ALL MN Supra

[Celica Supra]

Since spring is around the corner and the last MN supra thread is now gone. I guess we should start a new one again. Maybe we can get a meet this summer?

[figgie]

summer?? I know murkat is already crusing the Supra. Me I am down for a while. Waiting on some custom stuff to get back to me. :/

[murkat]

Yup, I'm rolling ;)
on one legg, but I'm rolling....

[Celica Supra]

we been rolling. Since yesterday. :D

[Chris-Supra]

I'm rolling- white 87 on mk4's. Meet would be cool

[Ne0z]

i vote chipotle in bville for the weekly meets (if anyone is still actually goin), had dennys with alan a few weeks ago... couldnt even stomach the appetizer

[Celica Supra]

i vote chipotle in bville for the weekly meets (if anyone is still actually goin), had dennys with alan a few weeks ago... couldnt even stomach the appetizer


Chipotle? Naw.... I rather go to University and watch them ricer get pull ever. Plus there alot of places to eat at University. :D

[Ne0z]

dont half the places close though at like 10pm? im talkin a meet where we dont have to run from cops and change hangouts ever 10 minutes... one that would actually be respectable like the mnsc meets are

[Celica Supra]

dont half the places close though at like 10pm? im talkin a meet where we dont have to run from cops and change hangouts ever 10 minutes... one that would actually be respectable like the mnsc meets are

Drive Thur not close. :p

Where we stay we never have to run from cop. They start telling us to leave @ 11:50pm-12:15am. That when we go have some highway fun! ;)

Plus MNSC meet are mostly Mitsubishi. Went to one @ Culver.

[Ne0z]

lol, mostly mitsubishi? not no more, now its GTI's, Tiburons, IS300, there are lots... had over 100 cars at our monthly meet last weekend... and have a regular 25-30 people every night...

[royal91]

Just started up my supra today. Don't look right alot of smoke and water from the muffler.

[jza71]

Just started up my supra today. Don't look right alot of smoke and water from the muffler.


Go drive around for a couple hours and it'll all be O.K.

[Celica Supra]

where can I get my block and head resurface? I just order some racing valve. there are +1MM in size. Who can bored my head for me? any help? also my piston is .050 overbored.

[Ne0z]

syst got his done at TPI Motorsports, not sure if they'd do urs

[royal91]

anybody know the cost of a 1JZ swap? How about the chaser vvti 1jz would it work with mk3's?

[Celica Supra]

anybody know the cost of a 1JZ swap? How about the chaser vvti 1jz would it work with mk3's?


depend on what you need to do before you swap the motor. I know for sure it a $2200+ for the front clip of a MkIII with a 1jz already.

[royal91]

Anybody went to the rock on sunday? (MK2) (MK3)

[Celica Supra]

I went but not with the Mk2. Jza71 went with the red 1jz supra that hit high 12's.

[Ne0z]

almost went but had to watch kids... grr..

[Celica Supra]

There still the next one. May 10 so who going? :D

[Ne0z]

ill try and make this one... but Autox > Drag

April 17th @ Valley Fair is the 1st auto-x for the season! w00t!

[Celica Supra]

Autox > Drag


Yup me too. Just that I am waiting for AARRF to set-up some event for me to run. SO drag will have to do for now. Maybe I come to Autocross also! :D

[Chris-Supra]

Shot in the dark here, but would anyone be willing to put in a tranny for me sometime in the near future? My R154 is on its way out fast and I don't have the resources to do it myself or the money to pay a real mechanic to do it. I'll compensate you for your efforts with cash/beer/trashy women/etc whichever you prefer.

Thanks-
Chris

[paul_mkiii]

Gentlemen-

A few years ago (1999) my brother had a 88T black with gray interior- we bought it thinking it had a BHG but it ended up being a bigger problem...a hole in the block.... so we ended up selling it. Anyone know of it/ what happened to it? I believe it was a Chinese guy that purchased it... thanks

I'm close to buying an 88T pearle white that needs the motor rebuilt....I can't wait!

[murkat]

who's rolling t'nite on the strip???? ;)
ya, my clutch is in :)

[Ne0z]

if i wasnt workin id be up for it man... maybe next weekend

[Celica Supra]

who's rolling t'nite on the strip???? ;)
ya, my clutch is in :)


We saw you by the Viper at foodsmart. We came back but you were already gone. Oh well maybe next friday or saturday. :biggrinbo

[Celica Supra]

ill try and make this one... but Autox > Drag

April 17th @ Valley Fair is the 1st auto-x for the season! w00t!


Did't make it there. So anything excited happen?

[Ne0z]

i ran the same time as a porsche GT2, in my almost stock, n/a, shitty tires supra... lmao (but everyone said the guy couldnt drive worth shit)... still, thats really sad that a GT2 Driver was outhandled by me :) but yeah, 196 cars in total.. only two supras, me and a mkiv

[Celica Supra]

i ran the same time as a porsche GT2, in my almost stock, n/a, shitty tires supra... lmao (but everyone said the guy couldnt drive worth shit)... still, thats really sad that a GT2 Driver was outhandled by me :) but yeah, 196 cars in total.. only two supras, me and a mkiv

red MkIV? is it a grey or sliver Gt2?

[boostjunkie89]

sup guys.... i would be interested in a mkIII meet.. although mine is still apart....i havent been on the forum before, but im a hardcore supra junkie and i would probably be able to setup a discount program for all of you through my shop. midway meets would rock.

[Celica Supra]

sup guys.... i would be interested in a mkIII meet.. although mine is still apart....i havent been on the forum before, but im a hardcore supra junkie and i would probably be able to setup a discount program for all of you through my shop. midway meets would rock.

How much discount are we talking about? :naughty: :x: :biggrinbo :icon_wink

[boostjunkie89]

not sure exactly because my discounts vary by part.... but i can cut you guys a break for sure... i work at propulshun.

[Ne0z]

r u jeff thats doin the 1j swap? if so we have somethin in common, lol, im expecting to get my 1j right before the supra goes into storage so it will be ready for some boostin by next spring... kinda delayed now though since i lost my job... lol

but i have a 1j clip picked out and everything, friend of mine hooks me up on front clips and such, id love to stop by and check out how the 1j is goin some time if its not too much trouble

also, from the looks of the site u guys need a webdesigner or somethin, i can help you out from that angle to get you a nice based layout and any graphic work you may need, if youd like

[Celica Supra]

not sure exactly because my discounts vary by part.... but i can cut you guys a break for sure... i work at propulshun.


