cheapest 2jz

[turbotrev]

hey ppl im looking to get a front clip or just an engine and tranny. where is the cheapest and more reliable place to get one????

i have searched for some and found a few at like Osaka and a few other places off of yahoo.

any info would be good

thanks

trev

[OneJSupra]

why go cheap ? find a reputable importer (Jarco, JHOT, DM)... and go for a front clip. You'll never have to source any parts whatsoever since everything is included. Trust me... you won't regret it. It will be expensive though but in the end it pays off.

[turbotrev]

im not going for CHEAP im going for less money but still a reputable importer like which one will be more trusting for less bucks

[crazysupra2JZ]

japaneseengineimport on ebay seems pretty good. i bought mine from them for $2100 and shipping was free. they called me not even an hour after i had won the engine. i received it early the next week. came with complete engine harness, ecu and auto tranny

[GotTurbos?]

For the record, I got mine from Osaka and it was unbelievably clean, everything looked perfect, and the compression was 100% to spec. I would go with them if again if I needed to. Plus, 1750 shipped for a full 2j wasnt a bad price.

[foreverpsycotic]

quick question gotturbos, did it come with a fan? that is a realy killer price for what you get.

[angrydrone]

quick question gotturbos, did it come with a fan? that is a realy killer price for what you get.

No it did not.

[turbotrev]

so it was just 1750 for the motor tranny and ecu. what else did you have to get to swap it over?


edit: i just looked on osaka and WTF a 2jz w/ 6spd 5500 and a 2jz w/ auto only 1700!!!!! :0 whats the model code for the 6spd is it T56???

[Jaguar]

Link to Osaka?

[The Amazing Spider-Man]

Link to Osaka?
http://www.osakajdmmotors.com/

I went here www.jrautoparts.com

[The Reaper]

the 6speed is a GETRAG German made tranny and its the v160 not t56...t56 is more domestic....camaros, T/As and even Aston Martin from what i hear.

v160 6speed supra trans is like 2500 bucks by it self man

[turbotrev]

WHAT THE DEUCE!!! i might just stick to the r154 for that kind of money i could get a nice suspension setup lol

[kikwear002]

For the record, I got mine from Osaka and it was unbelievably clean, everything looked perfect, and the compression was 100% to spec. I would go with them if again if I needed to. Plus, 1750 shipped for a full 2j wasnt a bad price.
I ordered 3 1jz's from them, everyone had something wrong with it, cut harness, chaser engine, soarer.

They are very quick to tell you they have something and then send something else. After you pay them they give a shit about you. I had john calling me 30 tiems one day about how he was going to kill me because i refused an engine he messed up and snet me when i didn't order.

I would spend the extra and get one from jhot or jarco.

[SupraStardom]

I ordered a honda b18c engine from osaka a long time ago and it was fine except for one syncho for the lsd tranny was bad.

[SupraMario]

I would buy from a place near you.
I'll be buying from Jarco, they have a place in GA, and thats a few hour drive, and I can "talk" with them if need be.

[turbotrev]

does any one know where is the closest place to Phoenix, AZ to get a 2jz?????

[crazysupra2JZ]

get ahold of japaneseengineimport on ebay. shipping is free. the price of the engine is around $2100. the harness was uncut and they called me right away.

[devilpup]

I was looking at this engine, JDM Engine Corp. (http://www.jdmenginescorp.com/index.php?main_page=product_info&products_id=145)
It seems like a really good deal, seeing all that it comes with. I just wanted to know if any of you knew of this company, and if I can trust them. I just thought that $4k for the engine, tranny, turbo, and all the other parts seemed a little cheaper than I expected. Thanks.

[p5150]

Or you could just go 2jzge -> T if you plan on going big single. Stock twins suck anyway.

[turbotrev]

im planning on just making an autocross style racer so reliability is my goal not big numbers.