PDA

View Full Version : Help


mattsplat72
03-20-2006, 04:47 PM
Hey everyone I screwed up .:cry: :1zhelp: I got rod knock 92 n/a cutting cookies in a parking lot busting a 240s balls need to do a swap now need from you guys ..... info like inporters, wrecking yards, parts cars any help would be greatly appericated found a motor at nix 99 with 31k for 3250.00 and one with 121k for 1975.00 both with out a ecu they want 290.00 for thatkind think that is steep but i really dont know know of a car with 161k and a bhg for 1800.00 but then i have to del with the scraps and i live in an apt so you can see my problem totally bummed but the org. motor lasted to 215k and is tech still running lol would just get rid of it but its a 92 so ..... fuck that hehe thanks guys you rule

MDCmotorsports
03-20-2006, 05:07 PM
Jarcoinc.com

mattsplat72
03-21-2006, 04:30 PM
not much there but thanks

IJ.
03-21-2006, 04:32 PM
+1 qt oil in the next motor ;)

lowbudgettarga
03-22-2006, 01:53 AM
Hey, I met you at best buy the other day, i had the burgandy 91. I did hear just the smallest bit of knock for the smallest part of a second when you were revving it up, but still, 200+k is a pretty long time. You should try to find someone with a shop or garage that will let you build an engine there for a while. It'll be alot cheaper and I gurantee you'll learn alot more about your car that way. Anyhow, I think I'm gonna come down to burlington again this weekend, I got some new things on the car now.

SnowMongoose
03-22-2006, 03:42 AM
I got some new things on the car now.

You arrogant bastard.
lol

crf_rider
03-22-2006, 10:57 AM
Aaron @ www.rabidchimp.com can get you a JDM motor. He's in Tacoma.

EDIT with more info for ya...
He offers slightly reworked JDM 7mgtes, with metal head gaskets, arp head studs, new water pump, timing belt, etc... you can check it out here: http://www.rabidchimp.com/mk2sup_rcp_jdm7mgte.htm
Also, all of the parts that were attached to the head get hot tanked.

mattsplat72
03-22-2006, 06:34 PM
sweet crf that guy has got the best deal so far i like the fact that the motor is prepped for a decent start of higher then stock hp numbers , as it sits i drove the car a few more times and now it sits at the house still runs fine except for some valve train noise at 2700 and up sort of heard a low thrum the other day but fuck it i guess it is just time now i am just try to figure out if i want to get a D.D. and just build till june or invest now and just drive????? fuckin supra....... love that fat pig...as far as best buy i should be their on fri around 1145 to midnight gonna run? give you some gas money to show me how fast a good running sup goes lol

MDCmotorsports
03-22-2006, 06:38 PM
not much there but thanks

Not much at Jarco huh? You need to call them and ask them how much a JDM 7mgte is, with harness and cpu.

crf_rider
03-22-2006, 10:55 PM
should be their on fri around 1145 to midnight gonna run? give you some gas money to show me how fast a good running sup goes lol


My car is getting a megasquirt install and I am having the 3.5" cat back welded up on sunday so it is on jack stands. It isnt very fast right now.

:biglaugh:

lowbudgettarga
03-23-2006, 01:46 AM
I"ll be there as long as the maftpro I just put in isn't giving me troubles, I havne't got to start it because the tranny is still on the floor. Jason (87_7mgte) is gonna come down too probably with his megasquirted '90.

mattsplat72
03-24-2006, 03:08 PM
has any one used rabidchimp before are they a good shop man this blows i am stuck driveing a 92 auto prelude girls car

crf_rider
03-24-2006, 03:58 PM
I have purchased Thousands of dollrs in parts and labor from him in the last 3 years. 2 intercooler kits, cat back, oil lines, all kinds of stuff. Never a JDM engine though. Aaron is a great guy and has done tons of work for the supra community. He stands behind his products.

mattsplat72
03-24-2006, 09:02 PM
cool i figured as much i did recently find a complete 1j with 5 spd ecu harness ect for 1800.00 minus shipping from alberta i belive man the way it is going i am gonna be down till july lame ......

Mr.SelfDestruct
03-26-2006, 12:51 AM
drive it 'till theres a hole in the side like I did. lol.

mattsplat72
03-27-2006, 03:52 PM
has anyone done a NA-T swap ? any web links for that ? or a complete 1j swap have as i figure it three options to choose from a 7mge boosted a 7mgte and a 1j factors are money, time down, part support, and reliablity, i really want to get my car up but i want to use this to my best advantage . just shut her down for the long term cleaned out battery out dehumidifier bags and tarped was kinda sad.....

Cravin Boost
03-27-2006, 09:24 PM
well I will tell you what little I know

1Jswap is approx 5K give or take
you can buy a pretty much built 7mGTE for about 2K and Im guessing that there is another 1 to 2 K in parts needed to go NA to Turbo.

I am in process of getting a JDM longblock and haveing it put in to replace my current 7mgte ( I had a metal hg put in and uncovered other problems)I know its not much and maybe others can enlightem more on the costs.

mattsplat72
03-28-2006, 03:09 AM
really a 1j swap costs that much i found one with a tranny,ecu,and a harness other then that i would need to get a r154 drive shaft,oil cooler,intercooler and extend my w/h three feet and get a oil\ re location kit for the complete 1j it was 1800.00 minus shipping am i missing other steps? i know that i would most likely need the same stuff to do the 7mgte swap in addition to need ing the ecu and harness but not the tranny w58 fits what steps am i missing?

mattsplat72
07-18-2006, 04:38 PM
Ok well just an update . A thank you to all the people that took time to post responses to my posts. My motor is on the way. I am getting a jdm 7mgte, Act clutch and pressure plate ,Megan Racing down pipe, Walbro fuel pump,Apexi Safc2 reinstalled ,and a stock intercooler set up due to lack of funds. So I hope to see all of you on the road soon......maybe behind me

88supraFAST1
08-03-2006, 12:57 AM
just to let you know you wont be infront of me. that is when my car gets done.

mattsplat72
08-03-2006, 01:38 AM
Hmm not really sure if that is a good thing to say ..... Gonna mess up a little are we??? maybe a little boost leak ??......lol guess you aren't gonna build me up to be faster then you right maybe close but never faster hahaha

88supraFAST1
08-03-2006, 02:22 AM
Hmm not really sure if that is a good thing to say ..... Gonna mess up a little are we??? maybe a little boost leak ??......lol guess you aren't gonna build me up to be faster then you right maybe close but never faster hahaha
naww man i will build what ever you bring me to what ever you want it to be thats my job. im just pitchin you some bs lol:icon_razz