How much can you get me those rim in your avatar? I was looking at some at your shop. I wanted some 18 x8 with a 50 and up offset. 5 by 114.3 if possible. These are going on the 04 Mazda 6. The Supra not ready for some rims yet. :(

Let me know. Also in silver or gun metal.

[boostjunkie89]

yeah guys im Jeff... and the falken rims that i set for my avatar are only available in silver or bronze.... let me know a siza and tire sizes you want and i can price em out for ya. as for my 1jz swap i dont hve my clip yet. im stil wating for it to ship over from japan. ill be puttin her back together as fast as i can once it comes in.

[Celica Supra]

yeah guys im Jeff... and the falken rims that i set for my avatar are only available in silver or bronze.... let me know a siza and tire sizes you want and i can price em out for ya. as for my 1jz swap i dont hve my clip yet. im stil wating for it to ship over from japan. ill be puttin her back together as fast as i can once it comes in.


I looking for a 18 x 8 all around and maybe runnin 225/40. But maybe 235/40 after this weekend when I try some Primaxx rims that we got on our Supra. See if 235 will rub the struts. Oh yea the off set have to be in the high 50.

Tell me what you got.

[Ne0z]

that'll be sweet, there is currently only 1jz in the state that i know of... other than that me and you will end up bein the other 2

[boostjunkie89]

yeha ill get you a price on those wheels, but i dont recommend that offset... and its not available either... i thonk the highest i can get would be 45mm i have 45 mm on the front and 38mm on the rear. what model of tire would you like me to get for ya?

[boostjunkie89]

im really excited for the 1jz swap...its such an awesome engine. i should recieve it in the beginning of june, and then give me a week or two to get it swapped. next year i should be rolling abig single on it as well, but thats a long way off so who knows.

[Celica Supra]

yeha ill get you a price on those wheels, but i dont recommend that offset... and its not available either... i thonk the highest i can get would be 45mm i have 45 mm on the front and 38mm on the rear. what model of tire would you like me to get for ya?



Sorry this isnt for a honda. 04 Mazda 6 come with +60MM offset rims. If you can't get it in that offset then forget it because I don't what the rim sunken in the wheel well. Thank for the time. But let me know if you can get any rim in the +55 - +60 MM offset.

[Ne0z]

I hereby invite all MN supra owners to an MNSC car meet... details follow

When: Sunday May 15th
Time: 12pm to 5pm - pls dont come more that 10min early if possible
Where: Weaver Lake Park, Maple Grove MAP (http://maps.google.com/maps?q=8401+Dunkirk+Ln+N+Maple+Grove,+MN&hl=en)

Just a few base rules and info for this meet.
1. No tom foolery pls - anyone raising cane, doing burnouts, just being a jackass will be asked to leave. period!!
2. When you arrive at the park look for the Yellow Staff shirts. We are going to telling people where to park to keep the group compact. We dont get to rent the whole lot.
3. After arriving, pls proceed to the gazeebo and check in with the staff and get an update on the days activities
4. BBQ is obvious. this is not all you can eat. 5$ get you 2 tickets good for 2 grilled items, bag of chips and a soda/water. Extra soda/water is 1$/ea PLS have small bills!!!!!!!!!!


COME AND HAVE SOME FUN, WE ARE EXPECTING AROUND 100-150 CARS TO SHOW! lol, i dont wanna be the only supra there! :-P

[boostjunkie89]

we did a set of 45 mm rims on a mazda 6 and they fit great. 60 mm would be bout 1/2" further in than that. my suppliers said 45-48 would be the right offset for aftermarket rims.

[Celica Supra]

I hereby invite all MN supra owners to an MNSC car meet... details follow

When: Sunday May 15th
Time: 12pm to 5pm - pls dont come more that 10min early if possible
Where: Weaver Lake Park, Maple Grove MAP (http://maps.google.com/maps?q=8401+Dunkirk+Ln+N+Maple+Grove,+MN&hl=en)

Just a few base rules and info for this meet.
1. No tom foolery pls - anyone raising cane, doing burnouts, just being a jackass will be asked to leave. period!!
2. When you arrive at the park look for the Yellow Staff shirts. We are going to telling people where to park to keep the group compact. We dont get to rent the whole lot.
3. After arriving, pls proceed to the gazeebo and check in with the staff and get an update on the days activities
4. BBQ is obvious. this is not all you can eat. 5$ get you 2 tickets good for 2 grilled items, bag of chips and a soda/water. Extra soda/water is 1$/ea PLS have small bills!!!!!!!!!!


COME AND HAVE SOME FUN, WE ARE EXPECTING AROUND 100-150 CARS TO SHOW! lol, i dont wanna be the only supra there! :-P


Well see what happen... The red MkIII need a new transplant so let see if we have time. ;)

[Celica Supra]

we did a set of 45 mm rims on a mazda 6 and they fit great. 60 mm would be bout 1/2" further in than that. my suppliers said 45-48 would be the right offset for aftermarket rims.


We try +45mm rims and they look funny. It has 225/40 tires. I want something that flush the rim with the fender line.

[Ne0z]

u best come.. i feel like im talkin supras with the air, lol ;) naw, but its a good time, at our first sunday meet of the year we had 143 cars roll through at various times of the night

[Celica Supra]

u best come.. i feel like im talkin supras with the air, lol ;) naw, but its a good time, at our first sunday meet of the year we had 143 cars roll through at various times of the night


Can't make it.... Supra not done yet.... :icon_cry:

Plan was to come with 4 MkIII and 1 MkII. But now 3 out of 5 Supra are down. One need a new HG, One need a new tranny the other one fuel pump went out. The other two are still alive and boostin. Maybe we show up with 2 MkIII for lunch there. :D

[Ne0z]

lmao, no supras, damn u's!! lol, thats iight, i played 'hide from the photographers' the whole time... but i think we had 155 cars in the lot at one point... but i was the only supra :( lol, oh well, maybe another time

[murkat]

Yes, another time.

[Celica Supra]

Who going to Chi2k5?

[Ne0z]

oh, BTW jay, u where spotted on mnsc by someone... 'the nicest looking mkiii i've ever seen'... :( lol... sooo jelous

[Apexa]

hey what's up guys
finally back to SM after my computer crapped out on me...
how's everyone's supra's doing?
mines been in the shop for the last two months, but i've almost got it back!
can't wait to take it out on the streets again!

hey murkat, you wouldn't happen to have your old CT-26 would you?

