View Full Version : Boost
H-Dogg
05-28-2007, 08:45 AM
What is the stock boost on the 1JZ?
BigTree
05-28-2007, 01:26 PM
If you step on it in mid second or third I peak out at 11.8 psi for a few seconds and even out at about 10.0 psi.
rakkasan
05-28-2007, 02:20 PM
Sheesh....SEARCH for this info, it's been documented thousands of times already......
annoyingrob
05-28-2007, 11:34 PM
10 PSI
:)
H-Dogg
05-29-2007, 10:47 AM
If it's 10 PSI, would that mean 5 PSI is being pumped out of each turbo?
conundrum07
05-29-2007, 11:16 AM
No.
OneJoeZee
05-29-2007, 01:08 PM
If it's 10 PSI, would that mean 5 PSI is being pumped out of each turbo?
It doesn't work that way.
JustAnotherVictim
05-29-2007, 01:30 PM
Do leprechauns conjure up the boost?
Big Wang Bandit
05-29-2007, 01:41 PM
Yes,, I have 3 in shackles
annoyingrob
05-29-2007, 10:25 PM
If it's 10 PSI, would that mean 5 PSI is being pumped out of each turbo?
They BOTH produce 10psi, but they only flow half the air at that one turbo would flow at that pressure.
Junior
05-29-2007, 10:39 PM
pressure x volume = flow
flow = power
increasing pressure (boost) will increase flow and therefor power.
Volume is the trapped displacement of the engine, with the level of knowledge you've shown you're at now, don't even begin to consider fucking with that, I'm not meaning to be hard on you, but odds are high that it's beyond you.
annoyingrob
06-01-2007, 07:51 AM
increasing pressure (boost) will increase flow and therefor power.
That's not entirely correct.
While there is an increase in flow within the engine due to the positive manifold pressure pushing a little more air into the cylinders, the majority of the power increase comes from the DENSER air charge. It's all about the number of oxygen molecules per volume of air. :)
If you pushed your turbocharger way beyond its efficiency, even if the boost was higher, the air could be so hot that the density is the same, so increasing boost will not necessarily increase power :)
Damn turbos are so complicated.
masterchief819
06-02-2007, 04:59 PM
10.1526416 pounds per square inch
Powered by vBulletin™ Version 4.0.2 Copyright © 2010 vBulletin Solutions, Inc. All rights reserved.