need some help w/ a part number....

[bryanintexas]

anyone have the part number for this pipe......

http://img.photobucket.com/albums/v645/bryanintexas/0a_1.jpg

thanks in advance!

B.

[CRE]

Is that the stock 3000 pipe? Pre89 - 17860-42010 MSRP $142.18

[ForcedTorque]

actually that doesn't look like a stock 3000

[CRE]

I didn't think so either... but unless he wants to get a little more specific that's all he's getting from my N/A driving ass....


Actually, I didn't know if maybe it was just upside down in the pic or something. I did think it looked more like an aftermarket product though.

[bryanintexas]

Is that the stock 3000 pipe? Pre89 - 17860-42010 MSRP $142.18

no, it`s for a "turbo-a" model if i am not mistaken.


any of you aussie guys w/ a parts catalog?!?

[werewolves182]

Thats the non restrictive Group A supra 3000 Pipe. Correct me if im wrong but Im pretty sure toyota does not have a part number for those as they are not made anymore.

[CRE]

Actually, if it's still made you might hit up Jeff.

[bryanintexas]

Actually, if it's still made you might hit up Jeff.

i have the "source":naughty: to order it, or to see if it is still even available, i just need the part # from the epc where the car was made available, that is if it was set up as a replaceable part.

[CRE]

I think the Group A's were a Japan only thing.

[bryanintexas]

You may be right, but for some reason, I thought they were available in Australia as well?!?

[trydrew]

If it were made anymore, everyone would be buying them, and there would be plenty for everyone else. I'm 99% sure they were made for the Turbo A and nothing else. Rare part, limted run.

Also, if you could buy this, chances are, you'd be able to buy a mag. oil pan too. But you can't.

[spinningheadboy]

If it were made anymore, everyone would be buying them, and there would be plenty for everyone else. I'm 99% sure they were made for the Turbo A and nothing else. Rare part, limted run.

Also, if you could buy this, chances are, you'd be able to buy a mag. oil pan too. But you can't.


Well, you are plain wrong. A fellow from down under bought the last few sets of the Turbo A duct. This was a year and a half ago. Brian has connections and he may be able to source a left over part if one is still available. You would not believe what may sit on a parts shelf in some dusty corner for many years.

Brian, It's easier to make your own.......I'm having one made. :)

cwd

[Jeff Lange]

Here's the part number for it: 17860-42060.

There's a huge difference between Group A and Turbo A. Turbo A is a factory produced, retail vehicle, as such parts will remain available for a long time, even though it was a limited production run.

That being said, it's always a gamble as to whether a part number will be in the North American system. This particular number is not.

You can't order this from a North American dealer, but, you can probably still get it in Japan I'd bet (perhaps Australia or New Zealand as well).

Good luck.

[bryanintexas]

Here's the part number for it: 17860-42060.

There's a huge difference between Group A and Turbo A. Turbo A is a factory produced, retail vehicle, as such parts will remain available for a long time, even though it was a limited production run.

That being said, it's always a gamble as to whether a part number will be in the North American system. This particular number is not.

You can't order this from a North American dealer, but, you can probably still get it in Japan I'd bet (perhaps Australia or New Zealand as well).

Good luck.

Jeff,

Thank you!! You are correct sir, it is not in the North American parts system, but I am 1 step closer to possibly getting there if they are still available.

"Brian, It's easier to make your own......."

.....for the cost of this of piece from Toyota, I do believe that's what I'm going to end up doing, but I'm gonna try to get cost and availability 1st.