[murkat]

I might make a showing t'nite at the strip.... ;) ct26 stocker gone long time ago Apexa

[Ne0z]

didnt see anyone down there... but i did see a white mkiii and a red 89+ turbo mkiii...

[Apexa]

I might make a showing t'nite at the strip.... ;) ct26 stocker gone long time ago Apexa


damn. cuz mine is shot, and i don't want to pay hundreds for a rebuild :icon_sad:

[Celica Supra]

I might make a showing t'nite at the strip.... ;) ct26 stocker gone long time ago Apexa

How the Sp61? The red Supra is looking for a new turbo.

damn. cuz mine is shot, and i don't want to pay hundreds for a rebuild :icon_sad:

I got one.... :biggrinki


didnt see anyone down there... but i did see a white mkiii and a red 89+ turbo mkiii...


Those are our MkIII.... :icon_cool

[Apexa]

I got one.... :biggrinki


is it for sale, xai?

[Celica Supra]

is it for sale, xai?


Yea but it got some chip fins but spool well...

[Ne0z]

did u see me then down there? maroon MKIII... exhaust... 87...

[Celica Supra]

did u see me then down there? maroon MKIII... exhaust... 87...
Yea, you drove by us heading toward dale I think.

[Apexa]

we should have a little supra meet at my place, again, as soon as i get my car back. the shop said ill have it back right around the 4th of july. hopefully more people than just murkat will show up this time! :D

[Ne0z]

i might be able to show if its on a weekend or at like 8:00pm cause i work from 7am-6-7pm

[Celica Supra]

we should have a little supra meet at my place, again, as soon as i get my car back. the shop said ill have it back right around the 4th of july. hopefully more people than just murkat will show up this time! :D


Hmm.......... might be intresting...... ;)

Let me know when and where.

Oh BTW who rollin tonight?

[Apexa]

can't wait to get the supra back with all it's new goodies! :D
the list:
Spearco Intercooler kit
Fluidyne Radiator
Brand spanking new head
HKS 1.2mm metal head gasket
ARP head bolts
Rebuilt turbo
and i cant choose between the HKS SSQ BOV and the A'Pexi Twin chamber BOV...


granted it's nothing that'll boost HP incredibly, it'll still help a lot :)
any opinions on the BOV's?

[Celica Supra]

can't wait to get the supra back with all it's new goodies! :D
the list:
Spearco Intercooler kit
Fluidyne Radiator
Brand spanking new head
HKS 1.2mm metal head gasket
ARP head bolts
Rebuilt turbo
and i cant choose between the HKS SSQ BOV and the A'Pexi Twin chamber BOV...


granted it's nothing that'll boost HP incredibly, it'll still help a lot :)
any opinions on the BOV's?



HKS!!! :D

[Apexa]

HKS!!! :D



hahaha. any reason on why HKS?

[Celica Supra]

hahaha. any reason on why HKS?

perform and sound nice.

[Apexa]

perform and sound nice.

is it better than the A'pexi?
cuz i like the apexis sound better

[Celica Supra]

is it better than the A'pexi?
cuz i like the apexis sound better


I hear it on a civic but not on a supra. Might sound different. But go for what you like.

[Ne0z]

turboxs has the best sound so far that i've heard... cant remember which one, but im thinkin its the hks that sounds like more of a squeek... totally queer soundin

[murkat]

unless you have the supporting mods, the BOV exhaust needs to be routed back to the intake like stock,(closed loop), if not, you be askin for more trouble Apexa

[Ne0z]

i agree, just get a bypass valve...

[SySt]

I am running the GReddy Type S BOV venting to the atmosphere. I am having no issues with it. Ans NeOz can talk about the improved sound over a BPV. Only difference in engine performance I notice is the occassional drop of idle when coming up to a stop light, never dies on me though.

[Apexa]

what would the supporting mods consist of?

[Ne0z]

hampsters... running in wheels...

[Celica Supra]

what would the supporting mods consist of?


For my unlce Red Supra that is runnin a HKS BOV he got
-Lexus AFM
-Lucas 550CC
-Intake filter
-SupraSports elbow with 3inch all the way with a cat but no muffler
-12 Lbs boost
-S-AFC/ A/F/R
- 8 MM MSD

Vented fine with no problem. But you can always use the bosch By Pass Valve. It only $20 from Maplewood Imports. Make it seem like you have a Porsche. :naughty:

[SySt]

Go with a BOV in my opinion, they are adjustable. And if you get the Type S, you can always plumb it in after the AFM anyhow. Supporting mods? You should be able to run a BOV on a stock Supra with nomore problems then a modded one.

[Ne0z]

i wish i had a turbo supra :( lol... oh, luke.. btw... its installed, lmao, well, half way, just have to find a way to hook the other part to the firewall... it allready handles twice as good than the megan racing pos, lol

[Celica Supra]

So who rollin tonight? :D

[Apexa]

So who rollin tonight? :D



haha i'll roll with my buddy in his 2000 neon!

[Ne0z]

we should all meet somewhere tonite...

[Ne0z]

w00t, New Toy!! :-P
http://www.trancemotorsports.com/Supra/tris1.jpg
http://www.trancemotorsports.com/Supra/tris2.jpg
and here is just a pic of the supra in the garage... just got bored, lol
http://www.trancemotorsports.com/Supra/bored.jpg

[Celica Supra]

Apexa,

So when that little meet happening? Wanna get the Supras there before they go under the knife. :D

[Apexa]

Apexa,

So when that little meet happening? Wanna get the Supras there before they go under the knife. :D


haha well, since stormchasers is being really fucking slow, i probably won't have mine there, but, if you guys still want to have a meet at my place, i'm down for that. how does friday sound, for now?

neoz, is that easy to install? and is it worth it?

[Ne0z]

soooooo worth it... and sounds like a plan sometime SOON

[Apexa]

meet still on?
if you're gonna show, my address is 76 geranium avenue west, saint paul, minnesota 55117
and gimme a call if/when you decide to head over.
or if you need directions, i can do my best to help.
651 488 7016

-apexa

[murkat]

murkat be out on the strip t'nite..

