Retro-spec unique carbon fiber parts for the MK3

[retro-spec]

Hello to everyone at supramania, I would like to introduce my company and myself.
My name is Paulo Sierra; our company name is Retro-spec.
After years of manufacturing private labels parts and working on hi-profile vehicles we have started our developing our own carbon fiber and composite product line for the MK3 we would like to offer them to supramania customers at special pricing.
We are currently developing mk3 products, so please send us some ideas, we design and manufacture in house so a lot of it is possible.
here are some parts that are available at the moment and the list of what’s in development

MK3 cooling panel

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1495.jpg

http://i152.photobucket.com/albums/s189/aeroworks/100_1869.jpg

retail 79.99 SM introductory price 69.99

MK3 carbon fiber A-pillar gauge set

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1492.jpg

retail 199.99 SM introductory price 179.99

7MGE/GTE CARBON FIBER CAM GEAR COVER

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1587.jpg

retail 169.99 SM introductory price 149.99

CARBON FIBER REAR WINDOW VISOR

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1741.jpg

retail 289.99 SM introductory price 249.99

CARBON FIBER OEM headlight covers

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1733.jpg

retail 229.99 SM introductory price 179.99

CARBON FIBER VENTED headlight covers

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1867.jpg

http://i152.photobucket.com/albums/s189/aeroworks/100_1832.jpg

retail 239.99 SM introductory price 189.99

fiberglass version 119.99

CARBON FIBER HIRO LIGHT COVERS
http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1875.jpg
(fiberglass version shown)

retail 289.99 SM introductory price 239.99

fiberglass version 169.99

CARBON FIBER INSTRUMENT CLUSTER

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1953.jpg

retail 249.99 SM introductory price 199.99

CARBON FIBER FUSE BOX COVER

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1972.jpg

retail 49.99 SM introductory price 39.99




currently in development:

7MG spark plug connector plastic cover
7M spark plug alley cover (for you coil on plug guys)
MK3 gauge cluster panel
MK3 door sills
CF turbo A-DUCT
89+ trim
Raised cowl hood

this thread will be updated to reflect new items as we get them
so please check back with us.

all price are plus shipping from 92103.
paypal payment is prefered.

we carry most of our parts in stock, sometimes we do not
ask for availability first, we still need 7-10 days
to get any order out, if you must have your parts in a shorter period of time
please look somewhere else.
for more pics, info, and products go to www.shop.retro-spec.net
email us any questions to sales@retro-spec.net or PM me.
Thanks and let us know, Paulo.


NOTICE: CURRENTLY WE ARE LOOKING FOR LOWERING SPRINGS AND AFTER MARKET SHOCK ABSORBERS FOR OUR AGED SHOP CAR, WE ARE CONSIDERING NEW OR USED, IF YOU HAVE A SET LET US KNOW WE ARE WILLING TO TRADE A FAIR MARKET VALUE FOR ANY OF OUR PRODUCTS.IF ANYONE IS INTERESTED LET ME KNOW VIA PM.

[Mk3runner]

whens the rest of your parts coming out?

[empera]

looks good cant wait for the cam cover.

[retro-spec]

whens the rest of your parts coming out?

we have molds for the cam gear cover, headlight covers, and fuse box covers
i will update with pics and info as soon has we have finished product.
Thanks, Paulo.

[funky_monkey58]

Sweet make some trim.

[retro-spec]

Sweet make some trim.

its scheduled.
Thnaks, Paulo.

[xms]

I would like the cooling panel and pillar mount for 60 mm guages with handle if it is avaliable ?

[retro-spec]

I would like the cooling panel and pillar mount for 60 mm guages with handle if it is avaliable ?

i have both items, pillars though are without handle, lmk.
Paulo.

[IJ.]

Paulo: Welcome to SM!

If you make Body trim's you have 1 confirmed customer.
(would prefer pre 89's but will take whatever I can get at this stage)

[Enraged]

any plans for a tripple a pillar pod?

or maybe a dual 52mm pod steering column cover?

[retro-spec]

any plans for a tripple a pillar pod?

or maybe a dual 52mm pod steering column cover?

a triple gauge is not far since we already have a mold for the double.
i will get on it. Paulo.

[MA70_Powa]

As long as you guys will ship to Australia I'll be keen to get something from you!! :)

Ooh and howabout a carbon fibre auto shifter? Thatd be sweet.

And please make RHD parts, not just LHD! :D

[retro-spec]

As long as you guys will ship to Australia I'll be keen to get something from you!! :)

Ooh and howabout a carbon fibre auto shifter? Thatd be sweet.

And please make RHD parts, not just LHD! :D



we do ship to AUS, let me see about that shifter our shop car is auto.
lmk, Thanks.
Paulo.

[RazoE]

subscribed!

[martin p]

Could you do a Rhd pillar pod in that set? instead of the Lhd.

[SupraDreamPDR]

Pending pictures... I'll take a set of 89+ Body Trim. Also looking at your interior trim pieces (instrument cluster and radio surround). You may also want to look at making CF door sills and a replacement sheet of CF for the passenger side vent.

[bfr1992t]

+1 door sills!

[IJ.]

Poll added and you can make multiple choices.

[funky_monkey58]

Poll added and you can make multiple choices.
Thanks!

I have been slowly "working" on my CF trim, but if they are made with decent fit/finish and price I would rather just buy a set.

[lewis15498]

I voted for 89+ mouldings, however a completely smooth set would be even better IMO.

[bhmsupra]

Very Nice Stuff. Gotta have a pillar pod.

X2 for the Door Vent Panel.

[shaeff]

Paulo: Welcome to SM!

If you make Body trim's you have 1 confirmed customer.
(would prefer pre 89's but will take whatever I can get at this stage)

I would be ALL over pre '89 trim! That makes two customers for sure.

Edit: and you should make a rear center CF trim piece to replace the '89+ for those of us who want pre '89 trim w/ '89+ tails. That would be absolutely killer.

[retro-spec]

Thanks for the great response, we have a lot to make and all sound like great ideas, we are working hard right now on a few things, plus we just recieved a box full of really cool stuff form a SM donor, more on that later.
Paulo.

[2JZ_MA70]

how about some doors. I know they will be expensive but is heavy as hell.

[retro-spec]

we are working right now on the stereo / ac surround.
would anybody want a straight OEM replacement??
i mean with double din radio opening and A/C controls..
i personally would like to see a single din radio opening
and 3 gauge pods in there angled towards the driver.
let me know, Paulo.

