New Spearco style IC in stock

[bigaaron]

These are going to be $165 right now, I have about 12 available. Depending on how these move, I can increase my stock level for the future.

I like the end tank design on this one a lot, it's very smooth and allows more airflow to move all the way to the end opposite the inlet/outlet. This one is about 1" longer then the origional Spearco replica. This is a 3" core, but should still be able to handle 400+whp. The origional flows about 700cfm, so this one would be good for probably 550cfm, which would work out to somewhere around 550 crank hp.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0701Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0701Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0700Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0700Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0699Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0699Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0698Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0698Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0697Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0697Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0695Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0695Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0692Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0692Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0691Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0691Large.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_SANY0703Large.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0703Large.jpg)

[starscream5000]

I'm guessing your supliers discontinued the bigger spearco style right? I can't find it anywheres now, just the regular sized spearco style.

[bigaaron]

Yes, I will not be able to get those again. This one is only a few inches shorter, and has better endtanks.

[starscream5000]

What's the core size on the smaller one Aaron? About 19.5"X6"X3"?

Is the spearco style's core something like 18.5"X6"X3.5"?

[JustAnotherVictim]

Looks great but I was curious about the differences as well. Other than cfm flow.

[bigaaron]

This one is about an inch longer, and has a 3" core.

[JustAnotherVictim]

Yea read that. ;)
Is the other a 4" core?
I looked at your site and it doesn't say.

[bigaaron]

The spearco replica is a 3.5" core.