Aeromotive AFPR kit for 7MGTE

[blackout_89t]

Hey..

Are you willing to sell the Aeromotive AFPR kit for 7MGTE minus the regulator? I already have the regulator but I am looking for an install kit.

Lines, fittings, guage, bracket, ect.

-6an ?

If so, how much?

Thanks.

[bigaaron]

Yes, we can sell the 7M line kit for $115, including all the fittings and a black on black liquid filled gauge. Everything but the regulator and the bracket for the regulator.

[turbotrev]

you should make that Fuel Pulsation Damper delete line and start selling it with and without the FPR kit?

all you would need is the fitting for the fuel rail, the 90* bend fitting, then about 3ft of -AN line(what ever size you decide), and the fitting that you can clamp on the old fuel line.

just a thought

trev

[bigaaron]

I could make that, but how many people want to eliminate the pulsation dampener?

[turbotrev]

dunno just start up a poll in the general discussion sec. and see if anyone is wanting some thing like that.

[blackout_89t]

I removed my pulsation dampener when I installed a -6an feed line from the tank to rail.


Aaron, how/where do I place the order for the kit minus the regulator?
Thanks.

[bigaaron]

I'll add the kit to the website, that is the best way for us. I'm trying to cut down on the paypal, because it's harder to keep track of who ordered what. People don't put all the info in the paypal like their phone number and what exactly they are paying for.

[suprra_girl]

how about the kit... minus the lines lol how much?

[bigaaron]

The regulator is $140 by itself, the gauge is $18.

[blackout_89t]

Call me blind but I don't see the kit without the regulator on your site.

[bigaaron]

Ok, look again!

My bad :nono:

[agp1183]

i have two questions: will this kit work with 7mge? And do the lines replace the hard line that goes to/from the pulsation dampener?

[bigaaron]

Our hose kit has a line that goes from where the stock regulator was to the new regulator, and from the new regulator down to the return line inder the car.

I don't really see any reason to remove the pulsation dampener, it's there for a reason.

"Pulsation dampeners (accumulators, surge suppressors) are used to control and minimize the pulsations that result from a pressurized system’s stroking action. They increase system efficiency, performance, and pump life; decrease maintenance costs and down-time; and protect pipes, meters, valves and instrumentation from pulsation, vibration, and hydraulic shock."

[agp1183]

I'm not trying to eliminate it, I just need a new fuel line for it. Mine is kinked pretty bad. I'll still probably be picking up a AFPR sooner or later though!

[bigaaron]

Oh, well I have a stock one if that's what you want :biglaugh:
Buy the line kit and I'll give you the stock pipe for free.

[blackout_89t]

Ordered.

Just wanted to let you know that your description for the 7MGTE kit says 1jzgte on it.

Just wanted to clarify that I need the 7m kit.

BTW, the only option i could choose for shipping was UPS, your canadian thread specifies to use USPS. Is this going to effect my order?

[bigaaron]

Boxed up and shipping label printed! :biglaugh:

The price you paid for the shipping was purfect for USPS Global Priority Airmail (4-6 day).

I fixed the type on the discription, thanks for the heads-up!

[blackout_89t]

Thanks!

Definetly the smoothest online transaction I have had by far!

[blackout_89t]

Received!

Thanks!!