PDA

View Full Version : BIC mounts


Supracharged88
05-27-2007, 11:06 AM
hey guys i got my bic mounts on but i had to take off the fuel filter and some small support bars. i was wondering if these bars need to go back on and what others have done with the fuel filter in the past?
becauseican
05-27-2007, 01:21 PM
The intake support bars need to be removed when using the mounts, but they are not needed, I have been driving without them for years without any problems. And the fuel line block will also fit with the brackets. Which motor are you using?, supra or soarer?
86_sports_1jz
05-28-2007, 01:45 AM
does it matter if you use a soarer or a supra 1jz when putting it into a supra body w/ your mounts?
Supracharged88
05-28-2007, 12:54 PM
i am pretty sure i am using a supra motor, how do i make sure?
becauseican
05-28-2007, 01:19 PM
The blocks are the same, and the brackets will work on either, just the oilpan/ sump is different and the fuel line block thats on the stock bracket is different.
MA717MGTE
05-28-2007, 05:04 PM
The blocks are the same, and the brackets will work on either, just the oilpan/ sump is different and the fuel line block thats on the stock bracket is different.

any one with a comparison picture?
irocznissan
05-28-2007, 06:00 PM
^^^ yeah.