Driftmotion (Moved from misc vendors)

[bigaaron]

Hi, I am Aaron, owner of Driftmotion. I have been working on cars for years but we started our actual company a little over a year ago. We have been selling parts and services through the forums for a long time and we have many happy customers. Customers are friends and our goal is to help you out and make you happy. We are located in Pomona, CA. Our website is www.driftmotion.com We pride ourselves on doing the job right, shipping things on time, offering great prices, and helping the Supra community in every way we can. If something is not right on an install and there is no good info about it, we spend the time to work out a solution and post pics and explainations of what we did to fix it. Our customer cars are our main source of income, and we work full time. We install what we sell. We spend time answering questions online and on the phone, our phone numbers are on the website, 7 days a week. I drive a 88 7m Supra.

[GrimJack]

Stickied! Thanks Aaron. :)

[SD2JZA70]

Aaron, can you get me a price on a turbonetics 62-1 compressor wheel? We need one to get a turbo rebuilt so we can get nates car running again. thanks

[bigaaron]

Aaron, can you get me a price on a turbonetics 62-1 compressor wheel? We need one to get a turbo rebuilt so we can get nates car running again. thanks

I'll get back to you with a price first thing Monday morning, thanks!

[rakkasan]

1jz ignition coil diagram:
http://www.driftmotion.com/driftmotionignition.bmp


When are you going to put a something together for the 1JZ coils? :icon_bigg

[MDCmotorsports]

WERD. Aaron is a good guy with good parts and great prices!

[johnathan1]

Driftmotion is AWESOME! Just look at my car...

The best customer service, and very reasonable prices, combined with quality work...these guys don't cut corners. What could be better?

[MDCmotorsports]

Driftmotion owes me a hat burger and a sack of onion rings while Im out here in LA!!!!!!!!!!!!!!!!

[bigaaron]

Driftmotion owes me a hat burger and a sack of onion rings while Im out here in LA!!!!!!!!!!!!!!!!

And a chili fries! :biglaugh:

[bigaaron]

New deal from Driftmotion!

IC piping kits!

2.25", 2.5" and 3" diameter aluminum piping kits with silicone couplers and t-bolt clamps. Comes with 8 couplers and 16 clamps! These are high quality 4 ply silicone couplers and strong stainless t-bolt clamps with 10mm nut. The aluminum tubing is thick wall with smooth mandrel bends.
2.25" ic piping kit $135 plus shipping
2.5" ic piping kit $165 plus shipping
3" ic piping kit $180 plus shipping
(plus tax in CA :( )

Also, we have great prices on couplers and elbows and have almost all size combinations available. I have a 2" to 2.5" 45* silicone elbow that will go right on the ct26 outlet. The prices are lower then ebay on these. If you don't need all the straight couplers I can give you some credit towards 45 or 90 degree silicone elbows or reducers. You can have any color coupler you want, as long as it is blue :icon_wink

Another item we offer now is silicone 3mm vacuum line (stock Toyota size) in blue or black $1.25/ft.

This is the 2.25" kit. The 2.5" and 3" are exactly the same just bigger diameter.
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/icpipingkit.jpg

[bowtiebuba]

well i think my 7m has a rod knock i was hoping it was somethin with the clutch so i took all that out and it still makes the noise, do you guys sell 7ms as just a good block and head? like no turbo, intake maifold ect. the olny reason i ask is i have all that stuff from my stock motor and i bought a big horse power freaks turbo kit, and am looking at a ron r intake.

[bigaaron]

I have a new intercooler to announce:
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSC03800.jpg
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSC03801.jpg
It's only $10 more then the smaller one ($230). It has a large bracket on the top which may fit purfect on the Supra, not too sure yet. 2.5" inlet/outlet. You would have to move the oil cooler, but the stock oil cooler basically blows goats anyways :)
You would still have the ease of routing the piping, but with a larger core for better cooling. The core is a little thinner then the spearco style (3") but obviously has a little more surface area

[bigaaron]

One more special deal for those who want to be big pimpin with the real deal:
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSC03804.jpg
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSC03805.jpg

One only at $425 shipped!
Honestly, the one I sell usually looks nicer with the fully polished endtanks but I know some people like the name brand ic's, and it does say Spearco on it :naughty:

[bluemax]

Big A
The intercooler kits have upper and lower pipes that fit stock type intercoolers? The pipes don't have beaded ends?

