New dyno numbers!

[upgradedsupra]

http://www.supraforums.com/forum/showthread.php?t=411827&page=5



Now I need a real clutch. Since the clutched slipped at this hp level, I now need a new and better one. This was a boost only run. This would have been much more if it held np! Nitrous was next on tap but since the clutch didn't hold on just boost, I see no point in doing this on nitrous (yet) :( Maybe in a few weeks...

Duane

[IJ.]

Well done Duane!

Nice fat curve there.

[supra90turbo]

that's awesome, Duane!
Congrats. You and Nate should go run some 15 sec 1/4mi times now, k? ;)

[Doward]

Seriously fat curve there... must be a BLAST on the street!

[Justin]

That is awesome man! I sure hope you manage to bring it to the big ole meet this year, I am really anxious to see it!!!

[OneJoeZee]

ya that graph looks pretty nice.

[upgradedsupra]

Thanks guys :)Yup...it is good power but would have been over 800 if the clutch held up. I am happy still though :D The nitrous will be next once I get the clutch.

Duane

Haven't had it on the street yet because it is 6 hours away from me at RREV Motorsports :)

[Mr.PFloyd]

damn very nice!

[OneJoeZee]

Tryin to break 1k with spray?

[IJ.]

Duane: What clutch is in it?

[x87SUPRA87x]

Congrats Duane! :icon_bigg lookin good

[Brewster]

My 1J makes more torque at 3500rpm. ;)

Those are some seriously good numbers man!

[upgradedsupra]

Tryin to break 1k with spray?

If I get a clutch to hold then yes.

Duane

[upgradedsupra]

Duane: What clutch is in it?

6 puck single disk ( it hell last year with 651 TQ with my old turbo combo) so I figured this would hold the new set-up. The TQ we figure would be in the high 6's if he held for us and over 800:naughty:

I spoke with RPS and they told me that they might make a clutch (tester) and I am waiting a reply back still.

Duane

[IJ.]

Duane: Psychic prediction> I see a multiplate in your future!! ;)

[upgradedsupra]

Duane: Psychic prediction> I see a multiplate in your future!! ;)

Yes you do..it is in the plan eventually

Duane

[OneJoeZee]

twin or triple?

[IJ.]

LOL can't see a single hooking that up and still being drivable without steroids ;)

[upgradedsupra]

twin or triple?

Eventually I am going for a Tilton but will see what happens for the temp solution.

Duane

[OneJoeZee]

Cool beans, Duane. All 7M and 1J jokes aside, it looks like your new setup coupled with the motec management is a great success.

[upgradedsupra]

Cool beans, Duane. All 7M and 1J jokes aside, it looks like your new setup coupled with the motec management is a great success.

Thanks very much :) I have to say that I am very happy right now :D

Duane

[Dirgle]

Great work Duane! You're proving that the 7M deserves to be in the same performance arena as the 2J. Very impressive.

[Tun_x]

Nice work Duane!!


Jason

[Imprezademics]

Holy poop! I thought my bosses MK4 had some serious power (~610RWHP) Im glad to see a 7m with that kind of power... those are just ridiculous numbers. Good job man! Now we need a vid with some cool techno music and funny pics. lol!

Willie

[IJ.]

Ridiculous even ;)

[Doward]

What turbo you got this all on?

[upgradedsupra]

What turbo you got this all on?

I run a T88-34D from GReddy :)

Duane

[OneJoeZee]

:0! and people say T88 is an "obsolete technology" turbo

[swaq]

I'm impressed!

[Doward]

You got a T88 to spool like that??

I'm impressed!

[Tire Shredder]

holy christ that is insane. congratulations.

breaking barriers is what you're doing. You should be very proud.

the block design is quite old. This is amazing proof of toyota's engineering to achieve such incredible results with an "old" 3 litre motor. Shows what you can do with some knowledge, skill, patience and a bit of money.

It's truely amazing you can make a graph like that and the car still looks good!

again, congrats!

