bigaaron
04-19-2007, 02:11 AM
We've had several people show interest in a hose to bypass the 7M-GTE fuel pulsation dampener. We have several engines in the shop and I was looking at the stock setup today. I think there are some hoses being made already to go from rail to the banjo fitting on the banjo coupler bolted by the engine mount bracket. I really don't see any use for that coupler other then so Toyota could use the same hose for several different engines :dunno:
So what we are going to do is to make our hose go from the fuel rail directly to the pipe fitting coming from the tank. If the fittings are not too expensive, the hose would be about $70 using Teflon lined braided stainless hose with crimped -6 AN fittings, and if you bought the hose with our afpr kit we would offer a discount. I should have more definite info and pricing by Friday.
So what we are going to do is to make our hose go from the fuel rail directly to the pipe fitting coming from the tank. If the fittings are not too expensive, the hose would be about $70 using Teflon lined braided stainless hose with crimped -6 AN fittings, and if you bought the hose with our afpr kit we would offer a discount. I should have more definite info and pricing by Friday.