[bigaaron]

Big A
The intercooler kits have upper and lower pipes that fit stock type intercoolers? The pipes don't have beaded ends?

No they piping is cut-to-fit so beads on the ends would not work. With the good silicone hose and t-bolt clamps I don't forsee any problems with hoses popping off under 18-20psi. You could possibly make your own bends on the ends in a few places, you don't have to have a bead all the way around to keep them on.

[bluemax]

I wasn't worried about the beads.
What does the kit run from? Upper and Lower pipes? Replace the 3000 pipe? BOV flange?
I've got stock piping with the Spearco intercooler.

[bigaaron]

I wasn't worried about the beads.
What does the kit run from? Upper and Lower pipes? Replace the 3000 pipe? BOV flange?
I've got stock piping with the Spearco intercooler.

Well all together it would probably run about $275 for all the parts you would need to make a complete 7m ic kit from the tb to the turbo.

[bigaaron]

1JZ swap power steering pressure hoses in stock and ready to ship! $80 for the hose alone, or $100 including a new Toyota banjo bolt and copper gasket. This hose makes it easy when you are putting a 1jz or 2jz into a mk3 Supra.

[sleepersupra]

i just finished my install on the new intercooler and here is my post

http://www.supramania.com/forums/showthread.php?t=19123

[bigaaron]

Tein Flex COILOVER special!

TEIN-DST38-61SS1 for MK3 Supra

$1360 plus shipping. Tax only in CA.

[aye mate]

Is there a promotional code for SM members?

[bigaaron]

Is there a promotional code for SM members?

No, but if you were going to purchase multiple items I could possibly work out a better price depending on what you would like to order. We have a low margin on everything though. We will always consider price matching if you can find something for less.

[bigaaron]

NEW DEAL FROM DRIFTMOTION

7M AFPR kits!

The complete line kit with all the adaptors needed is $89

The Aeromotive AFPR is $138 (brand new)

The gauge is $23, liquid filled 100psi (pic coming tomorrow)

We are having our hoses custom made so I can substitute all aluminum fittings in blue or possibly red if you want for a additional charge.

Ours does not come with a j-pipe blockoff but it's $50 less then our competitors and the j-pipe does not have to be removed. A bracket for the afpr will be included.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF3479.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3479.jpg)

1JZ AFPR kit will be next! LMK if you are interested!

[shaeff]

aaron, that's a wicked good deal! props to driftmotion for coming through for the mk3! and for those of you who are concerned about the J-tube blockoff plate, either A) grind it off yourself and just use the existing plate, which is what i did, or B) order one from a small block chevy (i think) from summit racing for under $5.00. ;)

-shaeff

[bigaaron]

aaron, that's a wicked good deal! props to driftmotion for coming through for the mk3! and for those of you who are concerned about the J-tube blockoff plate, either A) grind it off yourself and just use the existing plate, which is what i did, or B) order one from a small block chevy (i think) from summit racing for under $5.00. ;)

-shaeff

Hey thanks! If I can get those from Summit then I could order them and add them to the kit for whatever they cost.

[Selz202]

Here ya go... SUM-402035

http://store.summitracing.com/partdetail.asp?part=SUM%2D402035&FROM=MG

[bigaaron]

Ahhhhhhhhhhhhh yeah! You the man!

[SuprA70]

Aaron, I'm interested in the kit as well as getting other work done. Let me know when your schedule opens up.

[bigaaron]

Aaron, I'm interested in the kit as well as getting other work done. Let me know when your schedule opens up.

No problem Mike! We are moving into the new shop next week! I'll give you a call before then.

[figgie]

Bigaaron

just an FYI

any of the block off plates for a small block or big block chevy or ford will work as long as they are the two bolt one. The billet stuff is nice but pricey for a block off plate :)

[bigaaron]

Bigaaron

just an FYI

any of the block off plates for a small block or big block chevy or ford will work as long as they are the two bolt one. The billet stuff is nice but pricey for a block off plate :)

Thanks for the good info! :icon_bigg

[bluemax]

BigA,
I assume you've put some of these fuel upgrades on the sups you built?
Is there any problems on passing Cal smog that you've heard about?