[shaeff]

how about some doors. I know they will be expensive but is heavy as hell.
The door skins aren't heavy. It's the innards that carry all the weight. Ask slow66, he has some gutted doors- I bet they're about 6lbs, if not less.
we are working right now on the stereo / ac surround.
would anybody want a straight OEM replacement??
i mean with double din radio opening and A/C controls..
i personally would like to see a single din radio opening
and 3 gauge pods in there angled towards the driver.
let me know, Paulo.
No straight OEM for me. I prefer to have the A/C controls moved to under the stereo in the double din slot, and 60mm angled bezel incorporated into the old a/c control location.

So it would be like this:
3 gauges (60mm) in A/C location
Stereo
A/C controls

[bhmsupra]

Either way for me would be fine. I personally would like to keep my AC as is, single din and then the 3 guage pod underneah. Angled woud be sick man, just sick.

[retro-spec]

The door skins aren't heavy. It's the innards that carry all the weight. Ask slow66, he has some gutted doors- I bet they're about 6lbs, if not less.

No straight OEM for me. I prefer to have the A/C controls moved to under the stereo in the double din slot, and 60mm angled bezel incorporated into the old a/c control location.

So it would be like this:
3 gauges (60mm) in A/C location
Stereo
A/C controls



sounds great i like this idea even better, keep them coming.
Paulo.

[retro-spec]

just did some messuring, to put 60 mm pods comfortably where the a/c controls are the ashtray needs to go, i think even some electronics could go there. Personally I dont care much for it but lets hear what you guys think about it.
Paulo.

[SupraDreamPDR]

Just a stock replacement for the whole piece would rock.. Plus I think that would be easy for you to replicate. Yes?

[Mk3runner]

89+ is prefect for me as I have a 92 in regards to body pieces, the cf single din radio with gauges below sounds interesting but I'm more for a cover piece so I can mount whatever I choose.

a ash tray cover piece would be great for a mounting spot for aftermarket components.

how about glove box set up for gauges and such. theres a old pic roaming around for rhd setups but I cant find it to use as reference.

[guido]

interest by cf single din radio with gauges below and a lot mores parts

[RazoE]

I don't have that many gauges for a 3 hole stereo surround..

I do however have my boost gauge in my cigarette lighter, so maybe a wider opening for that..

[isnms]

how about an overlay for the dash

http://i80.photobucket.com/albums/j187/isnms/Supra/CF_dashcover.jpg

[Enraged]

id like a blank stereo/console replacement. Then I can place things where I want, including gauges, etc. AC controls would go in the arm rest for my car.

[shaeff]

just did some messuring, to put 60 mm pods comfortably where the a/c controls are the ashtray needs to go, i think even some electronics could go there. Personally I dont care much for it but lets hear what you guys think about it.
Paulo.
I don't smoke, so the ashtray has always been empty in my car. Whatever is needed to make three 60mm gauges angled toward the driver is what I'm interested in.

a ash tray cover piece would be great for a mounting spot for aftermarket components.

how about glove box set up for gauges and such. theres a old pic roaming around for rhd setups but I cant find it to use as reference.

That's so far away to look. I'm not saying it wouldn't look cool, but the functionality of that is next to zero. If the gauges aren't within a super fast glance, they don't belong.

Glove box setup for stuff like the maft pro would be cool, though.

[retro-spec]

89+ is prefect for me as I have a 92 in regards to body pieces, the cf single din radio with gauges below sounds interesting but I'm more for a cover piece so I can mount whatever I choose.

a ash tray cover piece would be great for a mounting spot for aftermarket components.

how about glove box set up for gauges and such. theres a old pic roaming around for rhd setups but I cant find it to use as reference.

we do make them for other cars.
http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20WRX%20PARTS/b638.jpg

[Mk3runner]

That's so far away to look. I'm not saying it wouldn't look cool, but the functionality of that is next to zero. If the gauges aren't within a super fast glance, they don't belong.

Glove box setup for stuff like the maft pro would be cool, though.

I completely agree with you. I like gauges in eye slight, if I have to look to the 3 o clock postion then theres a issue. I'm just tossing ideas out as I want to build or buy something to get rid of the open gap I have below the radio and make better use of the glove box as all it carries is insurence papers and registration.. maybe a few other things but overall theres room for something else.

[Enraged]

thats why i mentioned a dual 52mm pod integrated into the steering column cover, very visible spot. you would just need a matching CF lower cover :)

[Scruggs86.5T]

I'm in for the moldings, smooth 89+ with the center taillight section. Also I think I would want the radio surround to be just the single din without any gauges but to include AC and ashtray. Also what about making the switch panel on the left side of the steering wheel, with options as to how many switches, to sell along with the radio bezel. That way you would have the same material on either side of the wheel.....

[Scruggs86.5T]

oh yeah, the vent panel above the glove box is one of those that I would definitely be in for, mine looks like crap.

[retro-spec]

I'm in for the moldings, smooth 89+ with the center taillight section. Also I think I would want the radio surround to be just the single din without any gauges but to include AC and ashtray. Also what about making the switch panel on the left side of the steering wheel, with options as to how many switches, to sell along with the radio bezel. That way you would have the same material on either side of the wheel.....

mold is being made for the switch panel oem like, Paulo.

[Scruggs86.5T]

oops guess I didn't see that part. I would like one with the dimmer roller under and only one switch position (preferably closer to the steering wheel), I did away with the other two switches. If not then maybe some blank inserts that would fill the holes, kinda like the blank oem inserts?

[Cz.]

I'm interested in the 89+ body molds and also door sills.
You mention an instrument cluster in the works? Would that be like a custom cover for people who remove the stock gauge cluster? This is the route I'm thinking about taking for my car so I'd be interested in more details.

[retro-spec]

I'm interested in the 89+ body molds and also door sills.
You mention an instrument cluster in the works? Would that be like a custom cover for people who remove the stock gauge cluster? This is the route I'm thinking about taking for my car so I'd be interested in more details.

we are making a CF version of the stock plastic one, well probably make one
that accommodates after market gauges in the location of the OEM ones.
a totally shaved one could be possible.
Paulo.

[mattsplat72]

I would be willing to let you guys make a mold of my Turbo A Duct. if anyone would be interested.

