PDA

View Full Version : please make!!!

Koenigturbo
05-02-2007, 12:30 PM
Aaron/ Jose please make me/ us a 3000 intake pipe like the H.K.S. type,... but it has to say 3000 on it,.....please,...please......thanks,....thanks,......THANKS!!!
MA717MGTE
05-03-2007, 01:17 AM
i wanna know why?
JASONA70
05-03-2007, 04:27 AM
~.~ pm or call them??
johnathan1
05-03-2007, 04:31 AM
You could just put in a piece of 2.5 inch piping, and write "3000" on it with a Sharpie. :)
suprahero
05-03-2007, 06:59 AM
You could just put in a piece of 2.5 inch piping, and write "3000" on it with a Sharpie. :)

Problem solved....................Next!
Koenigturbo
05-04-2007, 07:57 PM
I've already done that it doesn't look as good beside when I wash the engine compartment it washes away


You could just put in a piece of 2.5 inch piping, and write "3000" on it with a Sharpie. :)
Koenigturbo
05-04-2007, 07:58 PM
because

i wanna know why?
Wills7MGTE
05-04-2007, 11:43 PM
Buy a 2JZ it's even more bling bling it syas 3000 twin turbo right on the spark plug galley cover, WOO HOOO.
CF_Sapper
05-05-2007, 12:01 AM
acid etch it shouldn't be that hard my mom did that to some mirrors.
Zach
05-05-2007, 01:17 AM
Aaron/ Jose please make me/ us a 3000 intake pipe like the H.K.S. type,... but it has to say 3000 on it,.....please,...please......thanks,....thanks,......THANKS!!!


Obviously you represent a large and lucrative market for HKS-style crossover pipes.................

One thing nobody wants to learn about the Mk3 community or any car community, is that if you want something specific, chances are that there's not a huge market for it, so just buckle down and spend the extra few bucks to make it yourself

Get yourself an HKS 3000 pipe (about 100 bucks brand new), have the HKS lettering milled off, then CNC or paint or whatever the 3000 into the placard that's left.

Heaven knows that if somebody actually DID make it, you'd whine because it cost $49 and you can find it cheaper on eBay.....
bigaaron
05-05-2007, 03:05 AM
I already made one, and you can too! If you cut off the end right after the fitting for the stock bov, it becomes 2.5" to 2.75" through the stock 3k pipe. It has a little bit of a flat spot on the bottom, but it is thick enough that you can grind it and make it completely round.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/3kpipeto2.jpg
spinningheadboy
05-23-2007, 02:15 AM
Perhaps like mine?

http://myweb.cableone.net/cwd100/3001.jpg
http://myweb.cableone.net/cwd100/3002.jpg

:)
Chris D.
Boise