Guaging interest, twin GT28R turbo kit, PICS!!

[becauseican]

Well I am making a custom twin GT28r turbo kit for my 1JZ. I am wondering if anyone else would be interested in a kit, either as a complete kit with manifolds, turbo's, downpipe, oil lines........ Or I could just sell the manifold and you could take care of everything else. The stainless steel manifolds will have a T2 flange, so you can use T25, T28, GT25, GT28R, GT28RS, or any other turbo,s using the T2 flange.

Anybody interested?, I estimate that this kit should be good for 500-600 rwhp with the GT28r turbos, and spool up between 3500-4000 rpm. It wouldnt be done for about a month or two bacause I have to make my kit first and test it out, but I am getting extra flanges made so I can duplicate it.
It is not quite finnished yet, still a bit more polishing to do and a few small things, I should have it running in about 1-2 weeks.

http://bicperformance.com/pics/bic1jztwins/IM000952a%20(Small).JPG

http://bicperformance.com/pics/bic1jztwins/bictwins1%20(Small).JPG

http://bicperformance.com/pics/bic1jztwins/bictwinsenginebay%20(Small).JPG

http://bicperformance.com/pics/bic1jztwins/bictwinspiping%20(Small).JPG

http://bicperformance.com/pics/bic1jztwins/bictwinscloseup%20(Small).JPG

[SupraMario]

umm damn that looks nice, man the 1jz guys should jump on this.

[tsuper92]

when your done if you can post prices of the manifold

[I<3Supras]

Wow that looks super awesome!!!! keep up the good work man

[SupraSpeed]

omg i want!!!!! :love:

[mkiii90t]

Do you have an idea of what you'll be asking for the kit?

[mk3ownZ]

Nice work becauseican, keep us updated on it =]

[Loki]

I have seen this setup and it is a work of art, pics do not do it justice.

[siman]

I just got hard...... :love:

[driftingsteveo]

im in are the pipes equil lenth ...if so send me a price then ill send you the money

[turboman]

so what price range will the manifold be, and the complete kit?

[becauseican]

The pipes are within about 1" in length of each other. I havent figured out a price yet , but I know it will not be cheap, almost every part besides the turbo's is hand made by me, manifolds, downpipes, mid pipe, oil/ water lines, piping. A very rough guess would be $5000-9000, for a full kit. There is a coupple hundred dollars in AN fittings alone!!. I should have mine running today or tomorrow and dynoed this week, before I go down to Portland for the big meet.

[jbsupra89t]

Is that in CDN or USD? Maybe that's a dumb question...

[HKS]

Your setup is badass. No doubt about it. How much for the twin manifolds. Just approximate cost.

[supraturbo1987]

Any news on it running randy?

Trev

[becauseican]

Should be running today!!!

[PHILLYSUPRA]

Seriously Interested. Let Me Know When Your Done And Ill Start Saving Now

[7mgte3sgte]

damn yall lol I want this and i dont even have my 1jz yet i want i want i want lol when you get a price together I would like to know how much so i can open yet another savings account man these cars are just like being married yet i havent borrowed any money to make her happy she is ok on my income right now lol :biglaugh: anyways if its gonna be like 5g's then it will take me like 7 months to put that together but from the pics ive seen my god is it worth it!!!!!!!!!!

[SupraRacer]

The pipes are within about 1" in length of each other. I havent figured out a price yet , but I know it will not be cheap, almost every part besides the turbo's is hand made by me, manifolds, downpipes, mid pipe, oil/ water lines, piping. A very rough guess would be $5000-9000, for a full kit. There is a coupple hundred dollars in AN fittings alone!!. I should have mine running today or tomorrow and dynoed this week, before I go down to Portland for the big meet.


Now you say a full kit, what all does that entail?? does it include hardpipes, bov, both turbos?, fuel mods, basically a bolt on setup? thanks

[trdmk3supra]

HOLLA,HOLLA I want, want, want. Now have to start saving and get movin on my 1jzgte swap on my 86.5 :evil2:

[Troyota]

What's up with the kit? Any news on power and pricing?

[becauseican]

Ok yes it is running great and is a blast to drive. It has 10psi at 3400 rpm and full boost 18+ at about 3900-4000 rpm and pulls hard to 7500 rpm. I absolutley love the ball bearing GT turbo's, there isnt a huge kick when they spool up, it is very linier and just keeps pulling harder. I would say it spools up quicker than Turbo Drifters single GT30 1JZ.

I did dyno tune it the night I got it running, it made 355 rwhp at 14 psi, and 405hp and 395 tq at 19 psi, with very conservitive tunes, af's were low 11's, 10.9- 11.3's. Once i have my E-manage hooked up I will dyno again in a few weeks, and do some runs with race gas and 22-26psi boost. I think this kit can do 500rwhp.

There are a few minor bugs I have to workout, but nothing major. again no final word on pricing but you have a ball park. I might just offer this as manifolds only and you do the rest or I can supply the turbo's too. The full bolt on kit has alot of parts to hand fabricate. I will keep you informed, how many of you are very seriosly intersted?.

[tlo86]

:hitit:

[Troyota]

I am really pretty interested...so far I don't have my 1jz yet, but am seriously looking to find a way to 500-600 HP reliably (street drivable) and quick to spool...so twin turbo is definitely the way I wanna go...keep us posted on developments and definitely on pricing info

[TurboOCD]

Figured I'd wake this thread back up :evil2:

[devil358]

it would definitely be nice to see this kit in production...or at least the manifolds and piping.....and allow the end user to select his or her own size turbo, as the T-2 flanged turbos have a lot of different options available to them now....

This would be a great way to allow people to keep twin turbos and make good power.

I think it would give us a another thing to think about when we're thinking about going single....

[Troyota]

I am STILL planning on a kit very similar to this one. It makes me drool just thinking about it. I don't even think a single is an option for me right now. Twin GT28RS'....Mmmmmm. 600RWHP

[BigPants]

wow thats the exact set up that i want! name your price!

[TurboOCD]

We want this! :1zhelp:

[85?]

I would like to know the price for just the manifold. Maybe even with T3 flanges on it aswell would that be possible?

[RacerXJ220]

BIC 1JZ T3 manifolds made to order....... that would be the hotness.

[7Mboost]

Dam that is some nice work!

[becauseican]

OK people, I have this kit from my car for sale now. I can also build just the manifolds for anyone thats interested. I made 502 whp with this set up at 22psi. Should be capable for 550 whp.

there is about 6000 miles on this setup. Its a fully bolt on kit, you will only need to modify the one intercooler pipe to line up with your current intercooler. I am selling this full kit now heres whats included:

- two gt28R turbo's with the bolt on inlets/ outlets.
- two Hand built BIC Stainless steel manifolds.
- all the oil lines, water lines with block adapter fittings and my polished custom water neck.
- Twin 2.5" stainless steel downpipes
- 3" stainless steel mid pipe, with wideband bung.
- two stainless steel intake pipes with filters.
- intercooler Y pipe, where the two turbo outlets come togeather, with a Tial BOV.

The full kit is $4000,
Kit with out the turbo's is $3000.
Manifolds alone are $1000,

Prices are in US dollars and dont include shipping.

[RacerXJ220]

Badass x 11ty.