[SupraOfDoom]

I have his gauge pods quality is good.

Hopefully your box of parts works out ;).

I will also purchase most of the things you have planned that I don't already have.

I still vote for trim **including the center piece on the tail lights**.

Do it right, and I promise this will make you money since everyone and their mom needs trim.

[atlpd3147]

How about a glove box cover panel. By that I mean a panel that would cover the hole left if you take out the glove box. This would be great for guys that have a aem ecu or such. No need to find a way to stuff your wires and ecu if you just have a cover.

[johnd]

I would like the 2" wide plastic window trim for the driver and passenger sides.:love:

[T701jz]

pre 89 body molds (RED KEVLAR)

Window trim (RED KEVLAR)

Door Sills (RED KEVLAR)

Rear Visor (RED KEVLAR)

Hood (RED KEVLAR)

[RazoE]

mold is being made for the switch panel oem like, Paulo.


keep in mind there are two switch panels...

86.5-89, and 90-92...

the former has the dimmer on the bottom; the latter in one of the slots and is less tall..

here are the orientations, incase anyone is interested..


86.5: foglight switch, cruise activation switch, rear defroster, blank plate
87/88: foglight switch, cruise activation switch, rear defroster, coin holder
89: foglight switch, coin holder, rear defroster, coin holder
90: foglight switch, dimmer switch, rear defroster, coin holder
91/92: foglight switch, dimmer switch, rear defroster, coin holder/sunroof switch (if applicable)

[SupraDreamPDR]

I would like the 2" wide plastic window trim for the driver and passenger sides.:love:

Oh, good idea!! I would go for that.

[RazoE]

Oh, good idea!! I would go for that.

what's that..?

[berto22]

I'm in for the pre 89 mouldings and i also need the front window trim. Or as they call it the windshield cowl.

[NewWestSupras]

I want to do Tookwik's c.o.p. mod, and I'd like to have a cf "spark plug cover" that would work with that. It would need the cutouts for the coils...would that be possible? thanks.

[retro-spec]

I want to do Tookwik's c.o.p. mod, and I'd like to have a cf "spark plug cover" that would work with that. It would need the cutouts for the coils...would that be possible? thanks.

i sell you the blank, but the cut outs youre going to have to make..
lmk, Paulo.

[NewWestSupras]

Would you have a pic of the spark plug cover? I looked on your website, but didn't see that part....thanks!

[SupraOfDoom]

Everyone has a request on pre-89 or 89+ moldings. As long as you include that center section people will buy either or I don't think they are that picky.

Personally I think flat > not flat. So pre-89 is better looking... however I'd rock both.

[berto22]

Everyone has a request on pre-89 or 89+ moldings. As long as you include that center section people will buy either or I don't think they are that picky.

Personally I think flat > not flat. So pre-89 is better looking... however I'd rock both.



Yes agreed, I would buy either i just need to stop driving my car without holes on the doors!!

[retro-spec]

my 88 has clean moldings, but if we make them it would one or the other, i like 89+ so i guess ill vote and give it the weekend, so vote people please:biglaugh:

[IJ.]

my 88 has clean moldings, but if we make them it would one or the other, i like 89+ so i guess ill vote and give it the weekend, so vote people please:biglaugh:

I'd be happy with either as these are a bit of a "holy grail" for early Mk3 owners as ours rust underneath and bubble up.... :(

"If you make them they will sell"

[SupraOfDoom]

Yeah they really do suck ( pre-89 rusting trim ). Everytime I wash the car you can see rust drips that run down the car. :(.

[bmoss85]

door panels and inserts would be cool. and whatever you call those black plastic things behind the driver and passenger windows.

[IJ.]

Yeah they really do suck ( pre-89 rusting trim ). Everytime I wash the car you can see rust drips that run down the car. :(.
My car is rust free..... except for one door mold :(

door panels and inserts would be cool. and whatever you call those black plastic things behind the driver and passenger windows.
"B pillar trims" ;) now go vote!

[SupraDreamPDR]

Damn, I voted before B-Pillar Trim was an option. So.. +1 to that please!

[IJ.]

Damn, I voted before B-Pillar Trim was an option. So.. +1 to that please!

Yeah it's a poll bug ;)

Anyone else?

I can add them manually.

[ricoboost]

i think the center console in carbon would be great too like duane was doing long time ago

[bmoss85]

Yeah it's a poll bug ;)

Anyone else?

I can add them manually.

I want to change my vote to the b-pillar trim.

[IJ.]

You could select multiples ;)

[retro-spec]

I want to change my vote to the b-pillar trim.

do multiple please!!!

[ms07s]

Do the mouldings, any mouldings, and they will sell. +1 for pre-89.

[dubsupra209]

Do the mouldings, any mouldings, and they will sell. +1 for pre-89.

what about that plastic above the cluster that you have to unscrew to take out the clusters that would be cool if you made that cf and all the plastica around the steering wheel cf i would buy it...

[carter]

I'm deff up for the 89+ trim, but i'd like to get a passanger side vent thingy cf. I like the cf dash cover and love to see rain guards, but thats just me

[SupraOfDoom]

Also already voted.. sooo plus 1 for b pillars.

[Supraboostin]

Yeah it's a poll bug ;)

Anyone else?

I can add them manually.

one vote for b pillar trim

[RazoE]

what about that plastic above the cluster that you have to unscrew to take out the clusters that would be cool if you made that cf and all the plastica around the steering wheel cf i would buy it...



completely useless and utterly pointless as a decorative item..

HOWEVER, it is a great idea to use the strength of cf for that piece, as they get very brittle with age and break off very easily..

[89supraa]

i would buy a set of the vent/trim pieces behind the drivers and passenger
side window,because my stock ones are bent and broken and i am guessing my car is not the only one like that.

[kikdurazz]

Paulo: Welcome to SM!

If you make Body trim's you have 1 confirmed customer.
(would prefer pre 89's but will take whatever I can get at this stage)

I knew IJ would jump on this :)

Pre-89 trim you have another buyer. My car is ready to have these replaced and would rather get something that lasts then rust out and bubbles again. So sick of looking at bubbles down the side of the car that has caused the back quarters to start rusting :(

[Captain]

what about that plastic above the cluster that you have to unscrew to take out the clusters that would be cool if you made that cf and all the plastica around the steering wheel cf i would buy it...