[bigaaron]

Everything we sell and install is for off-road use only in CA, and not for use on polution controlled vehicles yada yada yada....... :icon_wink

[nosechunks]

are the bigger spearco style intercoolers still available? i went to the website and didnt see them, thats why i ask.

[bigaaron]

are the bigger spearco style intercoolers still available? i went to the website and didnt see them, thats why i ask.

Yes, they are available, I will add it to the site tonight! We need to add a bunch of things to the site actually.

[SupraManiac]

the 7/16 exaust studs are badass man thanks for the great product...i just seen your intercooler and piping setup for sell...thinking about getting it pretty soon

[bigaaron]

the 7/16 exaust studs are badass man thanks for the great product...i just seen your intercooler and piping setup for sell...thinking about getting it pretty soon

Thanks!

[nosechunks]

sweet, im getting that bigger spearco when the time is right.

[bigaaron]

http://i25.photobucket.com/albums/c54/tony77642/Supramaniac.jpg

Your car looks so freakin nice, I wish mine looked that good in person!

[bigaaron]

sweet, im getting that bigger spearco when the time is right.

It's ready when you are :icon_wink :icon_bigg

[SupraManiac]

http://i25.photobucket.com/albums/c54/tony77642/Supramaniac.jpg

Your car looks so freakin nice, I wish mine looked that good in person!

thanks alot! i wish my motor can look like yours!

[bigaaron]

thanks alot! i wish my motor can look like yours!

We could build one totally sweet one out of both?!? :biglaugh:

[bigaaron]

New deal from Driftmotion!

Split loom, LOTS of split loom.

This is the good stuff. High temp automotive grade. Tough and durable.
I have 1" i.d. and 1.25" i.d. now, and I will pick up a box of 1.5" i.d. this week too! I am going to include a roll of 3M electrical tape with every sale. Also included will be zip ties that push into the holes on the firewall! The 1" is $.70 a foot, the 1.25" is $1.00 a foot, and the 1.5" is $1.50 a foot. There will be a 8ft combined minimum order, and at 20ft I will throw in another free roll of tape. Shipping will be $9.50 flat rate for USPS Priority Mail 2-3 day shipping with tracking number, shipped anywhere in the US. This deal is only for customers in the US. Paypal fees are included in the shipping. You don't have to wait for a GB, I have it now.

If you have an engine swap going on, have one done already, or have an old harness that you want to make look new again, this will be a great deal for you!

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3515.jpg
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3503.jpg
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3519.jpg
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3514.jpg
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3520.jpg

[OneJoeZee]

A clean harness running across the firewall really does wonders for the engine bay. :D

[johnathan1]

I think I'll want some when I get back from my little "trip"...!

[figgie]

BigAaron

got the studs installed and they are great

even on an after market manifold!

7/16 torque down easily to 30 lbs. I could have done 40 but decided to stick with stock #'s :)

[bigaaron]

BigAaron

got the studs installed and they are great

even on an after market manifold!

7/16 torque down easily to 30 lbs. I could have done 40 but decided to stick with stock #'s :)

Awesome!!! Thanks! Any pics? They sure feel a whole lot more solid when you torque them down, huh? The stock ones always feel like they are on the verge of stripping at the stock torque spec.

[figgie]

Awesome!!! Thanks! Any pics? They sure feel a whole lot more solid when you torque them down, huh? The stock ones always feel like they are on the verge of stripping at the stock torque spec.

ooh yeah :)

lots more solid.

I could get pics tonight :)

[bigaaron]

JUST ADDED TO THE WEBSITE

Clevite77 complete bearing sets for 7m $125

HKS 2.0mm STOPPER mhg $325

[bigaaron]

I have been asked a few times: "why don't you have more stuff on your website?"

The reason for that is we don't list things for sale we can't get within a few days, and if it is something that is special order, we say so. We will call you even if your item will be delayed a few days. Many major websites list many things that will take several weeks, or months for them to get, and they know this in advance, but you don't usually know until you pay for it. Of course there are items that can be back ordered, but we don't bill your credit card until we have the item ready to ship. You can cancel if there will be an extra wait time, and you will not be billed at all.

Just thought I should explain that.

[jdmk3_87t]

^^Well written...Thanks for letting us know aaron!

[IJ.]

I can vouch for Driftmotion's policy on special order parts!

If it can be found Aaron and the boys will make it happen ASAP!

