Upgrading wire for fuel pump

Clip

The Magnificent Seven
Authorized Seller
Joined
Oct 16, 2005
Messages
2,977
Location
North Carolina
So I was sitting here thinking about running 10ga back to the hatch for the fuel pump when it dawned on me that I've still got "remove 1/0 that used to power an amplifier" on my to-do list. That's already been run to the hatch and I just pulled it from the engine bay during the swap, sitting under the glovebox now. Would installing a decent Bussman or Littelfuse 50A fuse next to the battery and running to a distribution block in the back be a bad idea? I'd also install an ATC blade fuse and 10ga off of the distribution block to the pump for the last foot or two.