BlackMKIII]

I wish I had enough patience to wait until I had enough money and go single off the bat. Very nice.

[jonny87turbo]

nice :bigthumb:

[The Reaper]

thanks guys.

yea man i was on burnt stock twins for 4 months

[inline6fan]

Clean setup!

Oh and Old skool' Delta gate FTW!

[Brewster]

i love the 1J!!!!!

quoted for PERMANENCE.

[The Reaper]

hahahahahaha yea i admit i bashed the 1J pretty bad in the past. but DAMN this engine is AWESOME!

makes me want to get cams, 550's, afc, and tune it for 18 psi.

right now its at like 10 or 11

[namkiii]

video!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



please

[OneJoeZee]

Very cool, Josh. Now get a pipe made for that filter so you can run it through the snorkel hole for a CAI and also so you can run a hose from the left valver cover PCV vent to keep vacuum on the crankcase. :)

Now you gotta do something about that stock fuel system. :)

I'll be putting my turbo kit back on this weekend hopefully. Got my turbos back and dropped off the turbine housings and other parts with Jose for ceramic coating. I hate that you beat me to upgrading(even though I had mine on for a little bit). lol:slap:

[csnow]

Car pulls very nice and sounds SICK....wait, can a mid life professional in his 30's say SICK? Just doesnt sound right :)

[OneJoeZee]

Where is Josh? At work? I wanna hear more review after driving his newly upgraded 1J for a little bit.

[csnow]

Yeah, he is at work Joe.

I think him and Justin went to grab some lunch.

[OneJoeZee]

Aww, lunch date. That's so sweet.

[suprahero]

Aww, lunch date. That's so sweet.

They really do make a cute couple................:icon_bigg


Looking good Josh. Time for another 1jz burnout video. We can't let Kwnate have the only one. As soon as my clutch is broke in, I'm going to do one.

[OneJoeZee]

As soon as my clutch is broke in, I'm going to do one.
:bsflag:

[suprahero]

You know I wouldn't shit you Joe. The proof is in the pudding, but unfortunately everytime I take a video I can't get it off of the camera............:icon_redf

I've googled and I have the entire manual uploaded but it doesn't tell you how to upload videos from the camera.

Proof.
http://www.sanyo.de/produkte_daten/digitalimaging/camcorder/manual/SANYO_C40_Camera_GB_E.pdf

[drewgo]

Car pulls very nice and sounds SICK....wait, can a mid life professional in his 30's say SICK? Just doesnt sound right :)


I like how you replaced crisis with Professional....:biglaugh:

[suprahero]

I'm in my late thirties, but I dont' feel a day older than 35..........:biglaugh:

[csnow]

I like how you replaced crisis with Professional....:biglaugh:

:1zhelp:

[The Reaper]

hahahahaha you guys crack me up.

it wasn't a lunch date LOL

anywho, the car is awesome, i love power the band. it was a little to smooth like the boost was creeping then we realized that the tension bolt on the top of the WG was only held in by 3 threads, so we tightened it up and it hits harder now.

the car is a BLAST to drive. inside the lexus dealer they said it sounded like a sportsbike flying by hahahaha. inside the car it has an LM race car tone to it. i love it. im very happy i never sold it.

and joe even if i DID beat you to it.....i had to watch my baby get pushed by a semi's trailer to get this set up :(

[tissimo]

:wtc: i thought it was a date...:wtc:

lol

[suprahero]

:wtc: i thought it was a date...:wtc:

lol

He's just using you Tissimo...............:nono:

[The Reaper]

hahahahaha i just now seen this

you guys are killing me

everything seems to be doing good. have a SLIGHT oil leak from the return line on the block side :( and the plugs keep breaking up for some reason

[drewgo]

hahahahaha i just now seen this

you guys are killing me

everything seems to be doing good. have a SLIGHT oil leak from the return line on the block side :( and the plugs keep breaking up for some reason

Do you break up at higher rpm? like 5800+?

[daneyan]

Do you break up at higher rpm? like 5800+?

i break up round there to i wonder what it is. i'm running the ngk 6097's. that's what you're running as well right josh?

[drewgo]

i break up round there to i wonder what it is. i'm running the ngk 6097's. that's what you're running as well right josh?
Check your gapping. They come with a .42 which too much. .28 is where you should be although I opted for .25 to be safe when running high boost. (20+)

[daneyan]

Check your gapping. They come with a .42 which too much. .28 is where you should be although I opted for .25 to be safe when running high boost. (20+)
aight thanks man i'ma do that today.