What did you do to your supra today? Pics
- Thread starter boostinsupra
- Start date
inventory at our warehouse this weekend, no pictures but the supra will be paked out front....... i can get a picture of that if you like......lol
lets see where do you want me to start lol.... tomorow pwr steering pump is coming out so i can trade it for another remained one.... then saturday im puting some kickass underlights on that are gonna be wired to my keyless entry so when i hit unlock the underlights flash when i open the door they comeon lol just to be cool lol not gonna be rice and drive around with them on.... sunday replacing all the low preasure lines on the steering system as well as high preasure line with new rack.... long weekend
Devin LeBlanc
Banned
I hope your going 550's with that! 
Well since its 12:07 am yet I have not gone to sleep.. But in the morning I am going to replace the valve cover gaskets that are leaking that I just replaced 700 miles ago.. wtf lol Then Going to the track at night to hopfully get a 13.6-7
Well since its 12:07 am yet I have not gone to sleep.. But in the morning I am going to replace the valve cover gaskets that are leaking that I just replaced 700 miles ago.. wtf lol Then Going to the track at night to hopfully get a 13.6-7
Bringing this thread over from SF?
Today: drove it to work
Tomorrow: driving the nephew over to the Simply Clean 2 show (gotta support local shows even if they are stance/flush shows)
Today: drove it to work
Tomorrow: driving the nephew over to the Simply Clean 2 show (gotta support local shows even if they are stance/flush shows)
absolutely nothing... its put away for the winter. i will see it tomorrow and probably check the coolants freeze rating though.
just started taking the head of, busted my knuckels in the process.i guess the monsters is thursty for some blood. lol.
Finally get to replace the turbo in my wifes 88 tonight. After that I am going to spend the rest of the night putting up shelves in my shop to get all the excessive supra parts I have off the floor so I can walk and possibly park a car in there once again. Tomorrow more adding shelves then body work on mine. O and sometime tomorrow go test out the turbo in my wifes car.
^^^ Sounds like a couple of guys need to learn their way around a 7M better...lol
Drove mine to work, took it to lunch and sat in drive thru for 15 minutes with no problems then drove back to the office where she is waiting to go home tonight.
Drove mine to work, took it to lunch and sat in drive thru for 15 minutes with no problems then drove back to the office where she is waiting to go home tonight.
Finishing some body work on mine this weekend. Pulled it out of the garage last week and went on a short drive to blow the dust off, lol.
Devin LeBlanc
Banned
Drove mine to work as well. Figured out it's real easy to light up the inside rear tire in 2nd if I turn at ~35mph.
As for plans for it for tomorrow? I'm going to be saving up as much as possible until the end of May for some go-fast/stop-fast/handle-better goodies.
As for plans for it for tomorrow? I'm going to be saving up as much as possible until the end of May for some go-fast/stop-fast/handle-better goodies.
Today? Cleaned up the bay a bit, put the coil packs and wires back on. Just waiting on some gas tank straps and I'm zoom zoomin!
Blur FTW!
Blur FTW!
Mike, you need a bigger turbo man, that is way too small!!
Going back to inventory today , so have a little road trip this morning work is 12 miles from home. no pics either not as eciting as what some of you posted. hopefully we get done early today and have some time left to the day when we get out of there.
Going back to inventory today , so have a little road trip this morning work is 12 miles from home. no pics either not as eciting as what some of you posted. hopefully we get done early today and have some time left to the day when we get out of there.
Replacing a few hoses, then putting snow tires on. Don't want to go through another experience like last year :X.
My nickname when I was a kid was 'boo boo' and not as in Yogi's buddy. If it's possible for me to cut/scrape myself I likely will.
Chipped my glasses when an exhaust bolt broke free and the wrench smacked me. Bruised a cheek when a valve spring let loose while putting in my Comp Cams springs. Ripped the fleshy part of my thumb open on the factory clamp that holds the head oil drain hose while trying to unstick the 20 yo hose from the valve cover...
It happens so often I don't even stop (half the time I don't even notice) when I get cut unless it's deep enough to require immediate attention. If it's just bleeding a little I'll stop and have a smoke to give it time to stop dripping.
Same crap when I work on computers too. Swap a HDD and end up with cut marks all over my hands.
drove an hour and a half to the farm, and realized i forgot my coolant tester. the one at the farm was fubar... so.... i emptied a little bit into a 16oz bottle and tested it here in town... +5*f....thats not good now i have to drive another 3 hours round trip to drop the coolant for the winter.
that make a total of 6 hours driving to discover that the coolant wont be good for the winter and remedy that. sometimes i hate myself!
on a side note i did have other stuff to do up there... so all wasnt a loss today.
that make a total of 6 hours driving to discover that the coolant wont be good for the winter and remedy that. sometimes i hate myself!
on a side note i did have other stuff to do up there... so all wasnt a loss today.
Looked at it and felt my pocket get lighter. My money magically disappeared. HAHAHAHA. No but really... it's about to happen...
Drove it to Cars and Coffee, Irvine, joined by some friends. Pics!:
http://www.cncpics.com/album/201011/101113/CnC+11-13-2010+015.JPG.html?g2_imageViewsIndex=1
http://www.cncpics.com/album/201011/101113/CnC+11-13-2010+028.JPG.html?g2_imageViewsIndex=1
http://www.cncpics.com/album/201011/101113/CnC+11-13-2010+029.JPG.html?g2_imageViewsIndex=1
http://www.cncpics.com/album/201011/101113/CnC+11-13-2010+015.JPG.html?g2_imageViewsIndex=1
http://www.cncpics.com/album/201011/101113/CnC+11-13-2010+028.JPG.html?g2_imageViewsIndex=1
http://www.cncpics.com/album/201011/101113/CnC+11-13-2010+029.JPG.html?g2_imageViewsIndex=1
ahah x2
---------- Post added at 10:53 AM ---------- Previous post was at 10:49 AM ----------
that black supra is my inspiration for my MKIII no homo dude has style.
Looks like mine just 1000x less messy (wire wise)Washed and ready for the drags! Also cleaned the interior! Looking good