+1 Mine is all cracked to hell and falling apart.
+1 on the switch console thingy to the left of the steering wheel. Can you do a custom piece for that? (mine has aftermarket switches in it.)
http://i246.photobucket.com/albums/gg97/TheCaptainWasHere/P5110030.jpg

[NewWestSupras]

Hey Paulo,
Can you send a pic of the spark plug valley cover to:
ger1ald@yahoo.com? thanks!
or post it on here?
thanks

[Supraholics]

I'd be happy with either as these are a bit of a "holy grail" for early Mk3 owners as ours rust underneath and bubble up.... :(

"If you make them they will sell"

This is so out of character for you IJ :biglaugh: I like it!

[dubsupra209]

completely useless and utterly pointless as a decorative item..

HOWEVER, it is a great idea to use the strength of cf for that piece, as they get very brittle with age and break off very easily..

i was leanng on it being stronger cause i've had two and they both got cracks in them......

[bhmsupra]

Hopefully all the good requests from the board here will get this vendor going. Keep them coming and maybe we can have new stuff soon.

[retro-spec]

BUMP!!
for brand new CF cam gear cover for you 7M guys, made to last and look great.
just wanted to share the novelty.

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1587.jpg

we always update our first page, with the latest parts and price info.
take advantage of the SM introductory offer prices since there not forever, more parts to come!!


Paulo.

[Kristian_Wraae]

you should make something that covers the ABS unit. By far the ugliest part of the mkIII engine bay.

[Turbo Habanero]

how hard is it to convert your car from pre 89 moldings to post 89 moldings?

[Turbo Habanero]

i would buy a set of the vent/trim pieces behind the drivers and passenger
side window,because my stock ones are bent and broken and i am guessing my car is not the only one like that. +1 on my 87

http://i191.photobucket.com/albums/z181/EvoRacer20/SANY0251.jpg

[suprahero]

I vote for B pillar trim and door sills for sure but I'm pretty much open to whatever you want to make.

[Canuckrz]

how hard is it to convert your car from pre 89 moldings to post 89 moldings?

As easy as tearing the old shitty ones off and popping the new ones in place, iirc there are two additional holes that need to be drilled in the back for the new moldings but that's no biggy. It would look a bit odd though if you didn't swap out the tail lights as well at the moldings are attached to that center piece.

[Turbo Habanero]

As easy as tearing the old shitty ones off and popping the new ones in place, iirc there are two additional holes that need to be drilled in the back for the new moldings but that's no biggy. It would look a bit odd though if you didn't swap out the tail lights as well at the moldings are attached to that center piece.

thanks for the info

[89supraa]

What is the B pillar trim?

[IJ.]

The trim on the B Pillar.....:nono:

[Turbo Habanero]

The trim on the B Pillar.....:nono:

lol NEXT Question What's the B pillar :)

[IJ.]

The one after the A Pillar of course ;)

[Turbo Habanero]

the one after the a pillar of course ;)

roflmao

[IJ.]

Small hint in case he hasn't figured it out yet "A" is the first letter of the alphabet so guess which is the A pillar :D

[GC89]

LMAO Ian,

In for B pillars, broke mine while drying after a wash and at $150 a set I'v been hoping for something of better quality like this.

Doorsils would be nice as well.

[Poodles]

LMAO Ian,

In for B pillars, broke mine while drying after a wash and at $150 a set I'v been hoping for something of better quality like this.
Doorsils would be nice as well.

Stock lasted 20 years... I'd call that quality :rofl:

[GC89]

I would too if it wasnt my second set

[Enraged]

for the CF timing cover, are the mounting holes already drilled, or do we have to do that ourselves?

[retro-spec]

for the CF timing cover, are the mounting holes already drilled, or do we have to do that ourselves?

comes fully drilled, installed pics in the morning guys, Thanks.
Paulo.

[Turbo Habanero]

I'm so excited i just can't hide it !!! :aigo::aigo:

[mecevans]

pre 89

[retro-spec]

bump!!! for the pics installed, cam gear cover will come with SS hardware.


http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1593.jpg

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1603.jpg

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1595.jpg


look for more parts soon...

[mkIIIman089]

Ever thought about making a front bumper cover, engineered to eliminate the front crash beam? Similar to how the old CFX one used to be?

[MA702Tone]

Paulo: Welcome to SM!

If you make Body trim's you have 1 confirmed customer.
(would prefer pre 89's but will take whatever I can get at this stage)

+1^ Looking to purchase all the trim soon “within 4months”, I would prefer to hand over some coin to a person in the Supra Community that takes pride in his work. Keep up the great work!! :burnout:

[IJ.]

Paulo: I really hope there's enough demand to warrant the pre 89 trims :)
(very impressed with the work you've shown so far)

[retro-spec]

Paulo: I really hope there's enough demand to warrant the pre 89 trims :)
(very impressed with the work you've shown so far)

hopefully, +89 will happen for sure.
Thanks, Paulo.

[IJ.]

LOL <fingers crossed> for Pre as well, there are enough small differences that 89+ are a bit of a pain to fit. ;)

[SupraOfDoom]

I never had any problems putting my 89+ trim on my 87. No drilling was needed. Plug and play ( besides the center section rear tail piece ).

[IJ.]

I never had any problems putting my 89+ trim on my 87. No drilling was needed. Plug and play ( besides the center section rear tail piece ).
Bingo... :(

[retro-spec]

I never had any problems putting my 89+ trim on my 87. No drilling was needed. Plug and play ( besides the center section rear tail piece ).

as far as i know, this is true. and the center light piece will be addressed so the -89 lights can be used, Paulo.

[Turbo Habanero]

I want it:aigo:

[northwestsupra]

i'd get it just to be ready for when i need it :P i agree with the steering wheel gauge pod "dual" and i like the carbon fiber overlay to. i've never seen CF personally so i dont know how thick it is. but since i know CF targa will be brought up sooner or later, maybe just make a CF overlay for that to that can just wrap around the edges? and trim to hold it on with some glue or something on the underside. the only reason i say this is because everyone seems to say that a CF targa would break easy or something like that. CF door panels would be sweet, i think CFX did that. and CF rear trim would be cool to but completely for cosmetic reasons

[Turbo Habanero]

MK3 headlight covers
MK3 vented headlight covers
MK3 cf rear window visor
CF Hiro tailight covers
CF turbo A-DUCT


I can't wait to see some photo's of this stuff going to be on a buy list for sure

[SupraOfDoom]

Bingo... :(

Yeah but you can remove and replace with a new one with some super glue.. that's like nothing... compared to what your doing with your car or have already done.