[Apexa]

murkat be out on the strip t'nite..



want to make some gas money and bring me along? :D:D

[Celica Supra]

Tonight was fun,FUN,FuN!!! T-61 VS Sp61 in action!!!! :D Man it was fast!

[murkat]

We bailed about 9:30ish, not much really going on... what happen'd to froggy town?

[Celica Supra]

We bailed about 9:30ish, not much really going on... what happen'd to froggy town?
Not much untill a gruop of DSM and Mr2 wanted to race MkIII's! :biglaugh:
T-61 vs SP61!! The SP61 got TOOK !!! :aigo:

[royal91]

which one of the supras got the sp61? Did anybody take on the dsms or the mr2s?

[Celica Supra]

yea, jza71 took both of them. The Mr2 has the Sp61. The MkIII has the T-61.

[turboman]

So where do the supras hang out in minnesota?

[Apexa]

So where do the supras hang out in minnesota?


we all hang out? the only real hang out i can remember is when we had 7 supras at foodsmart that one time. haha
i was trying to have a meet friday, but no one showed up or called.

[Ne0z]

schedule better fool... 952-412-8686... gimme a call next time

[Apexa]

help!

i need a directly bolt on turbo that isn't horrible for under $1000 that includes wastegate, if it it doesn't have an internal one.
any suggestions? i'm thinking the SP58GT for $950 but i don't know. i don't know about wastegates or anything else.

plus! i need a head thats either rebuilt, or can be rebuilt, that hasnt already been rebuilt for less than $600 can anyone help out? it can be a blank head, too.

thanks guys.
-apexa

[Celica Supra]

So where do the supras hang out in minnesota?


At JZA71 house! and foodsmart and my house and western and anywhere we basiclly want to. :bigthumb:


You see I only have about 6 Supra owner phone number. That's why when we usually hang out it only have 6 supra. You see it really hard to get a hangout or meet when you can't call them or post on the net and hope they will see it.

Anybody get the point?

How about the 22nd or the 23rd that next friday and saturday. One week to decide if you want to come or one week to see if you can make it.

[Celica Supra]

help!

i need a directly bolt on turbo that isn't horrible for under $1000 that includes wastegate, if it it doesn't have an internal one.
any suggestions? i'm thinking the SP58GT for $950 but i don't know. i don't know about wastegates or anything else.

plus! i need a head thats either rebuilt, or can be rebuilt, that hasnt already been rebuilt for less than $600 can anyone help out? it can be a blank head, too.

thanks guys.
-apexa


Just upgrade the stock CT to 60-1 Trim. I got a head! :D

[Apexa]

Just upgrade the stock CT to 60-1 Trim. I got a head! :D


i heard upgrading the ct26 is pretty much useless, as itll just break again...

how much for the head?

[Apexa]

just out of curiousity... anyone know an estimated RWHP number with these mods?
spearco intercooler kit
fluidyne radiator
sp59gt turbo
turbonetics evolution wastegate
K&N Intake

[Celica Supra]

i heard upgrading the ct26 is pretty much useless, as itll just break again...

how much for the head?


Like I told you before I can;t give you a price untill you see it.

depend on WHO upgrade you CT. Different company, different result.

[Celica Supra]

just out of curiousity... anyone know an estimated RWHP number with these mods?
spearco intercooler kit
fluidyne radiator
sp59gt turbo
turbonetics evolution wastegate
K&N Intake

Fuel cut should be kickin......ran 15 psi and fuel cut... change to lexus afm and boost 20 psi no more cut! :D

depend on how much you boost and what fuel mod you have. Also mileage your motor has.

get an 3inch open elbow + dp+ exhaust also. :biglaugh: You like it even more!

[Apexa]

Like I told you before I can;t give you a price untill you see it.

depend on WHO upgrade you CT. Different company, different result.


as long as it's rebuildable... i'll buy it. just gotta know a price :)

[Apexa]

Fuel cut should be kickin......ran 15 psi and fuel cut... change to lexus afm and boost 20 psi no more cut! :D

depend on how much you boost and what fuel mod you have. Also mileage your motor has.

get an 3inch open elbow + dp+ exhaust also. :biglaugh: You like it even more!


haha. probably just 10psi at the most for now. until i can afford lexAFM and injectors.
and it'd be with just those mods. no fuel mods or anything. milage is about 17k on rebuilt engine.

im working on exhaust, fixing the necessary things first, though :D

[SySt]

10psi on a mild turbo upgrade may flow the same mass of air as a CT26 at 13-15psi. Best bet is to keep the stock CT26 if thats all you want to run as you'll have better turbo response.

[Apexa]

10psi on a mild turbo upgrade may flow the same mass of air as a CT26 at 13-15psi. Best bet is to keep the stock CT26 if thats all you want to run as you'll have better turbo response.


yeah, but my turbo is pretty much fucked. and would need to be completely rebuilt, anyway. and this turbo is a very quick spooling turbo, so it says. and i figure if i need to get it fixed, might as well upgrade it.

[Celica Supra]

yeah, but my turbo is pretty much fucked. and would need to be completely rebuilt, anyway. and this turbo is a very quick spooling turbo, so it says. and i figure if i need to get it fixed, might as well upgrade it.


Well you could alway drive your car without the turbo. :naughty: And see what you can do against those honda/acura.

[jza71]

just out of curiousity... anyone know an estimated RWHP number with these mods?
spearco intercooler kit
fluidyne radiator
sp59gt turbo
turbonetics evolution wastegate
K&N Intake

You WILL get fuel cut at about 10psi on WOT with those mod.......and I believe the wastegate on that turbo holds about 12psi. So you may not be able to drop the boost any lower than 12psi. That means you will never be able to run your car at WOT.

[royal91]

I am gonna put in some springs and shocks pretty soon. Anybody done it before can walk me through it???

[Celica Supra]

I am gonna put in some springs and shocks pretty soon. Anybody done it before can walk me through it???


The back a bitatch.

[Ne0z]

At JZA71 house! and foodsmart and my house and western and anywhere we basiclly want to. :bigthumb:


You see I only have about 6 Supra owner phone number. That's why when we usually hang out it only have 6 supra. You see it really hard to get a hangout or meet when you can't call them or post on the net and hope they will see it.

Anybody get the point?

How about the 22nd or the 23rd that next friday and saturday. One week to decide if you want to come or one week to see if you can make it.

Sounds good, ill try and make it...

Also! I spotted 3 supras yesterday!