[SupraManiac]

aaron...ya only have blue couplins for the intercooler piping? any chance ya can get red?

[yankiwi]

Thanks Aaron, just got my Intercooler.
Buy from this guy, no hassle, good packaging and fast shipping!!!

I need some silicone couplers and then it is install time:biglaugh:

Driftmotion FTW!!!

[Big Wang Bandit]

So when can I get a 7m-gte built by you guys and put in my car :love: :biglaugh:

It may be a reality one day.... 18th birthday sooooon

[bigaaron]

aaron...ya only have blue couplins for the intercooler piping? any chance ya can get red?

I could get red but not at the low pricing that I get the blue silicone :cry:

Red paint maybe? :biglaugh:

[SupraManiac]

I could get red but not at the low pricing that I get the blue silicone :cry:

Red paint maybe? :biglaugh:

how much more for the 2.5 piping with red? planning to get the big spearco style intercooler too. so just trying to figure out the total. but the red paint might work....for only a few days:icon_bigg

[bigaaron]

how much more for the 2.5 piping with red? planning to get the big spearco style intercooler too. so just trying to figure out the total. but the red paint might work....for only a few days:icon_bigg

I can special order Samco or Turbonetics hoses if you tell me exactly what you want.

[SupraManiac]

either will work...i know i need some 90 elbows couplin and a few reg ones and the piping set and the intercooler...


if you would recommend anything else LMK

whats the total for everything

[bigaaron]

New stuff!

1JZ manifold and 46mm wastegate!
Manifolds in stock $280 plus shipping.
Wastegate $150 plus shipping.
Buy both and get free shipping! (to us only)

(dump tube will need to be modified)

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF3680.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3680.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF3684.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3684.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF3686.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3686.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF3687.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3687.jpg)

[SupraManiac]

nice...now lets see it for the 7MGTE

[bigaaron]

nice...now lets see it for the 7MGTE

$175 for 7m-gte
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/0.jpg

[supramike7m]

hey ive been looking at the 1jz swap for a while, but how much would it be to ship a clip to Arizona, 86301? i know you have done swaps before, so what else do i need to get it in my car and running, and how much for the other parts i need? thanks

Mike

[supramike7m]

i did some searching, and know more of what i will need. bell housing, flywheel, extend my harness, etc. would you be able to get me all the parts i need? how much for the clip and everything else i will need shipped to Arizona, 86301? thanks

Mike

[bigaaron]

i did some searching, and know more of what i will need. bell housing, flywheel, extend my harness, etc. would you be able to get me all the parts i need? how much for the clip and everything else i will need shipped to Arizona, 86301? thanks

Mike

PM sent!

[bigaaron]

These are a high quality replacement for your old tired leaking ps hose. We braize on AN fittings with the best high silver content stuff, and the hose is rated for 2000psi working pressure.

I need to do this on an exchange basis, I would need the banjo fittings back from you when you purchase one. It will be $75 shipped with exchange, and $100 shipped without exchange (limited availability).

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3877.jpg

[bigaaron]

Many people are running their 1jz mk3 with no oil pressure gauge. This is because the 7m sender will not fit behind the ac pump on the 1jz. We came up with this and use it on our 1jz swaps. Just screw it into the block, screw the 7m oil pressure sender into it. Hook the wire that was for the 1jz oil pressure switch to the 7m sender and you are done. $25 shipped anywhere in the US.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3878.jpg

[OneJoeZee]

^I think I'm in need of both of those...

[bigaaron]

^I think I'm in need of both of those...

I got you covered homie! LMK

[Big Wang Bandit]

When I come to LA(god knows when......) I want thoes PS lines! Lets insall em there too.... +rep 4 life =P

[Brewster]

Many people are running their 1jz mk3 with no oil pressure gauge. This is because the 7m sender will not fit behind the ac pump on the 1jz. We came up with this and use it on our 1jz swaps. Just screw it into the block, screw the 7m oil pressure sender into it. Hook the wire that was for the 1jz oil pressure switch to the 7m sender and you are done. $25 shipped anywhere in the US.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF3878.jpg

I want that. How do I pay?

[mattjk]

I have the oil sender hose. Works great!

[bigaaron]

I want that. How do I pay?

I added it to the website under 1jz parts last night, or you can paypal aaron@driftmotion.com

[Brewster]

New deal from Driftmotion!

