New product, pre 89, 1JZ motor mount adapters

[becauseican]

I figured I would post it here scince this is where people could benifit from it the most. I have been getting alot of pm's about these, so now they are officially released to the public. These brackets allow you to swap in a 1JZ or 2JZ in a pre 89 mk3, with out buying and swapping in a complete crossmember, and use the 87-88 square style motor mounts which are known to be much stronger than the 89+ round motormounts. Details are on my website,
http://www.bicperformance.com/products.htm

http://www.bicperformance.com/images/1jz_brackets2.jpg

http://www.bicperformance.com/images/1jz_brackets.jpg

[Jeff Lange]

In case you want to add this, or just want to know, I've determined that 89 cars up until 01/89 are the ones that still had the older mounts, after that they got the round ones. :)

[91TURBOSUPRA]

nice!!!!great job

[trdmk3supra]

Yo man those look nice how much do they cost and how well do they fit and if there are any clearance issues w/the oli pan not clearing the crossmember. I am going to be putting a 1jzgte in my 86.5 supra so let me know if they are good let me know the price. My number is (609)723-2797 ask for rafael. here is my e-mail also rafael.reyes@mcguire.af.mil/trdmk3supra@hotmail.com. Later :bling:

[SupraMario]

Dude u just made my day, now i wont have to fab up some mounts for the 2jz swap im going to be doing.

[trdmk3supra]

Yo man those look nice how much do they cost and how well do they fit and if there are any clearance issues w/the oli pan not clearing the crossmember. I am going to be putting a 1jzgte in my 86.5 supra so let me know if they are good let me know the price. My number is (609)723-2797 ask for rafael. here is my e-mail also rafael.reyes@mcguire.af.mil/trdmk3supra@hotmail.com. Later :bling: Sorry for the inconvenience BIC I went onto your website and got the price will be purchasing a set soon. Lata

[siman]

Thank god they are done! LOL

:bowdown: :thumbup:

[becauseican]

There is no clearance issues with these brackets, I can easilly get a finger between the oil pan sump and the crossmember. There are a few sets out there already and there havent been any fitment complaints. Price is $175 shipped anywhere in North America.

[p5150]

Dude - you rule. Plain and simple.

[sirkus]

Dude - you rule. Plain and simple.

:werd:

[becauseican]

bump^

[mk3ownZ]

BIC

i sent u a pm, i dont know if you got it, but im interested in your motormounts let me know.

here is my Email. TonyMan3@aol.com

thanks.

[Korg77]

i'd prefer to buy a drawing of the mounts... Is it possible?