1. Two-Tone With TRD Badge and Clear Front Corners in North Saint Paul.
2. Bright Yellow in North Saint Paul
3. White with Chrome Rims, maybe 18's? past him oncoming on France or sumthin... right by 35w

[Apexa]

At JZA71 house! and foodsmart and my house and western and anywhere we basiclly want to. :bigthumb:


You see I only have about 6 Supra owner phone number. That's why when we usually hang out it only have 6 supra. You see it really hard to get a hangout or meet when you can't call them or post on the net and hope they will see it.

Anybody get the point?

How about the 22nd or the 23rd that next friday and saturday. One week to decide if you want to come or one week to see if you can make it.


how about the 22nd? cuz my birthday is the 23rd!

[SySt]

I'll show for sure, what is the address? And what time? Is this a sure thing or not?

[Apexa]

xai, what happened, man? you never called/showed...

[Celica Supra]

xai, what happened, man? you never called/showed...


Shit I forgot about it. I was helping Supra_Dre with his MHG and totally forgot. Sorry man.

[Ne0z]

soo.. wtf will we be doin at this 'meet'

[Apexa]

Shit I forgot about it. I was helping Supra_Dre with his MHG and totally forgot. Sorry man.


it's cool. can you stop by tomarrow??

[Apexa]

alright. so even though i wouldn't be able to WOT my supra with the SP58GT, would i still be able to drive it without the lexafm and bigger injectors?

[Celica Supra]

of course the stock injector is 440cc which is good for 440WHP.

Apexa, You never PM me your Addy or telephone.

[Apexa]

of course the stock injector is 440cc which is good for 440WHP.

Apexa, You never PM me your Addy or telephone.


yes i did. something probably just didnt happen. i'll PM them to you again

[Celica Supra]

So what going on this weekend?

[royal91]

I should be getting my T4 soon :icon_razz

[Ne0z]

damn u both...

im Still...
http://img71.imageshack.us/img71/3465/scottscar0wr.jpg

for now...

[Celica Supra]

damn u both...

im Still...
http://img71.imageshack.us/img71/3465/scottscar0wr.jpg

for now...


we got some clutch and brake pedals and stuff for 5spd conversion. Took it off another supra.

[Ne0z]

anything would help but at the moment i dont have the cashflow to do the conversion...

also, whos all goin tonite? im gonna try and make it

[Celica Supra]

We are but don't know what time. Just look for 3 Mk3 and if tonight is speical then maybe it MIGHT show up. ;)

[Ne0z]

i tried to make it but things got in the way of me getting there... sorry guys, maybe another time

[Celica Supra]

CHI2k5 is this weekend who going?

[royal91]

here's my new T4 and my old ct26. The T4 is just alittle bit big.
60 A/R not sure what that means?

[Celica Supra]

man our trip to CHI2k5 was mess up!!!! :( pix to come.

[Ne0z]

Yeah, so at a party last night in apple valley, some drunk bastards through cinderblocks through my front and rear windows as well as my friends Turbo-II Rx7's Windows... I did nothing to them and my friend did nothing to them... aparently 'they werent trying to go after MY supra... but another persons... UGH!! Pics Below...

http://i23.photobucket.com/albums/b384/Ne0z31/vand3.jpg
http://i23.photobucket.com/albums/b384/Ne0z31/vand2.jpg
http://i23.photobucket.com/albums/b384/Ne0z31/vand1.jpg

[MDCmotorsports]

Sorry about the block throwing... but all of you MN guys better show up next year to chicago.

[Celica Supra]

Sorry about the block throwing... but all of you MN guys better show up next year to chicago.

We (Me, JZA71, and MNAUTO) we're on our way. About 1 hour and 45 mins of driving my unlce Red MkIII's wheel decided to come off. 1 hour of trying to put the damn wheel on. My unlce slowly drive it to a gas station as Jza71 was watching from behind. Our Trip ended up at the gas station. CHI2k5 was the same day as Rockfalls so we decide to go to Rockfall instead and leave the red Supra at the gas station. Man that was out trip to CHI2k5. Hope we can make it next year.

[Chris-Supra]

Anyone have a spare igniter and coil pack for a 7mgte I could try on my engine? I'll buy it from you if it fixes my problem- Car wont start (no spark) getting a code 14.

[Celica Supra]

Anyone have a spare igniter and coil pack for a 7mgte I could try on my engine? I'll buy it from you if it fixes my problem- Car wont start (no spark) getting a code 14.

I do. Just let me know.

[supra87t/t4]

Chris I have a coil pack if you need one. Come to think of it I have a spare ignitor too.

You should check the wiring at the connectors for the CPS and Coilpack

Glen

Local project car for sale:
http://www.supramania.com/forums/showthread.php?p=48754#post48754

[Chris-Supra]

I got it all sorted out- Thanks anyway. Checked all the grounds, rewired the CPS, regrounded the coil pack and fixed the MAF/T 'igt' wire that somehow lost its electrical tape and was grounding out on the frame. And it starts and runs great now, no codes.

Now I have to get this big IC, some hardpipes and the FFI I ordered from that Sethron guy (get it next week) installed.

[murkat]

To all I have met, encountered, Nice meeting you. I'm off to nashville next week perminatly. Jay

[Celica Supra]

Oh damn, well nice meeting you! Farewell to a nice guys & nice supra. The supra is going too right?

[murkat]

yup. trailer queen, in style ;)

[Apexa]

To all I have met, encountered, Nice meeting you. I'm off to nashville next week perminatly. Jay


seeya around jay. have fun down there

[Apexa]

...where'd everyone go..?

[Celica Supra]

busy fixing Supras around town.....

[Ne0z]

supra is down for the winter, so i gots me a purple neon :-P

[Celica Supra]

Just pick up a 87t with BHG... anyone got an spare ignitor (how ever you spell it) for sale?

[supra87t/t4]

I'm sure I have a spare or two.

Glen

[Celica Supra]

How much do you want for it? I just pick up a 87T without one. Also it doesn;t have BHG! :D JZA71, my uncle and I am sure it not a BHG! Just waiting for a compression test to make sure that the motor is still good.

[supra87t/t4]

$20? I'll have to get it from my parent's house this weekend, so let me know if you want it.

[Celica Supra]

$20? I'll have to get it from my parent's house this weekend, so let me know if you want it.

Yea thanks I take it. Just let me know when you get back.