IC piping kits!

2.25", 2.5" and 3" diameter aluminum piping kits with silicone couplers and t-bolt clamps. Comes with 8 couplers and 16 clamps! These are high quality 4 ply silicone couplers and strong stainless t-bolt clamps with 10mm nut. The aluminum tubing is thick wall with smooth mandrel bends.
2.25" ic piping kit $135 plus shipping
2.5" ic piping kit $165 plus shipping
3" ic piping kit $180 plus shipping
(plus tax in CA :( )

Also, we have great prices on couplers and elbows and have almost all size combinations available. I have a 2" to 2.5" 45* silicone elbow that will go right on the ct26 outlet. The prices are lower then ebay on these. If you don't need all the straight couplers I can give you some credit towards 45 or 90 degree silicone elbows or reducers. You can have any color coupler you want, as long as it is blue :icon_wink

Another item we offer now is silicone 3mm vacuum line (stock Toyota size) in blue or black $1.25/ft.

This is the 2.25" kit. The 2.5" and 3" are exactly the same just bigger diameter.
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/icpipingkit.jpg


Can you make an IC hardpipe kit for the 1JZ with a similar to stock IC? These are just pipes that you cut to fit right?

[bigaaron]

Can you make an IC hardpipe kit for the 1JZ with a similar to stock IC? These are just pipes that you cut to fit right?

Sure, we have made that kit up for 7m, 1jz, and 2jz swaps with stock and upgraded intercoolers. For 1jz you need an additional 90deg reducer elbow and a 45deg elbow.

[Brewster]

I'll shoot you a PM tonight, I want to make sure the IC I have is as close to stock fitment as I thought it was so I get the correct pipes. I have to go to work for now though, I'll be back around midnight..

[Brewster]

Got it today, thanks.

Looks like it's going to take a little more work to get it on there than I thought, lotta crap in the way. :)

[T34418L3ONE]

how much for a intercooler kit for a 2j swap?

[bigaaron]

how much for a intercooler kit for a 2j swap?

It would be around $450 with all the elbows and couplers needed and the intercooler itself.

[Kyle87T]

Thats a great deal!

[bigaaron]

All the flavors available for HKS, Greddy, Tial, and Turbo XS bov's. For 2.5" pipe. I do have reducers available for 2" or 2.25" pipe also.
Your choice $22.50ea. plus $9.50 shipping priority mail with tracking (2 days to most of the us). For Canada add $100 shipping. :biglaugh:
Please add 3% for paypal to aaron@driftmotion.com. Please specify which one you want in the paypal also.Thank you!

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4009.jpg

Buy it with a blow off valve and get FREE shipping!!!!

I can do the the Tial 50mm copy with the adaptor pipe for $125 shipped.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4012.jpg

Greddy type RS copy (it is exactly the same as Greddy) with adaptor pipe $105 shipped.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4014.jpg

HKS SSQV copy with adaptor pipe $105 shipped.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4013.jpg

Gaskets and hardware included with bov, but not if adaptor pipe purchased on it's own.

[Jaguar_5]

Is the Tial copy good?
Should i just save up and get the real deal (do you offer that too?)

btw your 7/16" kit is great, I was scared at first to drill into my head, but it was easy! Wondering if i should pick up some locking washers for it though?

[bigaaron]

Is the Tial copy good?
Should i just save up and get the real deal (do you offer that too?)

btw your 7/16" kit is great, I was scared at first to drill into my head, but it was easy! Wondering if i should pick up some locking washers for it though?

I run a Tial copy on my car, and I love it. I can get the real Tial though, I will check tomorrow.

I'm glad you like the stud kit! It's pretty easy to do, just be sure to drill straight and keep it square at 90 deg from the surface.
The nuts are lock nuts already. The lock washers would probably not lock properly on the cast manifold anyway.

[bigaaron]

Just another day at Driftmotion:
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF4064.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4064.jpg)


Took some engines over to our machine shop, and I took a few pics for anyone who might be interested in what equipment is used for our builds. The surfacing machine alone retails for around $100,000! There is no shop using better equipment to build a 7m.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF4073.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4073.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF4072.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4072.jpg)
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/th_DSCF4074.jpg (http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4074.jpg)

[Dilsky]

Fancy unit ya got there. If only i wasn't so far north.

