ma70 ------> jza70

[bigaaron]

The next socal 1j getting ready to rock. :evil2:

:wavey:
http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/th_DSCF4900.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4900.jpg)

:wiggle:
http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/th_DSCF4916.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4916.jpg)

:naughty:
http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/th_DSCF4911.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4911.jpg)

[Big Wang Bandit]

I see good things about to Happen.


Rakksan will be super happy very soon!

[kwnate]

I see good things about to Happen.


Rakksan will be super happy very soon!
yes Rakkasan will be happy soon, and so will the owner of that white car in the pictures ;)

[bigaaron]

LOL, Nate caught that, it's not Rakkasan's car in the pics above hehehe
The car in the pics is a local, his name is Adrian. The engine is going in tomorrow, and he is scheduled to pick it up on Sat. Yesterday we changed the front and rear main seals, new timing belt. Jose went to 4 different junk yards to find a 5 speed donor for the pedals! Today I had the flywheel surfaced to put a new clutch disk on it, picked up some ARP flywheel bolts for it, Jose installed the 5 speed pedals (this is a manual conversion too), and new clutch master and slave cylinder. I'm doing the harness jumpers tonight.

[Big Wang Bandit]

I got Punkd.


Looks awesome none the less =P

[americanjebus]

Jeeez, so how much does this swap run adrian?? Or for confidentiality how much would it run me? auto to manual to 1jz.

[bigaaron]

Jeeez, so how much does this swap run adrian?? Or for confidentiality how much would it run me? auto to manual to 1jz.

pm sent :icon_wink

[johnathan1]

oooo, a white package!

[bigaaron]

There you go commenting about people's package again. :biglaugh:

[bigaaron]

Almost done! It's actually now in the car and running, only thing left is the intercooler. It was late, I forgot to take another pic.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/th_DSCF4964.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4964.jpg)

[bigaaron]

Here's where it is now, next step is put the hood and bumper back on and then over to the car wash and get that intake plenum cleaned up.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/th_DSCF4984.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4984.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/th_DSCF4989.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4989.jpg)

[bigaaron]

All done, I cleaned the engine bay for about an hour and a half! Adrian picked it up tonight. It runs very strong, everything went great.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion%20customer%20cars/DSCF4992.jpg

[johnathan1]

That looks great Aaron!!! I want you guys to do a 7M build for me eventually. :)

[The Amazing Spider-Man]

that sure is purty. driftmotion swaps ftw

[OneJArpus]

nice IC setup.


Thanks for all ya help Aaron, hope to get ahold of you with good new by friday.

[roadwarrior87]

that's so clean compared to what it was before. good job! can you clean my engine bay? :biglaugh:

[stan]

i was present for the first startup! :)

[Turbosidosis]

I guess in Cali you don't need heat, hehe

looks nice, I guess im gonna hafta buy those samco hoses, and is that intake a driftmoton special? I really like it.

[suprahero]

Aaron, did you use the ic pipe kit that you sell to make those ic pipes? I was just wondering because I bought the kit from you and can go by these pictures................lol

[bigaaron]

Yup, same kit. The 45deg silicone elbow off the turbo outlet is the only thing you may not have, but that can be done with a aluminum bend and a straight coupler instead.

Coming off of the intercooler are two ~120deg pieces cut from the 180 deg aluminum pipes, then the silicone 90's turn up to meet two ~30deg bends cut from the 45deg aluminum pipes. Then coming off of the throttle body and the turbo outlet you can use the two 90deg aluminum pipes. If you need any 45deg silicone elbows I have them in stock.

[bigaaron]

I guess in Cali you don't need heat, hehe

looks nice, I guess im gonna hafta buy those samco hoses, and is that intake a driftmoton special? I really like it.

His heater valve was broken and he was not sure of the intergrity of the heater core, so we decided to bypass it rather then have the floormats floating on 2.5 gallons of red coolant. :biglaugh:

We have the Samco hoses in stock in red, black, and blue.
The intercooler kit is all out of the universal kit (plus a few elbows) and the intercooler we sell.

I sell that entire IC kit for $425 (plus shipping), or $600 installed (for locals only lol). You just have to cut the pipes and drill a few holes in the brackets.
I had the IC install done in about 3 hours.

[PROJECT N00b]

WOW! so lets say i wanted to go 1jz...how much would that run me?