SIP Racing

[suprarich]

They are reduced base circle type regrinds, so you will need make up shims. On another note, with any cam change, a full re-shim is needed.

[suprarich]

I have seen so many post and talked to so many people during a sale about how it is so hard to find a good machine shop.

Just to let everyone know, I do all forms of machine work. Bore and hone with a torque plate, main line boring, thermal cleaning, magnafluxing, decking the head nad blocks with a cbn cutter, all forms of head work including line boing the cam bores, port and valve work, high speed spin balancing, all forms of crankshaft work, assembly, clearancing, ect

Mail your blocks or heads to me, I only do precision work, so if you are loking for cheap run of the mill work, send it somewhere else.

[Moy]

Hey Rich, the TMS JE Pistons on your site: do those come with rings, or do the rings have to be ordered separately? Reason why I ask is that I do not see rings as a separate item for purchase, yet at other retailers the rings and pistons are separate.

Thanks

[suprarich]

Hey Rich, the TMS JE Pistons on your site: do those come with rings, or do the rings have to be ordered separately? Reason why I ask is that I do not see rings as a separate item for purchase, yet at other retailers the rings and pistons are separate.

Thanks

All my piston prices include the rings. Some sites sell the rings seperatly if there are options in ring choice, but in nearly every case, it is just to make the pistons look cheaper.

[suprarich]

Added a machine serive section to the website for machining the block. Check it out.

[nortti]

Would you be kind enough to respond to my email messages.! ?

Thanks.

[syty1]

Rich, the "search" feature isn't working on your web-site...

[FullNelson]

Hey Suprarich,
Can you PM me a price on an ATI Dampener. Ill be needing one soon. Most definately by the time I get the taxes back.

Thanks,
Bryan

[suprarich]

PM Sent

[suprarich]

Pic of a a 1/2 inch thick 321 stainless weld flange for a 7m customer of mine. Bore holes for the exhaust are 1.5 inch. Look for 1500 hp out of this exhaust flange.

http://img.photobucket.com/albums/v487/rich1969/000_0073.jpg

http://img.photobucket.com/albums/v487/rich1969/000_0075.jpg

[jt2ma71]

Pic of a a 1/2 inch thick 321 stainless weld flange for a 7m customer of mine. Bore holes for the exhaust are 1.5 inch. Look for 1500 hp out of this exhaust flange.

http://img.photobucket.com/albums/v487/rich1969/000_0073.jpg

http://img.photobucket.com/albums/v487/rich1969/000_0075.jpg

If I'm looking for 3000HP, will I need a 1" thick flange ? :D

Can you do a 1J VVTi flange if I send you a gasket? It will be 2 of this, or one long piece (not decided yet) The outside should be the same shape also and 304 should be OK. All bores are going to be round and @ 1.5" diameter. Thanks

http://home.comcast.net/~yiesharon/1jgasket.jpg

[suprarich]

Yes, I can make it. You can call me at 330-541-1122

Sounds like a project going on?

[Doward]

Rich, what have you got in the way of adjustable cam gears? Trying to decide if I want to build my own, but I want to see what's currently on the market, first.

[suprarich]

Titan gears are the best bang for the buck. They are 5 bolt rebaged fidanza gears.

Call me at 330-541-1122

[amichie]

How much is the base circle reduced by on your regrind cams?

Do you regrind the cams yourself?

[jt2ma71]

Yes, I can make it. You can call me at 330-541-1122

Sounds like a project going on?

Building another motor for a future project :)

What times do you accept calls at that number?

Thanks,
~Ron

[suprarich]

How much is the base circle reduced by on your regrind cams?

Do you regrind the cams yourself?

It varies a little cam to cam, but this last batch was .044

Yes, I do them myself on a borrowed machine.

[suprarich]

Building another motor for a future project :)

What times do you accept calls at that number?

Thanks,
~Ron

You can call anytime from 9am to 5pm m-f eastern time. You can try most anytime other than that too. Off those hours I am around the phone now and then and weekends too sometimes.