[Celica Supra]

Glen,

It the one circle in the picture right?
http://img.photobucket.com/albums/v449/s0_cl0se/987.jpg

If it is then I will take it. Also do you have a ct-26 gasket? The gasket that between the turbo and the exhaust manifold. I need one also. Thanks!

[supra87t/t4]

Yes, that is the ignitor, but sorry, I don't have any left. I can look for the turbo gasket though.

Glen

[supra87t/t4]

Sorry, I didn't find the gasket either. (I really need to clean up my spare parts area)

Glen

[Celica Supra]

That ok, you have a spare radaitor then?

[Apexa]

anyone remember off the top of their head what ARP headbolts have to be torqued to?

[Celica Supra]

Anywhere above 65lbs. I gonna torque mines to 90lbs.

[Ne0z]

u gettin closer to gettin the supra done?

Just found out mine has a BHG... but do i care?! NOPE! new engine by late-spring early-summer anyways :)

[Apexa]

u gettin closer to gettin the supra done?

Just found out mine has a BHG... but do i care?! NOPE! new engine by late-spring early-summer anyways :)



hahaha. who knows, anymore.. :icon_conf
i get a t3/t4 hybrid turbo though :)

and if i torqued them to about 80 would that be fine for me?

[Chris-Supra]

u gettin closer to gettin the supra done?

Just found out mine has a BHG... but do i care?! NOPE! new engine by late-spring early-summer anyways :)

Hey since your going 7m- can I interest you in a maf/t setup (maf/t and 3" gm maf)? I plan on doing something different and will be letting the maf/t go, I'll hook any local guys up cheap ;) if someone around here wants it.

[Ne0z]

I might be gettin Luke's GM Maf... dunno yet though, im gettin his engine/tranny and stuff this spring when he does his LS1 Swap

[Chris-Supra]

hmm, i ddint think he had gone maf yet, He get the MAF/T as well? I'll sell you just that- cheap :) let me know-

Anyhow, anyone willing to let me use a set of rear wheels with drag radials on them for this coming sunday? I'm going to rock falls hopefully and my street tires are bald as shit, and I want a semidecent time. Long shot but hey never know, I'll compensate a little bit if needed- thanks

Chris

[Celica Supra]

Hey since your going 7m- can I interest you in a maf/t setup (maf/t and 3" gm maf)? I plan on doing something different and will be letting the maf/t go, I'll hook any local guys up cheap ;) if someone around here wants it.


Pick me!! Will price depend. :naughty: I was looking in to that rather than a Lex AFM. Well anyway how cheap are we talking?

[Chris-Supra]

uh what are they new? $199 for the maf/t and I got my maf for $10... $150? for the trans and maf

[Ne0z]

he hasnt installed it yet, but with an LS1 what will he need with the parts?... lol

[Chris-Supra]

Yeah it'll be interesting to see how he manages to get an ls1 into and working properly in his mk3. If he pulls it off, I cant wait to see it-

[Celica Supra]

uh what are they new? $199 for the maf/t and I got my maf for $10... $150? for the trans and maf


Sound good. I will get back at you when I have the $$$$.

[Apexa]

lukes putting an LS1 into his supra? why?

[Chris-Supra]

Yeah, I dont know, but LS1s are badass motors just the same as 7m's so if he can pull it off, it'll be a fast car. I prefer my turbo 6' but to each their own.

[Ne0z]

He's doin that cause he wants more torque... lol... and the LS1 weighs pretty damned close to our 7m... his Resale Value will be awsome too, so basically for the price of building his 7m... he's getting an indestructible motor... and just thing if he turbo's it :-P lol

[Chris-Supra]

HAHA I suck at the drag racing. fastest was 14.3 hahahahaha of course it was my first time ever, and the rock was as slippery as ever. Time for more mods and try the drag racing thing again next year.

EDIT: Thanks to Pao for the advice to at least get me into the 14's, Thanks man-

[Celica Supra]

HAHA I suck at the drag racing. fastest was 14.3 hahahahaha of course it was my first time ever, and the rock was as slippery as ever. Time for more mods and try the drag racing thing again next year.

EDIT: Thanks to Pao for the advice to at least get me into the 14's, Thanks man-
Are you still runnin the MAFT? If not what are you using to measure the air?

[Apexa]

He's doin that cause he wants more torque... lol... and the LS1 weighs pretty damned close to our 7m... his Resale Value will be awsome too, so basically for the price of building his 7m... he's getting an indestructible motor... and just thing if he turbo's it :-P lol



touche'
but still. i thought he was in love with the 7m?

[Chris-Supra]

Yeah I'm still running the maf right now, I'm just about to park the supra for the winter though, wanted to get at least one day in at the track though. I'll have the maf available in a week or two at the most.

[Ne0z]

Originally, i was gonna do the LS1 and he was gonna keep the 7M... now i guess we swapped on it, lol

[Celica Supra]

Yeah I'm still running the maf right now, I'm just about to park the supra for the winter though, wanted to get at least one day in at the track though. I'll have the maf available in a week or two at the most.


What are you going to use then? Stand alone? Or the AFM? Hope you don;t mind me askin alot because I was just wondering. I will let you know in a week or two also. Still tryin to work a deal with this HKS VPC. :naughty:

[Chris-Supra]

Not for sure yet, either emanage pro/maf pro, Maybe* (probably not) a MAP Ecu, wideband for sure :) Just upgrading a bit- Unless I get really motivated and go standalone, which is entirely possible. We'll see. The goal one way or another is 500rwhp. Not even sure of what turbo I'm going to use yet... Soo many decisions.

[Chris-Supra]

Anyone have a spare ignitor and coil pack I could try on my car to eliminate them as a possible problem? I'll buy if they work for me. Missing bad under >7psi boost.

Thanks

[Ne0z]

^^lmao, 3 in a row, i think ur talkin to urself ;)

[Chris-Supra]

2 in a row comeone, I'm not that crazy :)

[Ne0z]

lmao, i suppose, u and celica supra drive me nuts, i vote you change ur names...

You will be: 'Guywiththatonewhitemkiiiturbowiththemkivrims'
and he will be: 'Guywiththecelicasupraandthe87suprawhosnameusedtoresemblechris's'

[Celica Supra]

Anyone have a spare ignitor and coil pack I could try on my car to eliminate them as a possible problem? I'll buy if they work for me. Missing bad under >7psi boost.

