Getting new intercooler pipes, how much pipe?

[loki2043]

okay so i got some cash to get some pipes for my rig now and i was looking at this kit on ebay, each pipe is rolled and nice looking couplers w/ tbolt clamps.

http://cgi.ebay.com/ebaymotors/2-5-INTERCOOLER-PIPING-KIT-SUPRA-M-III-7MGTE-7M-GTE_W0QQitemZ190094433269QQcategoryZ33601QQrdZ1QQcmdZViewItem

does this kit have enough pipe for my setup? i will be running the stock intercooler, sometime soon i will be getting the spearco intercooler also.

each extra piece of pipe is 13 bucks


let me know! thanks

[supramike7m]

i did the same thing. two sets should be plenty. unless you mess up on cutting them. its a very cheap way to do this and works just as good as brand names.

[loki2043]

2 kits? i was looking for more of a how many of this pipe and that pipe type of answer lol.

[futeki_supra]

you should find the ebay kits that include U bends.

then it should be enough

[suprahero]

...........or, get the kit that www.driftmotion.com offers. It is $160.00 I think, but it has everything you need. It has silicone couplings, tbolt clamps, and aluminum piping. I have bought two kits from him and they work perfectly. One kit will do what you need and you'll have pipe left over. Good luck.

Here it is here....http://store.driftmotion.com/productdetails.php?sid=146071608f0538&product_id_int=301

[Aspec]

okay so i got some cash to get some pipes for my rig now and i was looking at this kit on ebay, each pipe is rolled and nice looking couplers w/ tbolt clamps.

http://cgi.ebay.com/ebaymotors/2-5-INTERCOOLER-PIPING-KIT-SUPRA-M-III-7MGTE-7M-GTE_W0QQitemZ190094433269QQcategoryZ33601QQrdZ1QQcmdZViewItem

does this kit have enough pipe for my setup? i will be running the stock intercooler, sometime soon i will be getting the spearco intercooler also.

each extra piece of pipe is 13 bucks


let me know! thanks



It's more than enough pipe if you are going through the stock air filter snorkel hole next to the radiator. However, if you want to use the kit with your future IC you will need two 90 deg silicone connectors, one 2.5" to 2.75" reducer, one 2.5" to 2" reducer, some sort of t-fitting for a bypass valve, 20 t-bolt clamps including one 2-2.25" and one 2.75".

14251

14252


2 kits? i was looking for more of a how many of this pipe and that pipe type of answer lol.

Two 45's for the lower pipe. Two 90's, two 75's, one bypass/bov tee and one straight.