7mgte stock intercooler pipe

[daneyan]

hey guys i just thought i'd post this here first before i post in the wanted section cause i need this part asap. i'm looking for the stock 7mgte intercooler pipe that comes from the turbo down. i don't need the metal elbow, just that rubber hose. mine just busted and i need this hose by today or monday of this week. if ne one in the south florida area has one let me know, as pick up is preferred. willing to trade a ct26 that needs rebuilding for a full stock ic hose kit. thank u.

[Supra60-1]

Hey man, go to an exhaust shop and they can make that pipe for next to nothing. When that hose busted on my car, I took the rubber hose to an exhaust shop and got them to pick out a suitable diameter of pipe and he bent it to match the shape of the rubber pipe. I didnt even take the car up there. Get them to make it a little too long so you can trim it on a bench grinder. I then cut up the old hose to make couplers, got two more hose clamps to use on each end, and put it on my car after hand trimming it with my grinder. Total cost was, free.

[Supra60-1]

Also, when you have a question, post in the right place to make more people see it. You shouldve posted this in technical or general discussions.

[suprahero]

That's exactly how I made my lower i.c. pipe. I took the stock pipe to the muffler shop and had them bend 2.5 pipe just like the stock. It worked like a charm and it cost me $20.00 Thats pipe, welding, and two rubber clamps. I had him weld a 2" pipe at the end so it would bolt up to my stock i.c.