[amichie]

It varies a little cam to cam, but this last batch was .044

Yes, I do them myself on a borrowed machine.

These might be ideal for a head that uses 2jz valves since they are about 0.5mm longer than 7M valves. IS there any chance you would sell me just an intake cam?

[suprarich]

If you send me a single cam, I would be happy to grind it for you.

[suprarich]

Valve Adjusting Discs are now available in thickness from 2.30mm to 3.50mm in .05mm increments. All are precision ground and hardened to 55 Rockwell. 5.00 dollars each

[Zumtizzle]

Sent you a PM.

I'll call you up on tuesday if you don't respond. ;)

[suprarich]

I got your email!

Added more product to the website. Check out the ever expanding 7mgte line up at www.sipracingmailorder.com

[suprarich]

After a long Backorder the Crank Scrapers will be back in stock on friday. Anyone with a backordered crank scraper will be getting theirs sent out. Will have the 7m, 6m, 1j, and 2j scrapers.

[Moy]

Rich, on your website you have a full Ferrea package, but not parts listed individually... how much would it cost for just the dual springs, titanium retainers, and spring seat locators?

[guido]

i will be interest by spring seat locators too..
any news for BC cams stage 2?

[suprarich]

Rich, on your website you have a full Ferrea package, but not parts listed individually... how much would it cost for just the dual springs, titanium retainers, and spring seat locators?

The Dual springs are 19.98 each
The retainers are 13.69 each
the sring seat locators are 4.05 each

Guido - The stage two BC cams have come off back order and are available now.

[fixitman04]

had an issue with your site yesterday, ordered an accordian hose... but then paypal would not accept you as a vendor? today i get an email from you confirming my order....i have not paid you (i want to.. but paypal wouldent let me) i would go and checkout with another one....but dont want a double order.


also i need a turbo to mani gasket and could not find it on your site...yet you advertise it here. pm me an invoice and il pay you

[supraguru05]

I know you sell torque plates but i was wondering if you would be willing to rent one out

[suprarich]

Fixitman - I got your payment and sent out the part. The turbo to mani gasket is listed on the site. It is on the first page of the 7mgte section. Here is a direct link. http://www.sipracingmailorder.com/servlet/the-298/oem-genuine-toyota-7mgte/Detail

supraguru05 - I don't rent any torque plates, you would be more than welcome to buy one, then rent it out to others to make your money back.

[fixitman04]

that is really weird, paypal said your site rejected it, just looked again and it has been taken from my bank??? alls well that ends well i guess. thanks for the link, il be getting that friday(payday)

[supraguru05]

supraguru05 - I don't rent any torque plates, you would be more than welcome to buy one, then rent it out to others to make your money back.

in that case i need to get a quick and dirty quote from you for some machine work. i already checked your prices online but just want to confirm. would you prefer a email, pm or a call?

[sous]

hey i need to place an order for the valve adjusting shim where i can order

[suprarich]

in that case i need to get a quick and dirty quote from you for some machine work. i already checked your prices online but just want to confirm. would you prefer a email, pm or a call?

you can call me 330-541-1122 10 to 5pm eastern time m-f

Thanks!


Sous - I got your pm, I will look to see what I have in your sizes.

[suprarich]

Blitz nur mt3090's on sale for 600.00 shipped in the USA. Get them while they last, Blitz USA I hear is closing their doors.

[Enraged]

cost shipped to V8M1M3 using USPS?

[suprarich]

Box is too big for usps. I tried before. I can send one fedex ground.

If the box was small enough for usps the weight would make it 115.00 usd postage. Fedex ground is 75.00, so with fedex ground it would be 650.00 shipped. You would have to pay the tax, but I would mark the value to try to avoid it completly.

[Enraged]

what's the weight? I use a shipping company in washington state, may end up cheaper sending it there.