[kwnate]

I can't believe how well it did, alot more then we thought! Congrats and good luck hooking up in 1st, 2nd, 3rd and 4th :biglaugh:

[Nick M]

That is fantasitic. You're achievement is an inspiration to me. I vote for THM400.

[MattOneDizzle]

Being the only one here that was present for the dyno pulls today, all I can say is..

HOLY CRAP THIS CAR SOUNDS AWESOME! And makes some HUGE HP's!

I will post video tomorrow so everyone can see.

Huge congrats to Duane and Ron for putting together such a great engine. As you may know we (RRev Motorsports) are the ones who did the MoTeC install/wiring and John Reed (our tuner) was behind all the wiring and the keys of the Motec software. Everyone here at the shop is just plain impressed with the performance the car put down on the dyno today, and we give Duane a very hard time about 7M's!! hahaha..

You may not know me, but for those who do.. I am officially giving Duanes car the following status:
http://www.rrevstore.com/6.gif

Congrats man!

[IJ.]

Matt: ARGHHHHHH you tease post it now!! ;)

[upgradedsupra]

Thanks everyone for all your compliments! Very special thanks to Ron, Nate and Tom (helping me put the car together), but especially Ron! Special thanks to the RRev crew - John Reed, Matt, Brian and Tim for their expertise and the fantastic job they did!

Duane

[JustAnotherVictim]

Psssh put in a 1j and you can make 1000hp. ;)

Impressive to say the least Duane. :D

[tte]

Nice job Duane..

And maybe Duane should let people know that he is running stock oil pump with stiffer spring and no other mods on it. Says alot bout the stock pump and the stock tubing that goes with it...that many people want to change.

Cheers,
Roy

[jt2ma71]

You're welcome Duane. We knew that turbo will spool like that. And that's not even a BB. Long runner header FTW!!!:biglaugh: So, we going this weekend? Can't wait to hear that thing under boost!

[tissimo]

very nice!

a/fs look very aggressive..

[X-man]

Congrats Duane! You and Ron did a great job on everything. To everyone else who had a part in it great job as well.

Sean

[VanSupra]

Good work to all of you. Great number too. Just curious but how much did all of this cost?

:)

[Sl1dewaysSupra]

Amazing, just plain amazing... Great job!!!

[6o4turbo]

Can't wait to see this on the track, you going to run this year Duane?

[boostadikt]

Damn! very nice....... Did you Video It?

Ha i am hitting the dyno on Saturday..... and now feel mediocre....... You suck.

[GrimJack]

Congratulations, I know it's been a long road. When people start giving my car the hairy eyeball at meets, it's been too long since Duane was there. Or Don. Or Jeremy. Or Randy. Or... damn it! ;)

[gixxer750]

Weak































































Just kidding, awesome numbers man.

[drjonez]

...I spoke with RPS and they told me that they might make a clutch (tester) and I am waiting a reply back still.

Duane

eh, good luck w/that....

amazing numbers, congrats man!

[Tanya]

Ridiculous even ;)


warning * aussie spell check in progress


Congrats Duane! Almost time to release those shirts? ;)

[TobyCat]

amazing! but, where's the video? =D

[Loki]

Amazing Duane, can't wait to see the video.

[upgradedsupra]

You're welcome Duane. We knew that turbo will spool like that. And that's not even a BB. Long runner header FTW!!!:biglaugh: So, we going this weekend? Can't wait to hear that thing under boost!

HA HA ...Yup Ron we thought it would spool like this :biglaugh:

I will run the car but need a clutch first.

Doc: RPS has been good to me but will see. Either way Tilton is my next biggest clutch anyway. I just need something to do me for now.
Don:Cost? It was cheap ;)
Tanya..If clutch held yes it would.
Thanks for the comments guys I am happy as a pig in mud :D and no nitrous yet either! :evil2: Video is going to be posted tomorrow!

Duane

[Nick M]

I have read some comments from good people that you can't go past 600 rwhp on the 7M head with out nitrous. While I agree that it isn't a bolt on affair, this shows how just how good the head can be.