[Big Wang Bandit]

Ide bring my 7m down... Wanna build a mostly stock 300 horse 7m? hahaha

[bigaaron]

Ide bring my 7m down... Wanna build a mostly stock 300 horse 7m? hahaha

:biglaugh: To tell you the truth, we do basically the same machine work on a 300hp engine as we do on a 500+hp engine. The difference is in the upgraded parts like pistons and rods etc....

[OneJArpus]

Aaron how about a job with you guys? You guys are the best, i can't wait to finialize my deal with you guys for a clip + goodies.

[bigaaron]

Full standalone with 3 bar map built in and direct input for Bosch widband sensor for $950.
Free shipping in the US for the next two weeks!

Free intercooler (up to $180 value) to our first MK3 customer to get it installed and running!!! (must show video proof ;))
There are base maps available for 1jz, 2jz AND 7m-gte!

We are a new distributor for the EMS standalones.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4204.jpg

Available now.

Advanced Design
One ECU fits all. Just like the 8860. There is no need to send your ECU back for re-programming when you want to fit it to a different engine. The same ECU can be re-programmed by the user to suit almost any engine.

EMS has lead the way in user-friendly ECU management software. Our Windows software is developed by professional software developers who have experience in engine tuning and advanced Windows programming. This becomes evident when you tune any of our systems.
Download latest software

Key Features
4 User Definable outputs can programmed as PWM or digital. These can be used for controlling thermo fans, Idle controls, variable cams, fuel pumps, Boost Control, Variable water spray, etc.

Connects to most sensors. This means that you can use your existing sensors with the Stinger.

Adjustable RPM and load points. The Stinger 4 offers 40 RPM points with a 1 RPM resolution and 21 load points with a 0.1 percent resolution. This provides a tuning grid of 840 points. Of course you don't have to use this many. You can define any number of RPM and Load positions you require to tune with. This provides non compromised tuning ability. The advanced micro code will perform a 3 dimensional interpolation between all load points.

Advanced trigger circuitry. Automatically filters trigger inputs for noise ensuring that the trigger signal is always 100% accurate. This combined with the advanced auto signal tracking and true zero crossing detection with magnetic sensors always provides accurate timing at all engine speeds.

Advanced Micro Code EMS have put great effort in programming their micro code to ensure it stays in exact synchronization with the engine. This minimizes the risk of misfired and lean strokes therefore increasing engine life and providing more power. The system also performs a 3 dimensional interpolation between load points to ensure that your engine is getting what you tuned it to receive.

Spec sheet PDF:
http://www.fuel-injection.com/ECU%20Specifications_files/ECU%20Specifications.pdf

[bigaaron]

Aaron how about a job with you guys? You guys are the best, i can't wait to finialize my deal with you guys for a clip + goodies.

It's a thankless job with long hours and low pay with no benifits. :biglaugh:
hahaahha jk

[OneJArpus]

It's a thankless job with long hours and low pay with no benifits. :biglaugh:
hahaahha jk

sounds good to me. Doesn't differ from my current job. Besides me working on cars instead of sitting in front of a computer :)

[bigaaron]

sounds good to me. Doesn't differ from my current job. Besides me working on cars instead of sitting in front of a computer :)

It's also quite a commute from Newark :biglaugh:
We actually have two Aaron's in the shop a few days a week now, Aaron (#2) is helping out because we have been trying to grow this little business and we need 6 hands sometimes at this point.

[Tim]

Hey Aaron,
My name is Tim and I gave you guys a call a few days ago. I have the 88 turbo supra with the rod knock. I am definatly sending my motor to you guys to build up. The motor will be out sometime within a couple of weeks so I can inspect it and find out what happend. I am glad I live locally to you guys because I hear your shop is badass. Looking for something that can handle my sp58gt.

[bigaaron]

Hey Aaron,
My name is Tim and I gave you guys a call a few days ago. I have the 88 turbo supra with the rod knock. I am definatly sending my motor to you guys to build up. The motor will be out sometime within a couple of weeks so I can inspect it and find out what happend. I am glad I live locally to you guys because I hear your shop is badass. Looking for something that can handle my sp58gt.

You got it man, thanks! Come on by when you get that engine out, or stop by just to say hi!

[SuprA70]

Do I get the IC if you guys do the install?