[suprarich]

Another 7m prepped.

http://img.photobucket.com/albums/v487/rich1969/sippics001.jpg


Bore and honed with a torque plate to exactly .0040 clearance on all 6 holes, line bored mains, cbn mill the gasket surface, high speed spin balance the rotating assembly.

http://img.photobucket.com/albums/v487/rich1969/sippics002.jpg


Stapped on the pallet and ready to ship out.

http://img.photobucket.com/albums/v487/rich1969/sippics003.jpg

http://img.photobucket.com/albums/v487/rich1969/sippics004.jpg

[suprarich]

what's the weight? I use a shipping company in washington state, may end up cheaper sending it there.

It is 55 lbs with the box, but the box is like 48-50 inX 20X18 so most companies consider it an oversize. It would be 600.00 shipped to washington.

[suprarich]

What going on here??? Email or call me if you have a question! I don't log onto SM everyday.

Emp - It is not "luck" that moy got a comunication. He emailed me and got an answer the sameday. Call me if you want and need a wuick answer. 330-541-1122 10 am to 5pm every weekday.

And yes, your custom work was shipped back to you last week.

[empera]

What going on here??? Email or call me if you have a question! I don't log onto SM everyday.

Emp - It is not "luck" that moy got a comunication. He emailed me and got an answer the sameday. Call me if you want and need a wuick answer. 330-541-1122 10 am to 5pm every weekday.

And yes, your custom work was shipped back to you last week.

Rich i apologize for the crapping of your thread here and have deleted all posts regarding the topic. Like i said in the email i was a little frustrated only because I was lead to believe that my package was shipped 2 Wednesday's ago. But since you have answered my email, which now i know is best to use, i'm no longer restless. Again I'm sorry for that and hopefully will receive my package soon.

[suprarich]

I should be having 3 or 5 sets of billet cams back in stock soon. If anyone in interested in some real cams for their 7m or 2jz I should have them ready soon. Custom grinds are made to order as well.

[sous]

i have recieve my shims thanks sip

[suprarich]

Good deal Sous! You can tell by the color which one had to be custom made for you. Hope they work out well and let me know what happens after you get to working on the head.

[sous]

they are instal and all are good and the cams are in after that ill need from you the ati damper but later with some cash:icon_bigg

[suprarich]

I will be ready! I usually have the ati damper in stock.

[suprarich]

Listing piles of used parts for the mk3 on ebay. Need something? I may have it.

[suprarich]

Many new items for the 7mgte listed on the website. Check out www.sipracingmailorder.com

[adampecush]

can respond to the email I sent you regarding valve stem seals?

[NashMan]

pmed

[suprarich]

pm's and emails answered1

[NashMan]

when will the 6m crank scrapper be in

[suprarich]

I hope soon. I.J Johnson has been a little slow at keeping these built for me. Most times the ones he sends me are all sold prior to arriving. Should has some soon, you can order one anytime.

[msimsi10]

Hi, I'm looking to rebuild my 7mgte. I was wondering if you could give me a deal if i buy this all at once? I've bought from you before and this is what I am looking for now.

eagle rods w/bolts
Wiesco pistons (stock bore)
clevite bearing kit
arp main studs
arp head studs
HKS 2mm Stopper MHG
Cometic Full Gasket Set

Thanks

[suprarich]

Hi, I'm looking to rebuild my 7mgte. I was wondering if you could give me a deal if i buy this all at once? I've bought from you before and this is what I am looking for now.

eagle rods w/bolts
Wiesco pistons (stock bore)
clevite bearing kit
arp main studs
arp head studs
HKS 2mm Stopper MHG
Cometic Full Gasket Set

Thanks

PM sent to you!

[suprarich]

In approx 7 to 10 days I will have a new line of 7m SIP Racing MLS bead type head gaskets availabe in more "shelf" sizes than any other manufacturer. Prices still under consideration. Sizes will be 1.3mm, 1.4mm, 1.6mm, 1.8mm, 2mm, 2.2mm, 2.5mm and 3mm.

From now on, there will never be the need to just use any thickness available for the 7m.

Taking orders now and I will have them listed on the website in a few days.

[IJ.]

Be nice to get the correct bore sizes as well Rich.