[LilMissMkIII]

Damn nice stuff!!!!!

[MRSUPRA]

Nice job again.. If its not to much trouble, could you post your mod list?

[supra90turbo]

/\ I don't know that he's got an hour to spare ;)

[X-man]

I have read some comments from good people that you can't go past 600 rwhp on the 7M head with out nitrous. While I agree that it isn't a bolt on affair, this shows how just how good the head can be.


Funny, I was having this conversation with someone last night. Again, good job Duane.
Sean

[BRIAN]

Nice work!


-Brian

[jt2ma71]

HA HA ...Yup Ron we thought it would spool like this :biglaugh:

I will run the car but need a clutch first.

Doc: RPS has been good to me but will see. Either way Tilton is my next biggest clutch anyway. I just need something to do me for now.
Don:Cost? It was cheap ;)
Tanya..If clutch held yes it would.
Thanks for the comments guys I am as a fly on cow shit :D and no nitrous yet either! :evil2: Video is going to be posted tomorrow!

Duane

Skip the rps, you know you will end up trashing it too resulting in more work/downtime. Jump right up to the triple tilton or better yet quadruple. Was I ever wrong??? :stickpoke Huh???? lol! now head over here so we can cruise in the IS to visit that beast....

[MassSupra89]

Amazing. Can't wait for video's.

[MattOneDizzle]

Tilton FTW

Oh yea.. heres some video of it on the dyno yesterday..

http://www.RRevStore.com/onedime/Duane.wmv

:icon_bigg

[tissimo]

lol @ the vid

maybe open the garage door?

[2543arvin]

impressive numbers!:aigo:

[Justin727]

Very Very IMPRESSIVE my friend! Glad to see it pump out big numbers, Can't wait to see it break 800 with the ease of a new clutch heck im sure you'll knock out the 1000hp mark!

[figgie]

See duane told ya about Doc ;)

take what RPS says with a .00001 grain of salt, but you have advantage over most of us, no not money! Magazine Coverage! RPS could give two flying fucks about $ as I have my incident with them to show and you know my feeling on them.

[Brewster]

Tilton FTW

Oh yea.. heres some video of it on the dyno yesterday..

http://www.RRevStore.com/onedime/Duane.wmv

:icon_bigg

hot sexual

[MattOneDizzle]

lol @ the vid

maybe open the garage door?

When you dyno cars like Duanes, and like this.. http://www.rrevstore.com/onedime/duck.wmv the neighbors tend to get a little upset over the noise. Plus our building is equipped with a HVAC system that can handle it. :icon_bigg

I have some more clips of Duanes car, but I'll save those for our next year end video.. Word on the street is we will have two more of the top three MK3's in the NW on the dyno very soon as well.

[IJ.]

Nice clean crisp sounding pull!

The Stang wasn't playing around :)

Matt: Thanks for the vid!
(you need to buy a good camera light)

[LilMissMkIII]

Yay for the vid!!!! Awesome!!!!

[knight202]

lets hope it makes it over the 1000mark! good job duane

[suprahooked]

Duane all i can say is that is simply Fucking amazing.:naughty: :naughty: :naughty: :naughty:

[suprarich]

Love it! Now bring that thing to the Vegas meet!

[Supraholics]

Just WOW. Great to see represent 7Ms this way. Really crazy!!!! Do you think you'll be able to increase the RPM line???

[tookwik4u89]

I expected no less from you, nice work D!

[Figit090]

OH



MY



GOD


i was waiting for this. i love your car and this only makes me more amazed. what were your previous numbers? i have a strong feeling this warrants another go in SCC or similar tuner mag...

hear from any yet? or do you have to contact them...

i vaguely remember reading in your article you wanted to go for 1000 i think... i have the mag in a box somewhere...i'll have to check it out now. lol!

i'm waiting for the video to download, and it sucks.

so how do you know the clutch is slipping? dissproportionate RPM curves at the wheels as compared to the engine? or do you hear it...

