Progress Pics of my Project

[Suprastic]

I've been a bit busy, but here's some pics of my project Below is a list of things Ive done and that is coming soon.

Interior:

-Suede headliner, A-pillars, and rear window pieces
-Carbon Fiber radio surround, switch bezel, gauge bezel, door pulls
-Dyed dash, door panels, etc to dark neutral (not black, but more like shadow grey)
-New dark graphite carpet
-CC LED bulb change (red indicators and hyper white buttons)
-All other curtosy lights and dash bulbs changed to hyper white and red
-Montana Red leather seats (same as BMW 6-series) w/smoke stitching
-Misc pieces painted to brushed aluminum
-5.25" component speakers up front
-5x7" speakers in the rear
-center channel speaker
-8" Kicker solobaric mounted to still put targa in the trunk
-Pioneer Avic N-1 with GPS
-5.1 dolby digital DTS

Exterior:

-Full 89+ conversion w/ 3 pce spoiler
-ShineAuto front lip
-35% tint
-ADR M-Sport wheels (staggered) 245's & 285's
-ST sway bars
-Eibach springs
-KYB AGX adj. struts
-Tanabe hyper medallion exhaust
-X-drilled Brembo's with Axxis pads
-New Paint (Crystal White)

The list goes on. LMK what you think, im open to opinions

[Suprastic]

...and more

[Bigzavs]

is that all dynamat inside the car??

or am i seeing things, cuz i wouldnt put that past me right now

[Suprastic]

yeah, you bet

here's a few more

[Suprastic]

Damn, I wish I was able to host pics

... and more

[Suprastic]

ok, so here is some of the things installed and test fitted

[jimi87-t]

Lookin good man

[Reign_Maker]

Lookin good... I like the carbon fiber door handles, thats going to look great in there...

[7M-GTE]

looks awesome man... I hope to be able to go that in depth some day with my supra or another...

[Suprastic]

^^^ yeah, it started out as just a few things I wanted to change, the next thing I knew I was taking out the entire interior and changing everything. Iv payed a lot of attention to small details such as making my dome lamp buttons look like brushed aluminum, and making sure the car has a quieter interior than it ever did. Then I thought I'd take advantage of the 5.1 DTS deck I have, so I bought a center channel speaker. A lot the thoughts came from high end luxury cars, that i decided I could incorporate in to the supra

[dcrusupra]

What is the purpose of the dynamat and how much you pay for it?

[Bigzavs]

sound insulation and sound deadening im pretty sure is what dynamat is for , and damn that must of cost you a good amount for that much of it

lookin good man

[dcrusupra]

Ok well thats what i need. How much money was it to get all of that?

[Suprastic]

What is the purpose of the dynamat and how much you pay for it?


Its a sound deadener and basically reduced road noise and any rattles you may notice when you close your door. Doing the entire car will bring back that new car feeling. To ensure I didn't get any rattles from that may not be cureable with the dynamat, I mounted thin foam stips around the edges and clips of parts that may rub together. It an old car and I don't expect it to be perfect, but im trying as much as I can to make it. I bought it from www.b-quiet.com and paid ~$220 for 100sq. ft. That was enough to lay the entire car from bottom up, double up on the trans tunnel, and I fell just short of completing the roof by about 2 sq.ft.

[dcrusupra]

How does it get applied?

[MKivSupra_Rob]

wow, very nice, i cant wait to see this in person!

[Suprastic]

How does it get applied?


It just sticks on with a tar like backing, and then you use a roller tool to allow it to form to the contours. It very easy, but time consuming. You have to work inch by inch with 1sq. ft. pieces.

[Ckanderson]

yes its Slow but worth it 10 times over.. you will be AMAZED how much better doors will sound when they close

[Suprastic]

CK: they already sound better, and I don;t even have the interior put together