Thanks


I can lend you my coilpack and I will talk to my unlce if he can lend you his ignitor. But sure yet on the ignitor because he might still be driving his Supra.

[Chris-Supra]

Thanks anyway- but I found out my injector grounds were loose causing waht I thought was a bad miss. Tightened them and it runs fine, check the simple stuff first people, I'm still learning to do that slowly :)

[Celica Supra]

Nice weather these day.... Maybe acouple more cruise and time to put the Supras away...

[murkat]

Nice weather these day.... Maybe acouple more cruise and time to put the Supras away...

whatcha talkin about????

oh...........

thats right.............


your up in the tundra ;)

[Celica Supra]

whatcha talkin about????

oh...........

thats right.............


your up in the tundra ;)


How ya doin buddy!!

[Chris-Supra]

So did anyone want my MAF translator? Or should I sell it on supraforums?

Anyone want a 60trim CT ($400 for MN guys) or a BIC DDP ($250), Neoz- I know you want this :) perfect compliment to your 7m swap this winter- I'll give it to any of you guys first crack again-

[Ne0z]

Not sure how im standing on the supra at the moment may be gettin rid of her and buying a Turbo/5spd next summer once i get out of debt (about 3500 in debt, im so screwed rite now)... luke fried his 5spd tranny on his car too... so i wont be gettin that tranny, we will see though, im not sure whats gonna happen

[Celica Supra]

So did anyone want my MAF translator? Or should I sell it on supraforums?

Anyone want a 60trim CT ($400 for MN guys) or a BIC DDP ($250), Neoz- I know you want this :) perfect compliment to your 7m swap this winter- I'll give it to any of you guys first crack again-


I want the MAF.... also the DDP.... But then only one at a time... I need to get the freakin MHG first....

[Chris-Supra]

ack I have like 122353245 people wanting the MAF and DDP. n/m he didn't send me the money for the maf. You can have the maf and sensor if you want them Celica_supra- $150 for the package.

And theres a guy in brooklyn center (I think) that wants the ddp I guess. I'll let you know about the DDP after he gives me a response-

[Celica Supra]

ack I have like 122353245 people wanting the MAF and DDP. n/m he didn't send me the money for the maf. You can have the maf and sensor if you want them Celica_supra- $150 for the package.

And theres a guy in brooklyn center (I think) that wants the ddp I guess. I'll let you know about the DDP after he gives me a response-


I have to see what is left after I get the head machine and get the MHG from Suprasports down in Stillwater... Also I need a iginitor... But I will let you know ASAP.

[Chris-Supra]

how soon? I have a few other people ready to give me money for it- I'll hold it for you though if your fairly certain youll take it.

[Ne0z]

^^Supra sport is an awsome place, the guys there are hella helpful... if ya havent been there though... have fun finding it ;)

[Celica Supra]

how soon? I have a few other people ready to give me money for it- I'll hold it for you though if your fairly certain youll take it.

Let those guys have it and let me know if they come through or not.

Been to Supra Sport acouple of time nows. :icon_bigg

[family-supra-turbo's]

Hey what up guys. Any big plan for winter......... lets have a rollcall all supra lover.......................

[Celica Supra]

Hey what up guys. Any big plan for winter......... lets have a rollcall all supra lover.......................


Try to get all the Supras runnin correct for TX2k6. Also add acouple go fun parts.:naughty:

Xai
87 Toyota Supra Turbo 5Spd
- Under going MHG and a few goodies.

86 Toyota Celica Supra P-Type 5Spd
- Under going something unique.:biglaugh:

[Chris-Supra]

See sig :)

[Apexa]

hmmm.. i have to actually get my car back before i can do anything to it..
been in the shop 6 months and going now...
but hopefully ill get an intercooler and at least some suspension in it before spring.. oh... and exhaust haha

oh, and
kirt
saint paul, minnesota
89 toyota supra hardtop turbo

[family-supra-turbo's]

my supra well be running this weekend...so i'll be driving it and might go to midway for the hell of it...see if i see any mk3 supra there... p/o
joe
stp,mn
87 turbo hahahahahahahahahahahha i'mmmm lovin it ????????

[Celica Supra]

my supra well be running this weekend...so i'll be driving it and might go to midway for the hell of it...see if i see any mk3 supra there... p/o
joe
stp,mn
87 turbo hahahahahahahahahahahha i'mmmm lovin it ????????


You got your radaitor in?

[Ne0z]

figured i'd let u all know that i will no longer have a supra prolly after this week

[Celica Supra]

200 replies! :D

[Ne0z]

Just lettin you all know that i no longer have a Supra anymore... too much crap has happened to it ie: BHG, Smashed out windows, ruined paint... ect...

You may see me around in a MKII VW GTI though if i am able to get it...

However, if anyone wants i am selling my CP Racing Tri-Strut Bar for 65$ locally

Maroon 87-88 Spoiler is also for sale, OBO on that

[Chris-Supra]

oh shit i want that bar- pm sent man

[Ne0z]

Replied!

[Apexa]

ill take the strut bar if he doesnt :)

[Chris-Supra]

Sorry already mine :)

[Celica Supra]

Crap was gonna reply but guess I was to late...

[Ne0z]

haha, yeah, thanks for takin that off my hands... i needed the money bad since my other car just died today

[Chris-Supra]

No problem, damn good deal, I should be thanking you.

[ToySup88]

My supra's been running like shit, missing under load but only when hot. I tore into it today and saw that ISC hose was cracked (between the ISC pipe and the ISC). It broke in two trying to get it off. Need a replacement asap and its Thanksgiving plus its probably an order part. Anyone in MN have on they can part with (I'm in Eagan)??

[Chris-Supra]

I went to a parts store and got some 3/4 heater hose and just ran it strait from the AFM to the ISC and got rid of silly hard pipe whe n my ISC hoses crapped out. Of course I got rid of the ISC entirely shortly after that. ISC's are overrated.

[Celica Supra]

My supra's been running like shit, missing under load but only when hot. I tore into it today and saw that ISC hose was cracked (between the ISC pipe and the ISC). It broke in two trying to get it off. Need a replacement asap and its Thanksgiving plus its probably an order part. Anyone in MN have on they can part with (I'm in Eagan)??


I think I got it. Let me know!