[suprarich]

Yes, The gaskets will be 84mm bore. I wanted the extra material between cylinders as compared to most gaskets that are 86mm bore.

[suprarich]

Gaskets should be ready for shipping on monday or tuesday.


Another 7m built short block going out the door

http://img.photobucket.com/albums/v487/rich1969/partsforsalepics085.jpg

http://img.photobucket.com/albums/v487/rich1969/partsforsalepics087.jpg

[sous]

how much for the block

[suprarich]

how much for the block

For a built block? Each one would be a little different as each block needs different amounts of work done to them. Was you looking for a built block that is ready to go?

[suprarich]

Cometic Full gasket sets have been in short supply the last several months. I now have plenty of them in stock. You can find them on the website under the mk3 Supra section.

[Van]

The 7MGTE needs those "Titan" cam gears :bling:, Rich. Long block going together this Tuesday (20th). Thanks. Van

[suprarich]

On the way Van. I will email the tracking number.

On another note, All the SIP Racing head gaskets re finished and ready. I will post sme pictures and get them listed on the website soon.

Now,,,what will my next project be????

[suprarich]

Stocking new freeze plug kits, oil shaft bearings, sandwhich plate o-rings, and oil pan drain plugs. Will have them listed on the website in short order.

[Enraged]

On the way Van. I will email the tracking number.

On another note, All the SIP Racing head gaskets re finished and ready. I will post sme pictures and get them listed on the website soon.

Now,,,what will my next project be????

Off the shelf rebuilt shortblock with Probe pistons (to support ~550-600hp)?

[suprarich]

Having ready made built short block is on my "to-do" list, but it would not last long with the limited number of buildable blocks I have laying around.

[suprarich]

The SIP Racing gaskets are now listed on the website. Here are some pics.

They are 84mm bore, bead type, stainless steel construction. With heavy inner shims instead of a pile of wafer thin shims, the gaskets will have less chance of between layer blow outs.

http://img.photobucket.com/albums/v487/rich1969/partsforsalepics121.jpg
http://img.photobucket.com/albums/v487/rich1969/partsforsalepics122.jpg
http://img.photobucket.com/albums/v487/rich1969/partsforsalepics124.jpg
http://img.photobucket.com/albums/v487/rich1969/partsforsalepics125.jpg

[Enraged]

Having ready made built short block is on my "to-do" list, but it would not last long with the limited number of buildable blocks I have laying around.

Understandable. I've been considering a rebuild, and having a set price for something like this would be helpful, even having options like an ATI dampener, etc. The side benefit of having a second motor is it could be a single day to swap in the new motor and get it running, rather than possibly weeks or months rebuilding the engine that's in the car.

[suprarich]

I have 4 long blocks around the shop that can be rebuilt to what ever spec someone could wish for ahead of time. If you get the urge and would want to do something, we can always ork up a deal for you!

[billwert]

Sent you a couple PMs on some quotes.

[NashMan]

pmed as well ?

[suprarich]

pm's answered, email is the fastest way to catch me.

[89BklynSupra]

PM sent.

[suprarich]

PM sent.

I answered your email.

[suprarich]

The new billet cams are now ready. Once I have the final cost on them fiqured out I will have them listed on the website. Pics and prices coming soon.

[NashMan]

sent a e mail

[suprarich]

sent a e mail

Got it.

[suprarich]

I will have 10 crank scapers in stock in a day or two. I have several owed to members, but 6 or so are still up for grabs. Order yours now before they are all gone.

[suprarich]

Oil shaft bearing kits and freeze plug kits added to the website. don't rebuild your motor without a new set of each! www.sipracingmailorder.com

[sous]

you have an order

[suprarich]

you have an order

Which stage did you need? 1,2,3,or 4??

Thanks!

[suprarich]

Introducing the newest generation of SIP Billet Cams for the 7mgte. These are true billet grinds made from 14mm diameter 5160 billet bar stock. They are rough machined, the gear is hobbed, rifle drilled, finish ground, then heat treated.