[MA70_Powa]

Really keen on the headlight covers - one vented one not. make em soon please, lol :)

what are the tail light covers like? photos of a non-cf version anyone?

[SupraOfDoom]

Really keen on the headlight covers - one vented one not. make em soon please, lol :)

what are the tail light covers like? photos of a non-cf version anyone?

http://img.photobucket.com/albums/v13/SupraDoom/P8130125.jpg

[MA70_Powa]

ahhh, cheers :)


...OT but was that a red supra only meet? :P

[Turbo Habanero]

ahhh, cheers :)


...OT but was that a red supra only meet? :P

almost seems like it lol

[wesbeech]

Do you still have the cooling pannels in stock?

[retro-spec]

Do you still have the cooling pannels in stock?


yes we do, 75.00 shipped, Thanks and let me know.
Paulo.

[SupraMan1987]

Any new news on the carbon fiber gauge trim? Is it going to be the gauge surrounds or what? I wouldn't mind having the black piece that goes above the gauge cluster as well.

[retro-spec]

Any new news on the carbon fiber gauge trim? Is it going to be the gauge surrounds or what? I wouldn't mind having the black piece that goes above the gauge cluster as well.

on stand by wainting for molds to be finished.
for next week will have, CF headlights vented and OEM, CF turbo A duct, HIRO tailight covers and CF rear visor(shade).
Paulo.

[LilMissMkIII]

Email sent.

[supra guy scotty]

:icon_bigg Subscribed!


Scotty

[SupraOfDoom]

I think I'm more excited then you guys :P.

[Turbo Habanero]

I think I'm more excited then you guys :P.

I just want new trim i need it for my car :)

[dragracer]

http://img.photobucket.com/albums/v13/SupraDoom/P8130125.jpg

Thats a nice car!!! :naughty:

[empera]

how much for shipping to PA for the 7m cam gear cover?

[retro-spec]

how much for shipping to PA for the 7m cam gear cover?


10 bucks to ship to PA, in stock.
Thanks.

[Enraged]

for the center console with the 3 gauge spots, can we get it with 52mm gauge holes cut rather than 60mm?

[CajunKenny]

Sorry if this has been asked already; but, I didn't want to read thru all the posts for the answer. ;)

How much are the vented and oem headlight covers.

Just a suggestion here; but, posting pics and prices on your first post would make things crazy eazy! :)

Thanks!

[retro-spec]

for the center console with the 3 gauge spots, can we get it with 52mm gauge holes cut rather than 60mm?

Yes they will dome out blank i will drill holes out depending on your request.
Thanks, Paulo.

[retro-spec]

Sorry if this has been asked already; but, I didn't want to read thru all the posts for the answer. ;)

How much are the vented and oem headlight covers.

Just a suggestion here; but, posting pics and prices on your first post would make things crazy eazy! :)

Thanks!

we update the first post as soon as parts are available, thats why the headlight covers are not up yet i will have part Tuesday-Wednesday prices for the headlight covers are.

179.99 vented, oem or a combination of both.

hit me back for pics in a few, Paulo.

[CajunKenny]

we update the first post as soon as parts are available, thats why the headlight covers are not up yet i will have part Tuesday-Wednesday prices for the headlight covers are.

179.99 vented, oem or a combination of both.

hit me back for pics in a few, Paulo.

Cool. I'll check back next week for pics.

Regarding pricing...I hate to assume; but, I'm assuming that 179.99 is for Qty. 2. Correct?

Thx! :)

[toyotanos]

I'll go for a CF Turbo-A duct and a *vented* COP spark plug valley cover.

[Turbo Habanero]

What is a Turbo A-Duct

Sorry i know im dumb.....Its more then likely very simple to figure it out.

[JonnyRedline]

subscribed!

[T701jz]

How would you mount the Pillars/gauges?

-Noel

[SupraOfDoom]

What is a Turbo A-Duct

Sorry i know im dumb.....Its more then likely very simple to figure it out.

http://img.photobucket.com/albums/v13/SupraDoom/th_000_0237.jpg (http://img.photobucket.com/albums/v13/SupraDoom/000_0237.jpg)

[retro-spec]

Cool. I'll check back next week for pics.

Regarding pricing...I hate to assume; but, I'm assuming that 179.99 is for Qty. 2. Correct?

Thx! :)

that is correct price is for a set, Paulo.

[retro-spec]

How would you mount the Pillars/gauges?

-Noel

most people use double sided tape or a small screw, they go over the oem ones.
Paulo.

[kotu100]

how about some kinda rear diffuser?
i have the bomex rears, and it just seems as if something is missing in the middle, a CF diffuser would set it off NICE!

[SupraOfDoom]

shineauto has a rear cf diffuser coming so idk if he would want to purse that.

[rodel]

shineauto has a rear cf diffuser coming so idk if he would want to purse that.

Shine has a few diffusers that work with the MKIII.

[toyotanos]

What is a Turbo A-Duct

Sorry i know im dumb.....Its more then likely very simple to figure it out.

There were a limited number of Turbo-A Supras sold that had better performance, and other goodies, but they also had an additional duct (mounted in the bumper where your license plate goes) for more intercooler/radiator cooling air flow. See 92NSX's build thread for pictures.

http://www.supramania.com/forums/showthread.php?t=74301
Post #5 has the pictures.

[Moy]

There were a limited number of Turbo-A Supras sold that had better performance, and other goodies, but they also had an additional duct (mounted in the bumper where your license plate goes) for more intercooler/radiator cooling air flow. See 92NSX's build thread for pictures.

http://www.supramania.com/forums/showthread.php?t=74301
Post #5 has the pictures.

IIRC, the oil cooler mounted behind the duct to direct more flow to it, not to the intercooler

[BrandonW]

not sure if this has been brought up but what about the tems electronics cover/caps in the engine bay?

[retro-spec]

not sure if this has been brought up but what about the tems electronics cover/caps in the engine bay?

i was thinking about that myself mine are almost gone...
Paulo.

[speedgilligan]

So Paulo, when are you guys gonna pull one on Koenigsegg and make some ballin CF valve covers? :naughty::naughty: I'd spend some cash to see that happen. I would also be highly interested in some trim (set of 88- with the 89+ tails)

[RazoE]

i was thinking about that myself mine are almost gone...
Paulo.