:biglaugh:

[bigaaron]

We have the prototype done, and it was installed on Jose's car last night. The next one is going to be shipped out to Rakassan on Fri. We are having the main part of the piping made from 3/8" stainless tubing. The return line is going to be fuel hose instead of braided. That is because the return line is low pressure and braided is not needed, but it also keeps the cost down. The kit will include the Aeromotive AFPR, the bracket and screws for the AFPR to mount to the firewall, strain relief clips to mount to the valve cover bolts, fuel line for the return, and all the necessary fittings. The kit will be $260, plus paypal fee and $10 shipping 2-3 day in the US, $20 shipping FedEx ground to Canada.



You can choose black with black face pressure gauge, or chrome with black face.

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4231.jpg

http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4236.jpg

[bigaaron]

Do I get the IC if you guys do the install?

:biglaugh:

Sorry, you just get the high quality install at our everyday low prices :biglaugh: I'll buy you lunch and a Thai tea boba!

[lilazni3uoy]

thanks aaron! i got it today

http://img92.imageshack.us/img92/8804/img2978pg4.jpg (http://imageshack.us)

was just working on the car so why not take a picture of it :biglaugh:

[Big Wang Bandit]

Aaron is fun to talk to. He must of been at a party. Sexing it up

[bigaaron]

thanks aaron! i got it today

http://img92.imageshack.us/img92/8804/img2978pg4.jpg (http://imageshack.us)

was just working on the car so why not take a picture of it :biglaugh:

I am so happy about seeing that, because I talked to the post office today and they said they had no idea where it was! The tracking info never got past "acceptance".

[lilazni3uoy]

I am so happy about seeing that, because I talked to the post office today and they said they had no idea where it was! The tracking info never got past "acceptance".


it made it to the doors of jaws ! haha thanks man for a great quality part, i can't wait to hook it up to the block! thanks guys, @ driftmotion!

[bowtiebuba]

hay aron what happen to the ss throttle cable setup u had for the 7ms? it got rid of all the over the cam cover bull shit and was put into a nice neat line do you still have pics and the kit?

[bigaaron]

hay aron what happen to the ss throttle cable setup u had for the 7ms? it got rid of all the over the cam cover bull shit and was put into a nice neat line do you still have pics and the kit?

That is just a deal from Auto Zone for $25. You just need to get a little creative with the bracket for it and the connections on the ends.

[bowtiebuba]

do you have any pics?

[johnathan1]

Yea, any pics? And does it allow you to use cruise still?

[Big Wang Bandit]

Ill be down at DM pretty soon. Gonna get some stuff installed if all go to plan...

[johnathan1]

Hells: (Sorry to got OT) What are you having installed?

[Big Wang Bandit]

there is this homoblue car with some wierd ass engine i may pick up :bigthumb:

It needs more BOV and new turbos

[johnathan1]

No way! :aigo:

[bigaaron]

do you have any pics?

http://img.photobucket.com/albums/v379/BigAaron/supra%20upgrades/DSCF4294.jpg

[Big Wang Bandit]

:icon_bigg

If all goes according to plan

[johnathan1]

That's a JDM throttle body, right?

[bigaaron]

I believe so, I modded the part where the cable attaches to the throttle body by drilling out the origional ball fitting and making a notch so the cable does not bind up.

[bowtiebuba]

hmm thats a very cool setup, ive never looked but what can a guy do to get a bigger throttle body for the 7m with out going to a ffim?

[bigaaron]

hmm thats a very cool setup, ive never looked but what can a guy do to get a bigger throttle body for the 7m with out going to a ffim?

To be honest, the stock throttle body flows plenty for the stock intake manifold. On a turbocharged engine the throttle body upgrade isn't going to help much unless you are making big hp numbers.

[Big Wang Bandit]

How much would it cost for you to get the Blitz SS BOV and a pipe for the 1j off the TB?. I may bank for one of thoes when I coem down

[mattjk]

Aaron, can you get those BOV adapter pipes cast so it replaces the TB elbow?

[Big Wang Bandit]

Joe had one... He sold it thom caus hes a bum

[Big Wang Bandit]

Joe said he got his on ebay. Hey Aaron, Make a GB for Matt and I! Ill supply a blitz bov possibly lol

[mattjk]

actually, they would probably fit both jza70 and jza80. Definately a good money making idea there.