These are a street/race version of the Malta dragster 13mm billet cams.

I have two stages to offer.

The stage one is: Intake cam -10.70mm valve lift, 280 duration@0.00, 238 duration@1mm
Exhaust cam - 9.8mm valve lift, 268 duration@0.00, 224 duration@1mm

Stage two: intake cam - 11.15mm valve lift, 290 duration@0.00, 246 duration@1mm
exhaust cam - 10.25mm 268 duration, 224 duration at 1mm of lift.

1025.00 USD plus shipping

http://img.photobucket.com/albums/v487/rich1969/partsforsalepics131.jpg

http://img.photobucket.com/albums/v487/rich1969/partsforsalepics132.jpg

[Warpath]

I hate to ask a dumb question, but.....(LOL) Are we going to have to upgrade our our springs or are these drop ins?

Thanks,
Jim

[Enraged]

PM sent the other day.

Those cams look nice!

[Moy]

Rich, how much of the head has to be taken away to fit these cams?

[suprarich]

PM sent the other day.

Those cams look nice!

Thanks! Lots of time and work


Rich, how much of the head has to be taken away to fit these cams?

Several MM's mostly around the bucket. Can be done by hand with a die grinder. Not too hard to do, just need to wash the head really well after your done.


I hate to ask a dumb question, but.....(LOL) Are we going to have to upgrade our our springs or are these drop ins?

Thanks,
Jim

HE HE! Actually the only dumb question is the one never asked! Yes, you will need a major spring and retainer upgrade. I would use the ferrera set up.

An affordable dual spring set up is on my to do list.

[suprarich]

SIP Racing spec CP High compression 7mge non-turbo pistons now available. Custom made to nearly any compression ratio. Comes with rings and pins. The ones in the picture are 11:1 compression. All available options including coatings, upgraded pins, gas porting, ect.

Prices start at 800.00

http://img.photobucket.com/albums/v487/rich1969/rods059.jpg

http://img.photobucket.com/albums/v487/rich1969/rods064.jpg

http://img.photobucket.com/albums/v487/rich1969/rods063.jpg

http://img.photobucket.com/albums/v487/rich1969/rods062.jpg

http://img.photobucket.com/albums/v487/rich1969/rods061.jpg

http://img.photobucket.com/albums/v487/rich1969/rods060.jpg

[Leviathan]

Just ordered Eagle rods on your website Rich ::happy claus::

[suprarich]

Thank you Sir! Let me know if you need anything else!

[suprarich]

Picked up a 1990 targa 5 speed NA with 89K miles. I am going to offer it for sale after fixing a few neglect issues. I will have pics soon.

[guido]

do you news for my order?

[mk3sons]

could you get me an turbo accordion hose thing?

[phillyd]

Rich, Can you get back to me about the email I sent yesterday regarding the valve shims I ordered last week? I am looking for a shipping time frame so I can plan accordingly.

Thanks.

[mytmk3]

Just like to say thanks mate for another great deal my goodies arrived today cant wait to put them to good use

cheers scott

[suprarich]

Glad it arrived safe Scott! Don't forget to take pics!

[sous]

got the clutch a week ago in really good shape im really happy
http://i217.photobucket.com/albums/cc73/sous24/HPIM1309.jpg

[suprarich]

Sous - Glad it arrived well. Those things are nice with the new quartermax release bearing.

[bigchris023]

Email sent

[suprarich]

Back in business full time. I want to appologize to anyone who had a delay in getting an email or an order sent out. We had 3 feet of snow fall in a few days and the town was snowed under for nearly a week. I am trying to get caught up with everything right now. Thank you for your understanding.

[koldfire08]

Have any Rebuilt or good 7M heads?
Pm me your reply please.
Thanks,
Jose

[suprarich]

I have 8 or 9 cores that could be rebuilt or you can send me yours to be rebuilt. I seem to be doing 7m and 2jz heads non-stop for the last month or so. Not sure what s going on out there. Had to buy a new set of carbide rotory files from porting so many heads the last few months.