PDA

View Full Version : SSAutoChrome mani. on an NA?

ggeiss240sx
04-10-2006, 07:35 PM
Anyone have one of these manifolds? If so will the position of the turbo on it hit the distributor? Thanks much!

-Gary
IJ.
04-10-2006, 07:37 PM
Not even close Gary!
dcrusupra
04-11-2006, 12:50 AM
Arent you supposed to put the coil packs on if u r going N/A-T?
IJ.
04-11-2006, 01:01 AM
Arent you supposed to put the coil packs on if u r going N/A-T?
Not always ;)!

http://img103.imageshack.us/img103/6571/enginebay876oa.th.jpg (http://img103.imageshack.us/my.php?image=enginebay876oa.jpg)
Fuzz420
04-11-2006, 05:22 AM
Not always ;)!

http://img103.imageshack.us/img103/6571/enginebay876oa.th.jpg (http://img103.imageshack.us/my.php?image=enginebay876oa.jpg)

nice pic, just what i need to see. Is that a stock mani, or is some kinda aftermarket.

My goal is to go na-t using ge electronics, since the distrbuter will be there is always good see what it will potentially look like
IJ.
04-11-2006, 05:53 AM
I think from memory that was on a stock manifold with an adaptor I then built my own header that put the Turbo in much the same place and after that I used an SS AC header with an adaptor that put it back there as well so no probs clearing the Dizzy!
(I did turn the last adaptor towards the cam cover quite a bit as I made my own CPS that gave me more room!)
GotToyota?
04-11-2006, 09:18 AM
Not always ;)!

http://img103.imageshack.us/img103/6571/enginebay876oa.th.jpg (http://img103.imageshack.us/my.php?image=enginebay876oa.jpg)
:love: I didn't you that you were NA-T. :yum: Can't wait to do the same, can you describe that setup?

-Matt
IJ.
04-11-2006, 09:20 AM
I think my current setup would best be described as "IJ-T" as it's not really GTE or NA-T.

I just picked the best of both camps and went from there!
s383mmber1
04-11-2006, 10:45 AM
I think my current setup would best be described as "IJ-T" as it's not really GTE or NA-T.

I just picked the best of both camps and went from there!

;)