2jz ross racing fuel rail

[SMP142]

anyone heard anything about these rails? seems like a good deal to me. think the -8 would handle 1000cc injectors or go for the -10?

http://www.rossmachineracing.com/supra8rail.html
http://www.rossmachineracing.com/supra10rail.html

[GeneStarWindGSW]

never heard about them but they do sure look hella sexy and nice. i have a custom 2JZ fuel rail and it has -6 AN fittings welded to it.

woah how does this work?
http://www.rossmachineracing.com/dualinjassm.html

[SMP142]

its used for a meth injection or you "can" run fuel in them. i dunno about supras, but on other cars i know guys would put a setup like that in for their extra fuel needs instead of upgrading the rail and injectors.

* edit- i would say the car in that picture is using that setup for water injection in place of an air/air intercooler.

[suprastanger507mgte]

IT looks almost identical to the one sold on Supraforums by cowboybepop.

[tissimo]

almost.. i think eric's brackets are different..

[SMP142]

so think the rail is a good deal?

[GeneStarWindGSW]

Sounds good. I Wouldn't get it but if ur going for the higher HPs go for it.

[SD2JZA70]

its used for a meth injection or you "can" run fuel in them. i dunno about supras, but on other cars i know guys would put a setup like that in for their extra fuel needs instead of upgrading the rail and injectors.

* edit- i would say the car in that picture is using that setup for water injection in place of an air/air intercooler.
That supra in the picture is running on methanol and those injectors are spraying meth for intercooling

[figgie]

Ross Machining

nice place to get fuel rail extrusion.

Faily inexpensive too. You can never have to big an Inner Diameter (unless you have a WEAK fuel pump).

[SMP142]

so if i run a -8 feed line on both ends, is that enough to supply a -10 rail? then run a -6 return line out the center? that is what i am planning.

[SMP142]

i got that rail. i will take some pics and post them up asap. its purdy....:love: