need na-t help

[brs86supra]

i was wondering for my oil return line. where do i tap the oil pan at for the return line. pics would help a lot. thanks in advance

[s383mmber1]

You want to tap it as far "up" the pan as you want.

Do not put it in interferance with your motor mount....:icon_evil And youll want to make sure the extra oil thats being returned is not spraying at one of your bearings as from my understand, it will wear it down.

If your looking at the pan from the passanger side, youll want it in the top right area.

[brs86supra]

could i just put it near the whole where the oil cooler return line is at

[s383mmber1]

Post up a picture, and ill let you know if it looks ok.

[brs86supra]

here is a picture i got from the tsrm

[s383mmber1]

Thats were i welded mine, but there are better locations.

Find a picture of a oil pan, and ill tell you were you Should weld it correctly.

[brs86supra]

here is the only one i could find so far