[GrimJack]

Nice job again.. If its not to much trouble, could you post your mod list?That's pretty easy.... start with an '89 Supra Hardtop.

Pull everything out / off of it.

Throw most of that out.

Upgrade everything that's left.

Buy new / improved versions of everything you threw out. (Anyone feel like explaining the difference between a CT-26 and a T-88?)

Put it all back together.

Add a rollcage and turn up the boost.

Honest - I'm not kidding, the number of parts that he has on there from the original car isn't large, and virtually everything has been upgraded, at least once, in some way.

[cnewingham]

SPEECHLESS

[JENNY!]

im gunna drive your car, right?

[upgradedsupra]

That's pretty easy.... start with an '89 Supra Hardtop.

Pull everything out / off of it.

Throw most of that out.

Upgrade everything that's left.

Buy new / improved versions of everything you threw out. (Anyone feel like explaining the difference between a CT-26 and a T-88?)

Put it all back together.

Add a rollcage and turn up the boost.

Honest - I'm not kidding, the number of parts that he has on there from the original car isn't large, and virtually everything has been upgraded, at least once, in some way.

LOL..Yup that pretty much explains it :biglaugh:

Thanks guys for the comments :) The plan is to get another clutch then break past my 800 (which will be np) then add a 150 shot of juice :biglaugh:

i vaguely remember reading in your article you wanted to go for 1000 i think... i have the mag in a box somewhere...i'll have to check it out now. lol!

Yes it is the plan

so how do you know the clutch is slipping? dissproportionate RPM curves at the wheels as compared to the engine? or do you hear it...

It is both. You can see in it the graph and you can hear it on the dyno. (just not on the video)


Duane

[Doward]

Buy new / improved versions of everything you threw out. (Anyone feel like explaining the difference between a CT-26 and a T-88?)


Sure, I'll do that for you.

A T88 devours children, cars, fuel, and money when it spools. A CT26 just manages to pull in some air. :D

[pimptrizkit]

lol neibor hood cats go missing!

[NashMan]

that thing needs no2 and more turq lower witch the no2 will give

then 2 steel drum sized tires to put the power to the ground

[upgradedsupra]

that thing needs no2 and more turq lower witch the no2 will give

then 2 steel drum sized tires to put the power to the ground

Don't worry Nash...it will all come in due time. Nitrous is on the menu :D

Duane

[tookwik4u89]

Power whore;) Can't wait to see some 10's!

[upgradedsupra]

Power whore;) Can't wait to see some 10's!

LOL I can't either

[swaq]

9's?

[upgradedsupra]

9's?

That is the plan :biglaugh: but will need to get this clutch thing figured out first.

[SlowSupra]

Duane, to put it simplly THAT IS SICK!!!!

[MKIII VIXEN]

Wow...............just.............Wow! That is incredible! Congratulations!

[Reign_Maker]

Very nice Big D... Glad to hear it... You've always been an inspiration to me... Cant wait to see what she does with a holding clutch...

[suprahero]

Well, I'm actually dissappointed.................I was hoping to see dyno straps breaking like cheap walmart rope, but it never happened...............:nono:







Just kidding. Those are some great numbers Duane, and your car looks better than ever with your new and improved engine bay. I can't wait for you to get it and make some road footage and some track footage. I can't honestly see what you would ever need nitrous for with those numbers there, but maybe your trying to compensate for something else....................torque of course............:biglaugh:

[Tanya]

You are the wind beneath my wings...


http://smiliesftw.com/x/ugh2.gif

[buckshotglass]

:rant2: :rant2: :rant2:

Wow. That makes me crazy. I'm beyond jealous. I give up.

Nice fucking job on that.

[dbsupra90]

congrats man! keep at it!

[MattOneDizzle]

Well, I'm actually dissappointed.................I was hoping to see dyno straps breaking like cheap walmart rope, but it never happened...............:nono:

Funny thing.. Duane called me and asked me to knife up one of the straps so he could break one.. I told him sorry, I will not sabotage my employers equipment. :3d_frown:

[MassSupra89]

I'll be expecting all the light tools and equipment, and possibly an underweight standerby to be sucked into the turbo in the next video.