I have an extra set that I took off my 86.5, willing to let them go..

[Enraged]

any progress?

[retro-spec]

any progress?

later in the week well have..

radio/gauge cluster surround
CF turbo Aduct
CF rear window visor
CF HIRO light covers
CF OEM lightcovers

working on..
targa b pillar trim
vented headlight covers
door sills
arm rest cover.
Body trim


Thanks, Paulo.

[funky_monkey58]

later in the week well have..

radio/gauge cluster surround
CF turbo Aduct
CF rear window visor
CF HIRO light covers
CF OEM lightcovers

working on..
targa b pillar trim
vented headlight covers
door sills
arm rest cover.
Body trim


Thanks, Paulo.
Any rough estimate on how much the body trim will be?

Need to start saving up.

[supra guy scotty]

VERY intersted to see the CF Turbo A duct, and the rear window visor! Subscribed!


Scotty

[retro-spec]

Any rough estimate on how much the body trim will be?

Need to start saving up.

not yet until we actually make one.
Thanks, Paulo.

[blk92suprat]

interested in the radio/gauge cluster surround.

[Cz.]

Are you going to be making an FRP A-duct? My bumper isn't going to be carbon so I don't see much point in the a-duct being carbon...

[retro-spec]

Are you going to be making an FRP A-duct? My bumper isn't going to be carbon so I don't see much point in the a-duct being carbon...

Yes, they will be available in FRP, thing is you still have to prep and color match.
whit the CF one you just install comes fully finished.
Thanks, Paulo.

[bdcoaster]

Paulo im super excited in all your carbon fibre products!!! Post more pics soon!!!!!!

[Skynin]

I would be very interest in a non-OEM CF hood.

[retro-spec]

I would be very interest in a non-OEM CF hood.

we are going to start working on a raised cowl hood pretty soon.
Paulo.

[OneJArpus]

we are going to start working on a raised cowl hood pretty soon.
Paulo.


i can't wait i'd be all over that like white n rice

[VooDoo]

My god Paulo. I been gone awhile from here. Saving up for my proposal and all so been broke but thats over and now I gonna stay that way with you here now...

I am in for all the following.

Pre 89 molding
B-pillar
Radio bezel 3 gauge w/ac omit ass tray
Turbo Aduct
along with the headlight cover one vented.

When the production is done on the Cowl hood i want to be the first buyer.

side not if you need any parts for molding pm me i got a shop full.


Not sure but that cf overlay for the dash was nice. Especially for us with a nasty crack down the middle.

[retro-spec]

My god Paulo. I been gone awhile from here. Saving up for my proposal and all so been broke but thats over and now I gonna stay that way with you here now...

I am in for all the following.

Pre 89 molding
B-pillar
Radio bezel 3 gauge w/ac omit ass tray
Turbo Aduct
along with the headlight cover one vented.

When the production is done on the Cowl hood i want to be the first buyer.

side not if you need any parts for molding pm me i got a shop full.


Not sure but that cf overlay for the dash was nice. Especially for us with a nasty crack down the middle.


i have done a complete dash before:naughty:

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20CUSTOM%20PARTS/33gq5.jpg

[Bock]

Any plans for a RHD MK3 A pillar pod? Iam sure there not in high demand by any means , but i'd purchace one in a heart beat! great looking products by the way !

[retro-spec]

here is another one we did for a 3000gt.

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%203S%20PARTS/300gtjpg.jpg

[VooDoo]

Do I really want to know the price for a MK3?
It looks amazing

[retro-spec]

Do I really want to know the price for a MK3?
It looks amazing

not yet guys but i want to show it can be done, just have see some love for the smaller less expensive items first :thumbup:so we can tackle something as big as the dash.

[retro-spec]

more goodies, remember that prices and pics are updated in the first post of this thread, Thanks.
Paulo.



CF rear window visor.

compression molded, smooth back, sticks on with double sided tape to glass no hardware needed.

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1741.jpg

CF OEM light covers.

they dont do much, but boy there pretty!!!

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1733.jpg

[empera]

they look great man! keep it up....

[Turbo Habanero]

Sweet i want to see that visor on a Car if possible would be great!!

[mecevans]

i want that visor!

[OneJArpus]

holy fuck! Talk about great work man!

[rtrdpenguin]

wow excellent items, I can't wait for the tail light covers

[MA70_Powa]

:O
Bring on the vented headlight covers :)

[atlpd3147]

Oem hood or one with a molded in hood scoop. Or of like the mkiv hood scoop. Nothing too large or ugly just tasteful

[Buckweed]

carbon fiber targa please
thank you

[mecevans]

WANT NOW!
lower window trim. other ones discontinued..
hatch sun visor sunshade

maybe...
outside door handles either inside outside or both?
pre 89 front lip
mirrors
mud flaps

thanks

[Guyana00]

I know it's hard but I would really like to see a few pre-89 lips. If yu could get the shape and fitment for the bumper right or even close you would dominate the market for pre-89 lips.

[White Zombie]

Hey Retro, Im all in for a raised cowl CF HOOD. How long before you can get one ready. (you said you were working on it)

[roundfinger]

I am also in the market for a pre-89 front lip, be it CF or not. But i prefer something subtle and not over the top.

[TheNewRed]

I just ordered a timing cover, fuse box cover, and IC plate, im very excited to recieve the parts, but now im thinking i want more, maybe a CF three peice wing, Definetly CF door seals, DEFINETLY a Pre-89 CF Lip and one other thing

Maybe a more affordable, better looking version of the exhaust sheild that Titan has, IMO that thing looks awful and overpriced($175 for this piece), you should see what you can do Paulo:naughty:
http://ep.yimg.com/ca/I/titanmotorsports_2075_73081071

[TheNewRed]

O and one other part, a CF CPS cover, that would be easy to make!:naughty:

[Van]

A CF Wind Splitter below the air dam, for race days, would be nice. Extends four inches out from the air dam.
Four CF Canards, two for each side of the bumper cover.
Adjustable CF rear wing. Van

[retro-spec]

vented headlights available prices at the 1st page Thanks!!

http://i152.photobucket.com/albums/s189/aeroworks/100_1832.jpg

[92nsx]

Dam ^^^ keep up the good work! My self Im not in the CF market........yet. The first thing I would be looking for is a CF targa top and hood. I not looking for the weight savings rather replace the panels that have MAJOR paint fade on my sup. Cheaper then new paint.

