For those of you wondering about Piratetips rebuilds. They are amazing. I finally got mine in my car and have driven it around some. I haven't raced it or even been over a hundred yet, but so far it's a great improvement over my stock one. Mine was a whiny little bitch though. So far I haven't heard any noises from the rear of my car...….just the twin disc clutch. Thanks for a great product!!!!!
1...86.5 White NA HT W58-$old
2...89 White Turbo Targa Auto-1jz stock twins-DAILY!
3...87 Burgandy NA HT W58-$old
4...89 White Turbo Targa Auto-$old
5...87 Black NA HT-$old
6...87 Black 1JZ Targa-$old
7...87 2-Tone Brown Targa Turbo R154-$old
8...87 Black NA Targa Auto-stripped/scrapped
9...89 Pearl White Turbo/Targa/R154-$old
10...88 Rattle Black Turbo/Targa/R154-$old
11...89 White Turbo/Targa/5-Spd-stripped/scrapped
12...87 Light Blue Turbo/R154-$old
13...88 Silver NA-$old
14...89 Cressida W58 Swap-$old
15...93 Lexus SC300-W58-$old
16...88 Pearl White/Targa/R154-$old
17...87 Blue on Blue Turbo/Targa/R154-$old
19...87 Pearl White/Turbo/Targa/R154-$old
20...89 Silver/Turbo/Targa/Auto/R154 swap-$old
hi, tubbie, I have bought parts from you many times before and have been satisfied your parts/service. Now, I am looking for electric door lock switch drivers side for my 1988 supra. Got one for sale? How much? If don't have one , know where I can find one. Thanks. Jace
New to this forum. Searching for the following part for a 1989 Toyota Supra Turbo V6 Automatic - Part Number 7810014081 (Link Assembly Accelerator ). Any advice / direction would be greatly appreciated.
That's good. I wouldn't want my good looks to come between our friendship. The five or six states between us do a good enough job of that. You should move down south. You'd get a lot more yards to cut and a longer season to do it.
Hey, long time lurker and finally getting crap done on my boss. I went through Stevens entire build thread and I really like the coil mount you made for him with the 1zz could. I s wondering if you could send me a file related to that. I'm solid works savvy and would like to get that made at my shops machine shop. Any info would be much appreciated. Maybe even a donation for incentive? Tmark91@gmail.com
Hey man, really love the rims you have on your 88 two tone. I have the exact same color combo and am finally getting her back on the road after getting hit by someone 4 years ago and am in the market for rims and yours look beautiful with that color combo, would you mind telling me what kind they are and what size?
Hey Albert I was hoping that i could get any CNC machine files and tooling required. I would love to help you get this going and any r&d i would report back to you. Honestly any help into getting this swapped over would be appreciated. I'm a big 7m guy and love the idea of keeping it around, I just need a transmission to put behind it now.
Hello from Arizona, just curious if I could get a little help from you with wiring all I need to know is which wires does what on the body side of the engine to body connector for an 87 naturally aspirated supra I'm doing a 1jzgte swap and the wiring has me stumped. I've looked at all the wiring posts on sm and tsrm doesn't show it please if you have this info email me at firstname.lastname@example.org
I have been folowing Your Disassembly/Analysis thread for a long time. I dont own a supra, but i own RX7 (fd3s). It has denso ecu, and inside there is a D151803 controller. I have bought chiped ecu. It has external eprom added, but data is scrambled. It looks like this: http://page.freett.com/na6/FD_ECU02_480x360.jpg
I saw that you wrote, that you had made simple board to run external eprom? Maybe you could share it? My car runs rich on idle/low load. I would like to adjust VE table.
Thanks Ken. It's been about that long since I've posted on Supramania.........at least it seems that way. I've been so busy with work, I haven't done anything to my car except pull the engine and take everything off of it. Maybe one day soon, I'll get it to the machine shop. Not sure yet, what I'm going to put it in though...lol