[upgradedsupra]

Funny thing.. Duane called me and asked me to knife up one of the straps so he could break one.. I told him sorry, I will not sabotage my employers equipment. :3d_frown:

hahahah Matt. Send me the other video via email. I loved this one especially the song :)

Duane

[suprahero]

Funny thing.. Duane called me and asked me to knife up one of the straps so he could break one.. I told him sorry, I will not sabotage my employers equipment. :3d_frown:

You know if Nate broke one strap, then Duane was shooting for at least two..............:biglaugh:

More videos please. MKIII pRon FTW!!!!!!!

[Reign_Maker]

http://smiliesftw.com/x/ugh2.gif
*violins*

[Figit090]

Well, I'm actually dissappointed.................I was hoping to see dyno straps breaking like cheap walmart rope, but it never happened...............:nono:



that happened to him once didnt it? does anyone have a video of it? id like to see it.

[upgradedsupra]

that happened to him once didnt it? does anyone have a video of it? id like to see it.

That was on Nate's Supra.

Duane

[tookwik4u89]

that happened to him once didnt it? does anyone have a video of it? id like to see it.
That was his slow purple buddy that used to have more HP than Duane.......wont say any names ....ahemmmm....roty

[Figit090]

That was on Nate's Supra.

Duane

oh yeah...oops. sry. is there a video in existance? i'll search i guess.. lol

[upgradedsupra]

oh yeah...oops. sry. is there a video in existance? i'll search i guess.. lol

yes just asked him. His name is KWNATE on the board.

Duane

[suprarich]

Hey Duane,

Can I be the first to call you out for a match race at the vegas meet?

[jg_xsboost]

Suprarich,

What kind of power will the built A340 you're selling hold? What kind of HP were you making with the 89 and the stock turbo? Lightened supra? Nitrous?

Im waffling between a built a340 and a TH400 or just replacing my clutch.

Thanks,
JG

[upgradedsupra]

Hey Duane,

Can I be the first to call you out for a match race at the vegas meet?

I don't know? Can you :biglaugh: I need a clutch first to finish making my power. Sure I will race you if I end up going. Not sure the plan just yet.

Duane

[suprarich]

I don't know? Can you :biglaugh: I need a clutch first to finish making my power. Sure I will race you if I end up going. Not sure the plan just yet.

Duane

Well, I just thought that the last time you came state side to race someone, it ended up being a smoke screen for your magazine shoot. Just helping you out brother! If you are in vegas, we can do a friendly match race. Battle of the white 7m's.

[suprarich]

Suprarich,

What kind of power will the built A340 you're selling hold? What kind of HP were you making with the 89 and the stock turbo? Lightened supra? Nitrous?

Im waffling between a built a340 and a TH400 or just replacing my clutch.

Thanks,
JG

PM me, lets not jack Duane's thread

[jg_xsboost]

PM me, lets not jack Duane's thread


Fair enough. PMed.

or jumped to: www.supramania.com/forums/showthread.php?t=35353&page=2

JG

[upgradedsupra]

Well, I just thought that the last time you came state side to race someone, it ended up being a smoke screen for your magazine shoot. Just helping you out brother! If you are in vegas, we can do a friendly match race. Battle of the white 7m's.

Sounds good to me. White 7M powered Supras FTW! :biglaugh:

Duane

[kwnate]

Sounds good to me. 7M powered Supras FTW! :biglaugh:

Duane
Fixed.

[fiyota]

very nice numbers duane... very nice... hopefully I'll get to see it this time at pacNW suprafest!

[NashMan]

get your car runing i wana know if the trannie will fail

that whould suck if you buy this clutch and the tranny chould not take the truq loads

[born2drv]

I need to get a business card from these RREV people, I will definately be looking into their services in the future.

