HKS BOV install???

[87soup]

I have the HKS (style) BOV from drift motion, but how do i install it???

I have the flange pipe also....

PLEASE HELP

[EvoLuTioN]

hella crazy

[87soup]

What is so crazy???

I just dont understand how the mount it on the pipe with those "c" clip things!!!

Then what vaccum line do you tap into???

Nothing Crazy about it!!!:nono:

[EvoLuTioN]

it's a pain in the ass, i hate those c-clamps, i just took a pair of pliers with a really fine point and had the BOV in the mount and then just push down, it took me a million tries, pain in the ass, stupid and dumbest design ever, and I just had it tapped from my intake manifold

[tlo86]

the vac line is the same vac line for your stock turbo Bypass valve that comes from near the intake manifold

[87soup]

Im installing it on my buddy's Tiburon that has been turbo kited, so there is no factory BOV line... Which one should i tap into???

The C clamp dont make sence to me!!!

How do they work???

[1jzMoe]

you just tap into a line coming off of your intake manifold. The clip sucks putting it on and off, scratched the hell out of mine installing it.

[starscream5000]

You need some needle nose pliers that are fine tipped and pre bent to get a c-clip installed easily. To further elaborate, you will need to tee in the vacuum into a vacuum line directly BEHIND the throttle body plate. Installe the BOV as close as possible to the throttle body if you can.

[OneJArpus]

get snap ring plipers that should do it

[1jzMoe]

you will want the snap ring the ones with the 90 degree bend at the end, those are the ones you want with the hks bov, i didnt have one with the 90 degree bend and that how i scratched my bov up

[OneJArpus]

^ correct i forgot to add that little bit of info