How to visually identify r154

[drumminforev]

Im going to pick up a 7mgte that comes with 2 r154's. SO i need to know what i can look at to visually identify that they really are r154 since i have never seen one before.

appreciate it

[supra87t/t4]

look for where the clutch slave cylinder mounts, on the R154 it uses a pull type clutch, so the slave mounts behind the fork, a W58 slave cylinder would mount in front of the fork.

[drumminforev]

okay, when u say behind you mean towards the diff and infront is towards the engine right..what does the mount look like so i know its the right thing

[supra87t/t4]

Here's a W58, see the two bolts where the slave mounts, they are in front of where the clutch fork sticks out.

http://cgi.ebay.com/ebaymotors/Toyota-Supra-Non-Turbo-W58-5-speed-transmission_W0QQcmdZViewItemQQcategoryZ33733QQihZ001QQitemZ110095151686QQrdZ1QQsspagenameZWDVW

Here's an R154, see how the slave mounts into the back of the bellhousing so that it's behind the clutch fork.

http://cgi.ebay.com/ebaymotors/JDM-Toyota-Supra-1JZ-5-SPEED-TT-Transmission_W0QQcmdZViewItemQQcategoryZ33733QQihZ017QQitemZ270092213918QQrdZ1QQsspagenameZWDVW

[SLO-MK3]

Look for the inspections covers/holes in the bellhousing, dead give away;)

[drumminforev]

well i really cant see the two holes on the w58, but theres enough differences that i could tell them apart, cool

[SLO-MK3]

http://i99.photobucket.com/albums/l282/shittytritty/DSC00201-1.jpg

[supra87t/t4]

well i really cant see the two holes on the w58, but theres enough differences that i could tell them apart, cool

I think his point was that there aren't inspection holes in a W58...
or did you mean the two bolts I was talking about in the picture, they are right at the front of the bellhousing.

[starscream5000]

Easily done, just see how much beefier looking the R154 is compared to the w58 ;).