1jz fpr kit

[1jzMoe]

what is the specs on your afpr kit? Do you sell a fuel rail to work with the kit? And will it work with 850cc injectors? looking to get about 650-750 at the wheels on c16 with high boost. What fuel setup would you guys recommend for that kind of power?

[bigaaron]

The 1jz afpr kit was designed for a stock fuel rail. From what I have heard, the stock side feed fuel rail is good up to 550cc, maybe a little more. Jay has (what tested to be) 624cc injectors in his stock fuel rail, and it seems to be working fine at ~450whp. If you were really to need over 600cc, the fuel rail may cause the injectors near the end of the rail opposite from the feed to be starved for fuel. For your power goals you will probably need an aftermarket fuel rail. I could substitute the correct hose for the new rail and you could still use the same regulator and accessories that come with my kit. I don't have an aftermarket fuel rail available at the moment.

The kit comes with:
Aeromotive 1000-6 regulator
Stainless hardline
Teflon lined braided stainless hoses
Adaptors and fittings
5/16 push-lock fuel hose to factory hardline, with hose clamps
0-100 psi gauge, black on black with yellow lettering
Bracket with screws