I don't think I'll ever be able to spend as much time on my car and have as perfect a 7M as Duane, but his work is definately an inspiration. I bought the last magazine he was in, looking forward to getting the next one :)

[born2drv]

BTW: So when are you going with an auto tranny? :) Since you had an auto and did the 5spd swap, I'm sure you'll eventually reach some HP limit and will only get quicker by switching back to an auto tranny?

[91T breezen']

BTW: So when are you going with an auto tranny? :) Since you had an auto and did the 5spd swap, I'm sure you'll eventually reach some HP limit and will only get quicker by switching back to an auto tranny?

Hah! don't count on Duane giving up on the venerable R154 anytime soon! He will probably figure out another way to make it hold over 1000rwhp,:aigo: if necessary!:biglaugh: Alot of people throughout the community, although respecting his attention to detail, and admiring his already lofty numbers...have doubted the capability, and reliabilty of the 7M, when being pushed this hard! Not Duane, Ron R., Nate, or Don! Duane has shut the mouths, of many a hater, and backs up every claim he makes!!!::salute:: :boink: If I lived on the other side of the world, and didn't know him from adam, that on trait alone,^ would make me love him!:icon_razz Good work bro! Can't wait to see 900+, and the sub-10 second passes, that we all know are coming soon!
The bar is way up there now!:bowdown: Next up to bat...KWNate! Look for some more big, big numbers, coming from yet, another superbly prepared motor,(by the FAB 3!) led by the incomperable Ron R.!

[Nick M]

http://www.supramania.com/forums/showthread.php?t=33940&highlight=SILV

:stickpoke

[Supraholics]

http://www.supramania.com/forums/showthread.php?t=33940&highlight=SILV

:stickpoke


hahahaha...don't get people started on that thread again. They might close this one too.

I started that thread as a joke because I found it funny, and it turned out to be a mess. People arguing left and right. :nono: :nono:


Duane - Are you going to answer my question about the RPMs?? :nono:

[Dziuggy]

wow good job Duane, i missed everything as i havent been on here for a little while. keep it up and hope to see you soon (or silv at least)

Dziugas

[Reign_Maker]

that whould suck if you buy this clutch and the tranny chould not take the truq loadsThat would suck... :icon_evil
I need to get a business card from these RREV people, I will definately be looking into their services in the future. :)http://www.supramania.com/forums/showthread.php?t=40860
Not Duane, Ron R., Nate, Don or JAKE!......... Next up to bat...Reign_Maker!!Fix'd that for ya... ;)

[MattOneDizzle]

Hey Duane..

Just thought I would add..

Uncorrected your car made 803 whp! :evil2: FTW!

[upgradedsupra]

Hey Duane..

Just thought I would add..

Uncorrected your car made 803 whp! :evil2: FTW!
I always go with the uncorrected version. So it is 803!

Duane :biglaugh:

[suprahero]

803? Hell that's no where near enough horsepower. I would definately add some nitrous to your car................:rolleyes:





:biglaugh:

[CTsupra]

HOLY BALLSACKS! How did I miss this thread? Congrats dude!

[Reign_Maker]

Duane, did you make EIGHT HUNDRED THREE horse power on the stock fuel rail? Did you modify the fuel rail for a larger feed or return or anything?

[upgradedsupra]

Duane, did you make EIGHT HUNDRED THREE horse power on the stock fuel rail? Did you modify the fuel rail for a larger feed or return or anything?

This is actually one oif the few stock parts left on my car :)Stock fuel rail with -8 feed and -6 return.

I will post some new numbers soon ;)

Duane

[suprarich]

7m fuel rail flows really well..BTW did you dual feed and return from the cold start? or still single feed?

[John Reed]

How much power again Duane? I can't seem to find the number ANYWHERE on the forums. :biglaugh: :biglaugh: :biglaugh:

[Reign_Maker]

This is actually one oif the few stock parts left on my car :)Stock fuel rail with -8 feed and -6 return.

Duane
I LOVE YOU! :love: :love: :love: hahaha!

I was thinking I would have to mod my rail and do all this stuff, and then I thought, I think D has a stock rail... Thank you for this shit Duane, its so nice to have someone pioneering and PROVING what this motor can do... 800+RWHP on a STOCK fuel rail... Friggin awesome!

