Customer feedback/ parts reviews

[becauseican]

Here is a new section for my customers to leave there feedback about BIC parts and service. Feel free to leave your part reviews too.

[pb92supraturbo]

BIC performance makes high quality parts that both fit and perform! Not always true from a lot of aftermarket manufacturers. I have the following BIC products: rerouted downpipe, test pipe, swaybar endlinks front & rear, and reinforcing tabs for the rear lower control arms. All the products installed with zero problems and function flawlessly, so two thumbs up. Thank you BIC and keep up the great work!

[p5150]

I got a set of the motor mounts for my 2jz swap in the 88 MKIII chassis. Everything bolts up perfect!

[GrimJack]

I've got the DDP, and most of my IC pipes were custom fabbed at BIC. Fantastic work, he gets my $$$ every time.

[whenmunkysfly]

Not really that all impressed to tell you the truth. Kink in the end of the down pipe bugs me we worked it out i desided to keep it but doesn't look like the performace peice it is. I had no idea it was made from mild steel and not stainless. If i could do it again I would have bought the cheap one.looks better and looks like a better peice. I don't mean to say hes a bad guy but my experiance was not the best. I also am missing a few gaskets I would think would come with the pipe.

Summery: Nice guy but product cost too much for what it is.

[Evilempire1.3JZ-GTE]

I bought a set of adapter motor mounts they worked great the first time and fit perfect.

[becauseican]

Not really that all impressed to tell you the truth. Kink in the end of the down pipe bugs me we worked it out i desided to keep it but doesn't look like the performace peice it is. I had no idea it was made from mild steel and not stainless. If i could do it again I would have bought the cheap one.looks better and looks like a better peice. I don't mean to say hes a bad guy but my experiance was not the best. I also am missing a few gaskets I would think would come with the pipe.

Summery: Nice guy but product cost too much for what it is.


That is how I have always built the downpipes, I did it this way to help keep the material and fabrication costs down. The last bend is only a 15-16 degree mitre cut, which wont make any more restriction, but maybe a little turbulance. The losses will be very minimal, if anything at all, I am sure it wouldnt even be 1 hp. The DDP will give you a dyno proven extra 25+ hp over a standard 3" downpipe and even more over a stock downpipe !!

These are hand made north american built parts, not massed produced china parts that may or may not fit.

Included with the downpipes is the lower cat/testpipe gasket and new bolts,nuts and washers. Pmme if anyof these were missing and i will send you another hardware package.


Randy@BIC

[garagefujimoto]

I have always found all BIC products to be more than adequate and Randy is an awesome guy.

[whenmunkysfly]

That is how I have always built the downpipes, I did it this way to help keep the material and fabrication costs down. The last bend is only a 15-16 degree mitre cut, which wont make any more restriction, but maybe a little turbulance. The losses will be very minimal, if anything at all, I am sure it wouldnt even be 1 hp. The DDP will give you a dyno proven extra 25+ hp over a standard 3" downpipe and even more over a stock downpipe !!

These are hand made north american built parts, not massed produced china parts that may or may not fit.

Included with the downpipes is the lower cat/testpipe gasket and new bolts,nuts and washers. Pmme if anyof these were missing and i will send you another hardware package.


Randy@BIC

No I am in no way saying you didn't do you job just personally not happy my self. I understand you don't have a bender to make smooth one piece downpipe. I and not attacking you in anyway. I have installed "two Chinese downpipes" with zero fitment issues, they also came with all gaskets. I just want to let anyone who is new to supras "like I was" know that your product is not going to look that great. I was mislead my everyone on this forum hyping about how yours is the best. yet it doesn't look like it will stand up to the "Chinese downpipe" (though it very well may). again THE WORK THAT WAS DONE WAS GREAT JUST DONT LIKE A FEW THING. I AM VERY PICKY AND LIKE TO MAXIMIZE THE EFFICIENCY OF EVERYTHING. ONE HP OR NOT.

[boosting185]

-still waiting for my ddp..i ordered thru horsepowerfreaks..3 weeks ago..cant wait to put it on.

[shaeff]

i've got the BIC ddp and the solid subrame bushings. i love both. they are incredibly hig quality, (i love randy's welds ;)) and fit perfectly.

screw chinese parts. i'll give my money to randy any day of the week, as i know he's going to give me amazing quality parts in return. :)

-shaeff

[Evilempire1.3JZ-GTE]

Who can compete with china man ? he makes decent parts for less then we could even get the materials alone here in the US.

Doesnt give us the right to complain or hurt this guys buisness. I love what he took the time to help us build and we shouldnt run randy out of town with pitch forks and torches.

He earns his money every penny of it just imagine if he spends hours building our custom parts and maybe only passes 5$/hr onto us for his labor I dont know how much he makes but it can not be that much I apreciate what you do randy to help us with and keep our cars on the road.
Again keep up the good work:drink1:

[tlo86]

received my brackets in and im still ordering more parts :) cant wait to see what else he can come up with!

[1jzMoe]

i got a few parts from randy and loved everyone of them, great quality and fitment. Made the mistake of buying something from someone one week before randy released is version and was very unhappy and will be replacing it with randy's version after i get back from deployment

[88tsupra]

I just bought a original BIC DDP un-rerouted from a friend and man I LOVE THAT THINGS!!!

Awsome work man

[SupraOfDoom]

Top notch stuff. I plan on buying a lot more. Thanks Randy.