[ToySup88]

The Sup is back running good again. It turned out the missing problem was due to bad plugs. I was surprised since I had put new ones in 1 year ago. Thanks all for offers of help and thanks SySt for the hoses.

[Ne0z]

yeah, SySt loves grabbing hoses...

[Celica Supra]

Back on top! :D

[da89soup]

I live in Fargo and am totally up for a Supra road trip.
(stored for the winter, cry!!!)

[Chris-Supra]

Ack I hate driving a slow car. I cant wait for spring and all the large amounts of boost and traction problems I've become accustomed to. And really cant wait to get the new setup working.

[Celica Supra]

Yea snow does suck... but not when you are driving a Subaru Impreza.. :D

[Celica Supra]

Anyone know where to buy stainless steel braided lines?

[Chris-Supra]

summitracing.com is where I get mine, super fast and free shipping.

[Celica Supra]

summitracing.com is where I get mine, super fast and free shipping.

Cool! Thanks! where do you search for it?

[goldenchild7801]

i dont have a supra but i do have a 75 datsun 280z that has a 7mgte in it. Should be running soon so if theres a date for a meet i might show up

[Chris-Supra]

Anyone have a spare passenger side engine to tranny support bracket for a 7mgte/R154 (turbo 5 speed) ?

Broke it tacking the tranny out damnit...

Chris

[Celica Supra]

Anyone have a spare passenger side engine to tranny support bracket for a 7mgte/R154 (turbo 5 speed) ?

Broke it tacking the tranny out damnit...

Chris


Let me check the garage. Might have one. Forgot if it the W58 or the R154.

[Ne0z]

Hey all, good news, i may have a new mkiii in the works for this summer! prolly around mid summer... which means A: I dont have to drive my auto-x car as my daily driver and B: I'll have a supra again! i'll let everyone know how it pans out...

Details:
1988 Supra Turbo 5-spd
Grey (needs minor body work... ie: Fender and the bumper sanded and painted...)
Has a Greddy type-s and hardpiping and aftermarket intercooler

2200$... friend of mine in WI is sellin it and holdin it for me

[Ne0z]

Hey everybody... MNBeaterz.com is having a get together Saturday the 7th at New Beijing in Eden Prarie. Id like to invite you all to come on down for some good chinese food and to bullshit about cars or whatever you want!

Here is the link to the thread HERE (http://www.tonykallevig.com/forum/viewtopic.php?t=136) so check it out and come down! right now we have about 18 people showin up but would love to have more!

[Chris-Supra]

Good to here you'll have a supra again. I'm still trying to figure out where I'm going to get the money to finnish my setup...

[Apexa]

my supra's almost done.. just waiting on the turbo :icon_bigg

[Chris-Supra]

^^ Nice, reverse for me: I have my big shiny sp63 waiting and just collecting other parts to make it all work. Gah!

[Celica Supra]

Good to hear that everybody Supra is almost done. Mines is near done also. Just need a few nuts and bolts here and there. ;)

[Chris-Supra]

I need to ger rid of a clutch. Anyone need a used SPec stage 3? Good condition and a nice clutch, I really like it. But I have a feeling the '63 isn't going to get along with it very well :lol: time for a Feramic/ACT HD.

I'll hook anyone local up $150. Plenty of life left. Have pics. Held fine at ~400rwhp/400rwtq. I really need to get rid of it so I can afford the damn Feramic disk... bloody things are spendy.

[Ne0z]

my supra's almost done.. just waiting on the turbo :icon_bigg


YOU... lol... yeah, you... im gonna have to come to ur place and harass you sometime soon... once my rabbit is actually running perhaps... grrrr i hate not having a supra.... but at least my car is like 1500lbs lighter than a mkiii... which is sad, lol...

Anyways, you guys shoulda come out to that get together, we ended up with 26 people showin up!

[Celica Supra]

Anyways, you guys shoulda come out to that get together, we ended up with 26 people showin up!


What when??? Oh well the Supra can't come out anyway... But The M6 can! :naughty:

[Ne0z]

we are prolly gonna have a get together next sunday, but not as many ppl will be there cause we arent gonna be at New Beijing which is VERY popular... A: because the owner is a member of mnbeaterz and mnsc, and B: cause he has a Viper GTS that he just got... lmao

[bcg04]

sup MN, adding my subscription to this thread (already have the MN one on SF). Hi to those I already know.
Brandon

[Celica Supra]

Can believe that I spoted a Modded MkIII today before work!! Around 1:30ish on Rice and Como. It was a 90ish+ blue with some 5 spoke rims. From what I can see it has. Euro corner. Bomex front lip? RS-R cat-back. Really nice drop. :D Oh yea I think a HKS BOV?? Anyone know??

[royal91]

sounds like my old high school friend LP. He's got a blue 91 turbo. Saw a white mk3 with an evo kit. I think? couple of weeks ago.

[Ne0z]

I blew a nut all over myself and had to pull over to the side of the road to clean it all up... was on the windows and everything... real mess... Had a Maroon MKIII that was identicle to my old one... except it had a nice FMIC and made this sexy PSSHHT sound as it past me doin prolly 110mph on 35W... yeah... still sticky

[Chris-Supra]

LOL, the last mk3 I saw around here it was broke down on the side of 77... go figure.

[Celica Supra]

Feel like late March now... Since we are getting +40 degree weather almost everyday. Wouldn't be surprise if spring came early. :D

[Apexa]

turbo's in :) just working on gettng all the vacuum lines connected and my supra will be running by next weekend :)

[Celica Supra]

Cool! Can't wait till mines finish!

[Apexa]

heard the beast start today. still working on the few bugs left over. and waiting on a part i gotta get at toyota on monday.. should be up and running before the month is over!! :naughty:

[Ne0z]

ur takin me for a ride... FYI :-P lolz

[Celica Supra]

What turbo are you runnin?

[Apexa]

What turbo are you runnin?


t3/04 hybrid

[Apexa]

ur takin me for a ride... FYI :-P lolz


haha who? me? :D

[Apexa]

here's a teaser, i guess :) not very detailed.. but it's definately a sight for sore eyes for me.. haha i haven't seen my engine look like that in over a year :D

[Celica Supra]

here's a teaser, i guess :) not very detailed.. but it's definately a sight for sore eyes for me.. haha i haven't seen my engine look like that in over a year :D

Go MAFT or something. BTW I got a Lexus AFM for sale. :naughty:

[Celica Supra]

Pix down... will update.