Whats wrong with this pic?

[gdc5ind]

http://i533.photobucket.com/albums/ee337/gdc5ind/Picture033.jpg

[FullNelson]

Youve wired your pulley in backwards

[customs]

...nothing?

[gdc5ind]

Look at the crank and the cam gears....

[kotu100]

no crank pulley?

[tissimo]

Look at the crank and the cam gears....

you know it takes 2 crank revs for 1 cam rev right? turn the crank another 360, and they should be straight up.

[cruzinbill]

Tissimo with the shot and.... score!!!!
But on a serious note I agree just give her another whirl she will come around how you like her.

[ahmed]

bingo.

[kwnate]

I thought the car sounded weird, and i noticed the timing was of so I did a compression test and leakage test. It passed the compression test 152 all the way down, the leakdown test was a different story. It failed on two cylinders, the exhaust valves were leaking.

How is the timing off?

[gdc5ind]

Its off by one tooth on each cam gear. In this position the cam gear should be straight down and its not. The car sounded like shit, and that what mad me check the timing. Do you think ths valves DONE?

[tissimo]

Its off by one tooth on each cam gear. In this position the cam gear should be straight down and its not. The car sounded like shit, and that what mad me check the timing. Do you think ths valves DONE?

With stock cams the engine is non-interference. Just fix the timing and itll be fine.

[gdc5ind]

Just ordered new timing belt and tensioner from Driftmotion.

Thanks Tissimo