[suprahero]

^^^^^Please aim that in another direction. I'm just here for the dyno videos........:biglaugh:

.......waiting patiently for new videos of this slow ass, non nitroused car........:evil2:

[upgradedsupra]

7m fuel rail flows really well..BTW did you dual feed and return from the cold start? or still single feed?

It is a single feed from the back -8 and the front is a -6 bango (see next pic)

http://i133.photobucket.com/albums/q56/upgradedsupra/IM003204.jpg

Best I can come up with as far as the front is concerned. Sorry. You can sort of see the bango there.
http://i133.photobucket.com/albums/q56/upgradedsupra/IM003116-1.jpg
How much power again Duane? I can't seem to find the number ANYWHERE on the forums. :biglaugh: :biglaugh: :biglaugh:

You have the number John ...smart ass.

Edit: I just got that hahahaha

I LOVE YOU! :love: :love: :love: hahaha!

I was thinking I would have to mod my rail and do all this stuff, and then I thought, I think D has a stock rail... Thank you for this shit Duane, its so nice to have someone pioneering and PROVING what this motor can do... 800+RWHP on a STOCK fuel rail... Friggin awesome!

Yes Jake it is stock FTW! :biglaugh:

^^^^^Please aim that in another direction. I'm just here for the dyno videos........:biglaugh:

.......waiting patiently for new videos of this slow ass, non nitroused car........:evil2:

We will have another video up very soon :naughty: Stay tuned! I may just rename this thread later.

Duane

[LilMissMkIII]

new vid now damnit!!!!! :icon_razz

[upgradedsupra]

new vid now damnit!!!!! :icon_razz

Big good now :biglaugh:

[boostadikt]

wow.... how big are your injectors.... i knew the stock rail was great... but not that great, i welded a -8 horizontally in the back and -6 in the front.

Anyone drill out their rails? I was gonna try.

[upgradedsupra]

wow.... how big are your injectors.... i knew the stock rail was great... but not that great, i welded a -8 horizontally in the back and -6 in the front.

Anyone drill out their rails? I was gonna try.

RC 1000cc

[Reign_Maker]

Welded in AN fittings? Holy crap, thats commitment... ;)

RC1000s here too... I wanna be like Duane... :D:D:D

[teamslow]

what was the point of this thread? Where are the new dyno numbers?

[kwnate]

what was the point of this thread? Where are the new dyno numbers?

This is almost two years old, wtf are you doing. Duane is old news these days.

[teamslow]

This is almost two years old, wtf are you doing. Duane is old news these days.

I was just curious what that monster turbo he has is putting down. It's been two years and no dyno numbers.

[Justin]

This is almost two years old, wtf are you doing. Duane is old news these days.

Didn't he end up going with a 1J?


















































:sarcasm:

[americanjebus]

Why the hell was this dead thread resurected.

Everyone knows Duane retired and parted out his car to buy a Cadillac DeVille that he can drive 10 mph under the limit with his blinker on.

[CTsupra]

Yay!

[hottscennessey]

I heard he got really into rave's and this is his new engine bay

http://www.clickdesign.co.uk/supradupra/assets/images/supra_cam_3_031.jpg

[figgie]

Since duane has not chimed in and a dig up for no reason.

Thread is closed.

Duane, if you want you can re-open or create a new one.

[upgradedsupra]

Since duane has not chimed in and a dig up for no reason.

Thread is closed.

Duane, if you want you can re-open or create a new one.

Nah, I'll leave it closed. I will update my new numbers when I'm ready. I have dynoed the car and it wasn't on kill so I didn't post a number. :biglaugh: I have a different turbo now anyway. Haven't you learned anything yet?! I like changing things. :D

I now have a 1JZ with a big single. It has cams and a few other things too.

Later!
Duane

[IJ.]

Didn't he end up going with a 1J?


:sarcasm:

If it had a Jz it would still be running :D
(ducks and covers)