Safc II TOYOTA WIRE HARNESS COLORS

[MDCmotorsports]

Guys, I already have the Apexi manual, and I have this thread:

http://www.supramania.com/forums/showthread.php?p=229705#post229705

What Im wanting to know is what COLOR THE TOYOTA wires are that the SAFC wires tie into.

Thanks!

~Jon @ MDC

[aljordan]

That's gonna be year specific Jon. You'd be better served by going with your TSRM, if you have one.

[MDCmotorsports]

Al:

I have the 89 tsrm for the engine and every thing engine related. Will the pinout be in there?

[jtamulis]

I have that info Jon. I'll sit down with my spare harness when you have time.

Jeff

[NashMan]

Guys, I already have the Apexi manual, and I have this thread:

http://www.supramania.com/forums/showthread.php?p=229705#post229705

What Im wanting to know is what COLOR THE TOYOTA wires are that the SAFC wires tie into.

Thanks!

~Jon @ MDC


ummm go to apexi web site and look up the wirieng book it will show a ecu pin out fallow it and you are gold if i remmber right it t2b pin out in the book

cheers

[IHI-RHC7]

Jon, colors are in the TEWD.
http://img453.imageshack.us/img453/4683/page0478kx.th.gif (http://img453.imageshack.us/my.php?image=page0478kx.gif)http://img395.imageshack.us/img395/5633/page0489wx.th.gif (http://img395.imageshack.us/my.php?image=page0489wx.gif)http://img464.imageshack.us/img464/4316/page0496cp.th.gif (http://img464.imageshack.us/my.php?image=page0496cp.gif)
There's the pics of all wires for a 90 ecu, I have the 89 tewd at home, but it's late 89, so it should be the same, the only difference would be pre 89 harnesses..

[chriso]

This is how I did mine for a 90 Turbo. The connectors for the ECU are labeled in the TSRM as R(26 pins), S(16 pins) and T(22 pins). I don't have the info available for the 87-88 however. All wires are to be tapped into and sealed. The only wire that needs to be cut is the Light Green/Red (S2) for the airflow signal.
SAFC-II to Vehicle ECU
Red (Power) to +B - Black/Red (T12)
Green (RPM) to IGF - Light Green/Black (R3)
Purple (Knock Sensor 1) to KNK - White (Clear) (S5)
Gray (Throttle) to VTA - White/Red (S11)
Brown (Ground) to E1 - Brown (R14) (Closest to ECU)
Black (Ground) to E1 - Brown (R14) (Away from ECU - Harness Side)
Pink (Airflow Output to ECU) to KS - Light Green/Red (S2 - ECU Side)
Orange (Airflow Input from AFM) to KS - Light Green/Red (S2 - Harness Side)

Hope this helps. Good luck on your project! Oops, I think I posted in two threads.

[IHI-RHC7]

Cool, those match my pics perfectly, so We've got the verbal and visual covered. ;)

[sleepersupra]

so that is only for the post 89 not pre 89 right cause my car is an '87 and i need the same info. i'm in the same boat

[MDCmotorsports]

Ok now part duex....

Will the same colors work for the super safc (blue screen, not knob style)

[dbsupra90]

Ok now part duex....

Will the same colors work for the super safc (blue screen, not knob style)

yasir. the only difference is the safc I doesnt have the knock wire.

[IHI-RHC7]

Nor does the S-afc ;)

[EvoLuTioN]

weird thing, after I took up the Airflow wires, the car rpm on a cold start drops really fast and when I accelerate while parked it stalls, and on the SAFC 1 it doesnt read out any airflow/kar

[chriso]

weird thing, after I took up the Airflow wires, the car rpm on a cold start drops really fast and when I accelerate while parked it stalls, and on the SAFC 1 it doesnt read out any airflow/kar
I don't know anything about the SAFC-I. The wiring I did earlier in this thread is from my SAFC-II as stated in the title.

[Squid699]

Chriso, you are a great man for putting that up. Should save me some issues when i install. after counting off the wires you mentioned, i still have a blue, yellow and white wire left. Are these not used on a Karmann setup?

[miggles]

the leftover wires are for pressure,flap airflow meters. I havnt wired up my knocksensor but I still get a knock reading from my safc-2 It says in the manual to connect to the knock sensor with the highest output and there are 2 wires, one above eachother.