[Big Wang Bandit]

tada! And then source my a Blitz BOV and you got yourself some $$$$$$$

[Big Wang Bandit]

Meh.


How would the Tial preform on a stock 1j?

[bigaaron]

Meh.
How would the Tial preform on a stock 1j?

Like tits on a boar! :biglaugh:

I'm only offering the adaptor pipes, and the flanges to have someone make you the pipe you want. You guys make them and I'll put them on the website for you :icon_wink

[Big Wang Bandit]

I must be too young to understand that lol.

You got the tial BOV's tho... maybe Ill steal one while im there! :bigthumb:

[Yellow 13]

I'll bring the duffel bag.

[Big Wang Bandit]

Woot! Tials for everyone!

[bigaaron]

Tits on a boar are useless. LOL It's an old saying.
The HKSS Type II would be the best for the stock spot because it already has the hose inlet.

[Yellow 13]

Tits on a boar are useless. LOL It's an old saying.
The HKSS Type II would be the best for the stock spot because it already has the hose inlet.

Would these require a bigger duffle bag than the Tials?

[Big Wang Bandit]

Function over form......

HKS annoys me. Yor the master. Im sure ill figure somthing ont one of the days im down there

[bigaaron]

Would these require a bigger duffle bag than the Tials?

No, they are "smaller then a breadbox" (another old saying :biglaugh:)

[Big Wang Bandit]

^ I know that one! Ass!


The Tials are huge lol

[bigaaron]

A word to the wise is sufficient. :)

[lilazni3uoy]

waiting for new products aaron!!! j/k the oil pressure sensor adaptor works great! like a charm!!! thanks!

[bigaaron]

waiting for new products aaron!!! j/k the oil pressure sensor adaptor works great! like a charm!!! thanks!

Awesome!

1jz downpipes and 1jz ct26 manifold in the works along with plug and pray engine harnesses for standalone on 7m and 1jz!

[thedarcsage]

Hey just wanted to leave good feedback regarding the purchase of the R154 transmission. Thanks again! I may be inquiring about more parts soon too

[bigaaron]

Thanks so much!

[SuprA70]

... along with plug and pray engine harnesses for standalone on 7m and 1jz!

:naughty: :biglaugh:

[suprahero]

What's up, my 1JayZ expert? Should I use the stock bov on my 1jz or should I go with something else?

[OneJoeZee]

What's up, my 1JayZ expert? Should I use the stock bov on my 1jz or should I go with something else?

aren't you going single, my caucasian brother?

[suprahero]

As a matter of fact I am my barely darker than I in the summer time brother. Will that make a difference? What do you suggest?

[OneJoeZee]

The stock BOV wouldn't work withough the wierd flange it uses on the stock pipe.

Plus I'm sure if you were going single, you'd want to use a better BOV anyway.

[bigaaron]

I GOT ELBOWS! thank god...
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/DSCF4432.jpg

We have a new distributor for silicone hose too! You want black? I got it. Right now it will be possibly 4-5 days extra for black, but I will build an inventory and stock them if they sell well.

[bigaaron]

I have 2.75" polished aluminum piping kits now too!!! Pics and prices soon!

[mattjk]

Hey Aaron, do you have a silicone elbow to replace the rubber elbow on my intake pipe?

[bigaaron]

Hey Aaron, do you have a silicone elbow to replace the rubber elbow on my intake pipe?

Yes, you could use the black elbow and cut it at the correct angle. It's not under pressure though :dunno:

[mattjk]

I just want to buy something. SomethinG!

[jdmk3_87t]

I just want to buy something. SomethinG!

Save your money for a 1j...its better. :biglaugh:

[bigaaron]

I just want to buy something. SomethinG!
No problem, bring it on by! It will look a little better.

[suprahero]

I need a coupling that will fit the stock ct26 to your 2.5" piping. Thanks, Jay

I guess it would be a reducer. I don't remember the size of the ct26 outlet. I think it's either 2" or 2.25".....................:dunno:

[bigaaron]

I have those in stock

[mattjk]

I can't wait until the Driftmotion 1jz downpipe is available!

:bling:

[mattjk]

Aaron, I'd like to see you guys make a hard pipe kit for the stock 1jz intercooler setup. I'd buy one.

[Supracentral]

Driftmotion now has an official vendor section located here:

http://www.supramania.com/forums/forumdisplay.php?f=97