[mlddjb]

some nice vented cf front fenders would be nice

cf rear hatch heavy as hell

cf tagra top

cf doors heavy as hell

cf vented or stock hood heavy as hell

cf gas door would be nice

just a couple of ideas

[RazoE]

I already have a CF gas-door...:naughty:

http://www.supramania.com/forums/picture.php?albumid=70&pictureid=4373

maybe a CF license plate insert for 89+ taillights..?

http://www.jhpusa.com/store/pc/catalog/mugen/mugen.dc5.cfplatecover_d.jpg

[sous]

can you make kit for yhe left headlight cover like oem and right vented

[VooDoo]

Im sure you could just get one of each when you order. If you ask him.

[retro-spec]

Im sure you could just get one of each when you order. If you ask him.

Yes i can combine vented and none vented.
Thanks and let me know, Paulo.

[empera]

any plans on making a cps cover?

[TheNewRed]

Yes i can combine vented and none vented.
Thanks and let me know, Paulo.

Paulo, what the hell is going on, you havent been responding to my emails for over a week now? WHERE ARE MY PARTS, or my money?!?!?!?! :3d_frown:

Has anyone else bought anything from him?

[BrandonW]

i got my cam gear cover and it took about a week

[retro-spec]

Paulo, what the hell is going on, you havent been responding to my emails for over a week now? WHERE ARE MY PARTS, or my money?!?!?!?! :3d_frown:

Has anyone else bought anything from him?


Alex, we ship out ounce a week even if the parts are packed and ready to go.
your cam gear cover and your radiator panel are ready to go, they will ship out
tomorrow the fuse box is not ready to go out with the other 2 parts.
i will refund you for the fuse cover and you can buy at a later date if you want.
Thanks, Paulo.

[BrandonW]

have any pics of the fuse box? is it the whole box with the cover or just the top?

[retro-spec]

have any pics of the fuse box? is it the whole box with the cover or just the top?


its a cover that goes over the oem plastic one, just a good look part.
Paulo.

[retro-spec]

Hiro light covers in stock!


http://i152.photobucket.com/albums/s189/aeroworks/100_1874.jpg


Prices at the 1st page of the thread, Thanks

[mecevans]

CF of the black plastic piece on the side and front of the headlamps

http://i140.photobucket.com/albums/r6/mecevans/parts/CIMG0068.jpg

[T701jz]

^^^+1

[T701jz]

Hiro light covers in stock!


http://i152.photobucket.com/albums/s189/aeroworks/100_1874.jpg


Prices at the 1st page of the thread, Thanks

You have got to make one for pre 89.......

Still waiting for price quote for RED CF I listed. Just how much more on top of the reg price CF to make it custom red CF? I got the door sills from Ebay and it's not bad.

-Noel

[Enraged]

CF of the black plastic piece on the side and front of the headlamps

Good idea

[retro-spec]

You have got to make one for pre 89.......

Still waiting for price quote for RED CF I listed. Just how much more on top of the reg price CF to make it custom red CF? I got the door sills from Ebay and it's not bad.

-Noel


sorry about that, pm with the list of items youre interested in red, Thanks.
Paulo.

[7M-KDL]

O and one other part, a CF CPS cover, that would be easy to make!:naughty:

i made one..two actually...ill get pics..of course, i dont plan on mass producing them since i make them by hand

also, im making door sills, thought about making b pillars but thought they may look "ricey" but thats just my opinion. once again, im not mass producing, pretty much just making them for a few people in my area


oh, and im not trying to take away from the retro-spec business, as a matter of fact im sure he can do it cheaper than me


other ideas(may have already been done or mentioned) a glove box panel to mount electronics (piggy back systems) just to make it clean and not have to hack up the dash

[7M-KDL]

NOT cool to post like this in a vendors thread.

well as i said, i am not trying to take anything from the vendor. merely saying that it can and has been done. and with this vendors knowledge and material availability he should easily be able to mass produce a good product for everyone to enjoy

[rtrdpenguin]

Wow nice, is there a center section cover included with the tail light covers? They look good!

[retro-spec]

Wow nice, is there a center section cover included with the tail light covers? They look good!

Good point, i could develop it.
it hasn't been brought up before, Paulo.

[VooDoo]

Any status on the radio bezel, b-pillar,pre-89 trim Or hood.

As for the hood is it going to be OEM i am wanting a raised cowl style.

Keep up the great work.

[retro-spec]

Any status on the radio bezel, b-pillar,pre-89 trim Or hood.

As for the hood is it going to be OEM i am wanting a raised cowl style.

Keep up the great work.

radio bezel is done we are cleaning the 1st one and installing it in a couple of days, no trim yet, the hood will abe a raised cowl version.
Thanks, Paulo.

[retro-spec]

We are currently we are looking for lowering springs and after market shock absorbers for our aged shop car, we are considering new or used, if you have a set let us know we are willing to trade a fair market value for any of our products.if anyone is interested let me know via pm.


Thanks, paulo.

[hockysa]

Interested in all the CF parts, (minus tail light covers)

cept will need relevant items made for RHD
and cam cover for 1JZ instead :)

[foreverpsycotic]

Perfect part would be a MKIII carbon (and FG) hood with a raised cowl. Unless you cut up and weld your stock hood, you cant get this anywhere and I would pick up a FG unit (not a fan of CF too much) when I get some stable cash flow.

[retro-spec]

Perfect part would be a MKIII carbon (and FG) hood with a raised cowl. Unless you cut up and weld your stock hood, you cant get this anywhere and I would pick up a FG unit (not a fan of CF too much) when I get some stable cash flow.

i see the raised cowl hood being made first infiberglass.

[NYsBlueMA]

What about front fenders? maybe a nice piece for the rear trunk area lol cant even get the privacy veil from toyota maybe a panel that lifts with the hatch definite seller even the interior mirror covers things toyota discontinues that we dont even realize we need

[foreverpsycotic]

i see the raised cowl hood being made first infiberglass.

Awesome, LMK if it moves forward. You have one buyer!

What about front fenders? maybe a nice piece for the rear trunk area lol cant even get the privacy veil from toyota maybe a panel that lifts with the hatch definite seller even the interior mirror covers things toyota discontinues that we dont even realize we need

There would be little to no weight savings with FG fiberglass front fenders. Just posting that as a FYI.
Now flared front fenders...

