Stinger Q's

[boostadikt]

so i know i can prolly find most answers by reading, but i choose to annoy you.

There is no pre89 harness in the works right? so do you sell it with a flying lead.
you also were running it with the stock cps, is that stock ignitor and coils as well? What if i wanted to run COP's?

Can i datalog with my Lm-1 wideband or do i have to use the stinger's?
so lastly Its listed for 850$ what all does that come with, any sensors? Can it use Gm sensors for MAP and IAT?

im considering this or a haltech, but am very interested

[bigaaron]

I am not going to be making a pre 89 harness. The Stinger for $850 comes with a unterminated harness with about 5' long wires, a serial cable to hook up to your laptop, and the software on a cd. It will use stock coolant and or air temp sensors, it will work with the stock cps, it will work with the stock ignitor, you can use a GM air temp sensor if you want, and it has the calibration file included for it. It's a great unit for the money.

[boostadikt]

yeah i am really leaning towards it, but what about coil on plugs, Gm MAP sensor? and does it have wideband input?

[bigaaron]

It has a 3 bar map sensor built in, it can handle up to 30 psi. It does not require a GM map sensor, it has no input for an external map sensor.
It will work with a stock ignitor or an aftermarket ignitor. The 7m ignitor will run the is300 coils, but not 6 1jz coils, you would need 2 ignitors in that case.
The website for it is www.enginemanagement.com.au
You can download the software, and install it on your pc and see how you like it. It has extensive help files and schematics included with the software.


Here are some threads with lots of info:
http://www.supramania.com/forums/showthread.php?t=36287
http://www.supramania.com/forums/showthread.php?t=35997
http://www.supramania.com/forums/showthread.php?t=40070&highlight=stinger
http://www.supramania.com/forums/showthread.php?t=37392&highlight=stinger
http://www.supramania.com/forums/showthread.php?t=34727&highlight=stinger

[WeDgE]

Not sure if this has been covered, but is the AEM UEGO WBO2 compatible with the Stinger (via the output signal from the controller)?

[bigaaron]

The innovate lm-1 and lc-1 work with it for sure, any you can calibrate it for other brands but I'm not sure how accuarte it will be.