Sooooo, what goes here? Anything?

[Reign_Maker]

OK, got the two knock sensor bungs, but whats the third one for? Looks the same as the other two, but as you can see in this "befor" pic, I never had anything there, so what's up with that?

thanks,
Jake

http://i12.tinypic.com/4gf0bjk.jpg

[Yellow 13]

Ive never had anything there either :dunno: Is it even threaded?

[Reign_Maker]

Yep, it is... I actually had my knock sensor in it, then I saw this pic, and was like, oh, wrong hole, lol...

[3p141592654]

The N/A knock sensor goes there!

[jdub]

I believe that's the location for the NA knock sensor.

[lagged]

The N/A knock sensor goes there!

yes sir.

[Reign_Maker]

Thanks guys!

[Reign_Maker]

Anyone know how much that hose on the back costs? Where I can get one? *the big one that goes to the heater core* Mine is really soft where it conencts in the back, so I dont want that to go... Im actually thinking of just replacing every hose on this motor...

[supra90turbo]

Replace them all, Jake.

that little one, this number: http://www.cygnusx1.net/Supra/Library/EPC/291420/Parts/16282.aspx

main picture here: (16282) http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=1603&Page=2

but it doesn't show a price...

[rakkasan]

Anyone know how much that hose on the back costs? Where I can get one? *the big one that goes to the heater core* Mine is really soft where it conencts in the back, so I dont want that to go... Im actually thinking of just replacing every hose on this motor...


I'll check to see if I've thrown all of my 7M hoses out, if not, you can have them. I replaced them all just before I yanked my motor, they might have 200 miles on them......maybe. I might have tossed them, because I didn't think that I could get anything for them.

[Reign_Maker]

Mark = my best buddy!!!

[ForcedTorque]

I believe that's the location for the NA knock sensor.

Damn Jake............That N/A connection may cost you 100HP

[tissimo]

so thats not your block.. i was going to say.. all that money and couldn't even paint it, lol..

[87Superdupra]

Replace them all, Jake.

that little one, this number: http://www.cygnusx1.net/Supra/Library/EPC/291420/Parts/16282.aspx

main picture here: (16282) http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=1603&Page=2

but it doesn't show a price...
speakin of which I was wonderin if anybody knows where to buy a FULL SET of 7M hoses? I'm doin a rebuild and it'd be a good idea to replace all. Need full set of gaskets for manifolds and other shit too If there is a store that does that.

[rakkasan]

speakin of which I was wonderin if anybody knows where to buy a FULL SET of 7M hoses? I'm doin a rebuild and it'd be a good idea to replace all. Need full set of gaskets for manifolds and other shit too If there is a store that does that.

Call Champion Toyota. Be prepared though, the gasket set is not cheap ($300ish IIRC).

[psifactor]

humm, my first thought was to bolt in a brace.

n/a knock sensor does make more sense. Jake just run 3 of them..duh!

[suprastanger507mgte]

that hose is like 18-20 bucks I think. Definitely a good time to get that changed.. lol

[3p141592654]

A few hoses are available in the aftermarket, but most of the molded speciality hoses are only available from Toyota. I figured since the first batch lasted some 16 years, I would stick with what works and ordered the Toyota ones again. This is most of them for a 7MGTE.


04112-42023 $244.59 $244.59 1 engine valve grind overhaul gasket set
16285-42010 $5.71 $5.71 1 turbo water hose
16284-42011 $10.40 $10.40 1 turbo water hose
16283-42010 $12.38 $12.38 1 front hose water bypass #6
16267-42010 $14.57 $14.57 1 TB hose water bypass #3
16261-42010 $12.70 $12.70 1 ISC hose water bypass #1
16264-42040 $19.21 $19.21 1 ISC hose water bypass #2
87245-1B220 $14.26 $14.26 1 Heater Inlet E Hose (valve to heater core)
87245-1B262 $20.47 $20.47 1 Heater Outlet A Hose (from heater core)