[VooDoo]

^^^^^^^^make that 2 buyers^^^^^^^

I would prefer FG as well. If you get one done you can count me in 100% to buy it. I will be getting the other parts in FG that are avail over the CF.

[xms]

make ir ^^^3^^^ buyers

[818Supra]

Make it 4 buyers! for the raised-cowl fiber glass hood.

[retro-spec]

Make it 4 buyers! for the raised-cowl fiber glass hood.

fiberglass raised cowl has been bumped to the top of the list guys:biglaugh:

[Amar]

fiberglass raised cowl has been bumped to the top of the list guys:biglaugh:


Noooooo! Radio Bezel first:icon_razz

[Cz.]

fiberglass raised cowl has been bumped to the top of the list guys:biglaugh:

Seeing as it's an big item to design and create, maybe you should setup a group buy. That way you can actually have people put in some or all of the money to make sure that there actually are 'buyers' for the hood. Personally I have no interest in the a raised cowl hood. If you decide to make a Stout style hood however, I'd definitely be in.

[dbsupra90]

can't wait to see pics of the hood. i've been wanting an fg hood for quite a while. hopefully shipping won't kill me being on the other side of the country.

congrats on becoming an authorized vendor!

[the t3d]

fiberglass raised cowl has been bumped to the top of the list guys:biglaugh:

HELL YES!!!!!!!

-t3d

[retro-spec]

Noooooo! Radio Bezel first:icon_razz



jajaja its already done Bro, pictures in a bit...

[suprahero]

What's already done, and where are the pictures? I too may be interested in a fiberglass hood if it looks good.

[retro-spec]

first page updated with more parts with prices, all in stock!!!!!

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1972.jpg

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1953.jpg

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1955.jpg

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1952.jpg

http://i152.photobucket.com/albums/s189/aeroworks/CARBON%20FIBER%20SUPRA%20PARTS/100_1580.jpg

[VooDoo]

So we would cut our own gauge holes? Guess the ass tray is going to be on all. The lighter I can modify for a small gauge. Is the bottom pic the mold or is a fiberglass avail?
Either way this looks amazing. I am no doubt going to have this on my list.

[retro-spec]

So we would cut our own gauge holes? Guess the ass tray is going to be on all. The lighter I can modify for a small gauge. Is the bottom pic the mold or is a fiberglass avail?
Either way this looks amazing. I am no doubt going to have this on my list.

i can cut holes, yes ashtray is on all.
fiberglass will be available,Thanks.

[Hmong_1G]

I just registered with you guys. Got the rear visor in just fiberglass? What would be nice is brake cooling ducts too :aigo:.

[retro-spec]

I just registered with you guys. Got the rear visor in just fiberglass? What would be nice is brake cooling ducts too :aigo:.

i can make the visor in fg but you would have to paint or colormatch.
lmk, Paulo.

[Letsride]

Hows the cooling panel held on? PM sent BTW......

[7M-KDL]

Hows the cooling panel held on? PM sent BTW......

by faith lol

[retro-spec]

Hows the cooling panel held on? PM sent BTW......

the front of it goes uder a lip in the body on our we make a hole on the back to put a self taping screw right next to the hole for the latch, it wont move ounce you're done.
Thanks, Paulo.

[Hmong_1G]

i can make the visor in fg but you would have to paint or colormatch.
lmk, Paulo.

That is not a problem. Whats the SM cost?

[retro-spec]

That is not a problem. Whats the SM cost?

149.99+ shipping black in color, Thanks.

[the t3d]

does the carbon fiber fuse box just fit over the stock one, or does it replace it all together?

-t3d

[retro-spec]

does the carbon fiber fuse box just fit over the stock one, or does it replace it all together?

-t3d

it goes over the OEM one, Thanks.
Paulo.

[NewWestSupras]

Hi Paulo, were you able to get the spark plug valley cover fabbed? You guys are doing good work. Thanks from another 7M'er.

[retro-spec]

Hi Paulo, were you able to get the spark plug valley cover fabbed? You guys are doing good work. Thanks from another 7M'er.

sort of, we screwed up 2 cf blanks, im making more so we can fab a few.
then when it fits right we will make a mold, Thanks.
Paulo.

[supra300]

RazoE, how the gas door fastens to a body, there is no photo? How many weighs in gathering with the mechanism?

[RazoE]

Its just a brand new gas door wrapped in CF, I just tranferred basic hardware from my old (and broken/dented/rusty) gas door...

[supra300]

Clearly. Thanks for a prompt reply. Simply did to itself and has faced that the mechanics to make more difficult, and to find as someone does could not. The mechanics on my gas door is almost ready, it was necessary to lower weight to do from termo plasticity PBT GF30, otherwise manufacturing of such detail in general loses meaning)

http://pics.livejournal.com/supra300/pic/001bhhzw/
Excuse I do not know as to insert a photo into the text

[jugodegolf]

::w00t:: For cool parts!!!

[TheNewRed]

Seeing as it's an big item to design and create, maybe you should setup a group buy. That way you can actually have people put in some or all of the money to make sure that there actually are 'buyers' for the hood. Personally I have no interest in the a raised cowl hood. If you decide to make a Stout style hood however, I'd definitely be in.

Paulo im down for putting money on a fiberglass raised cowl hood only if my money can go towards a Carbon fiber one, and id like to purpose another idea, carbon fiber whale tail spoilers if thats at all possible id buy one of those too.

Also, i recieved my parts, they a perfect. Ill post pics asap!

As soon as the sparkplug cover is done, ill purchase one.

[RazoE]

I personally would have preferred the center console had the ash tray been removed, and the cig lighter cut out for a gauge, and the other gauges inline with it, but it honestly does look good, I might consider a FG version, and plastidip it...

http://farm3.static.flickr.com/2112/2348707795_d47c163a1b.jpg


it's a rubber-textured spray that works great!

[MA71_Static]

How about a carbon fiber glove box delete with spots for gauges and other piggy backs, or a carbon gauge holder for that plastic passengerside vent deal

[atlpd3147]

I second glove box delete. I have a standalone that I could put behind and not worry about stuffing in a small space if u made a glove box cover.

[retro-spec]

I second glove box delete. I have a standalone that I could put behind and not worry about stuffing in a small space if u made a glove box cover.



note taken will start asap, Thanks guys.
Paulo.