***SM Member Horsepower List***

din904

New Member
Authorized Seller
Joined
Oct 25, 2010
Messages
76
Likes
0
Location
Jacksonvile,FL.
View attachment 78980

1990 supra....
ge block, .20 over wisecos, eagles, shimmed pump, arz feed tube,
fully ported and built head. 272's, bigger valves, ti retainers, ffim, 90mm RMR throttle body
hks 2.0 stopper, arp L19 studs, o-ringed block
cast manifold, sp qsv, bw s369sxe, complete 3.5" stainless exh with vibrant race "muffler"
tial, wastegate and bov, 3" intercooler piping, huge treadstone intercooler
mishimoto race rad, dual fan kit
built r154, mc and dm parts
act extreme clutch with ceramic 6 puck. princess motorsports driveshaft, 373 rear end with weir stage 2 kit
walbro 450, bosch 1700's, jms dual pump controller, -6 to dual -6 lines, fuel lab filter
megasquirt ms3pro, Subaru sti coils
I think that's everything. lol

How much boost and what fuel you running?
 

sheedy126

Boost Addict
Authorized Seller
Joined
Apr 30, 2012
Messages
717
Likes
2
Location
kennewick
7mgte stock bottom end (balanced)
Schneider racing 272deg .315lift cams
Super tech dual springs ti retainers
Mhg/Arp bolts
China exhaust manifold, ptr ffim
Ecumaster emu (self tuned)
Borg warner s362sxe 1.00 t4 divided 21psi boost (100 octane)
housing
ID 1000cc
Walbro 400lph
Fidanza flywheel


Sent from my SM-J320V using Tapatalk
 

MarkIII4Me

Project OVERKILL!!!
Authorized Seller
Joined
Apr 10, 2005
Messages
1,264
Likes
5
Location
Charleston, SC
My 7M just put down 516whp. This should bring me from #21 to #15. :icon_bigg

Can I be updated on the list?

55ADFD42-0737-4405-911B-7A19FA4E7DDC.jpeg

-100hp dip at 6200rpm was due to spark blowout and has since been resolved by tightening plug gap to 24.


[video=youtube;ZmsoiVwJuBI]https://www.youtube.com/watch?v=ZmsoiVwJuBI[/video]
 
Last edited:

1jzpwrlives

Member
Authorized Seller
Joined
Dec 5, 2017
Messages
39
Likes
2
Location
Texas

630hp, 522tq
1jzgte non vvti
port polished head, 1mm oversized intake valves, bc 264 cams arp studs.
stock block
e85
ID1050 injectors
450pump with upgraded hp spring
radium rail
custom exhaust manifold
greedy t88 34d 18cm
4" intercooler
2.5 ic piping
aim infinity
boost 26.5psi
 
Likes: gsxr141

gsxr141

Active Member
Authorized Seller
Joined
Oct 24, 2010
Messages
1,162
Likes
2
Location
rochester
Built ge block. Wisecos, eagles, upgraded pump and line. Fully ported head, 272s. 1mm over valves, ti retainers. Arp l19s, his stopper, o-ringed block.
Bws369, sp qsv, 1700s, twin pumps, jme boost a pump. Ffim, Ross machine 90mm Tb. Titan cam gears. Remote filter and cooler. Ms3pro. Crank trigger setup. Probably forgetting alot.
 

Attachments

Likes: ricoboost

Dylan JZ

一番 King
Authorized Seller
Contributor
Joined
Oct 18, 2007
Messages
2,222
Likes
2
Location
湾岸せん
Screenshot_20181119-144734_Gallery_resized.jpg

1jzgte / R154 ('87 Supra Turbo 5spd)
520whp /429wtq @17psi on 93 octane
Stock bottom end
ARP head studs
BC - 272s/ springs / retainers
Zoonwen turbo manifold / Borg Warner S360 .88 T4 (83-75) / Tial V44
BPMC 24x13x3 / 3" piping / Tial 50mm BOV
Custom 3" DP / Blitz Nurspec R
Walbro 400lph / -6 AN fuel lines / ID1000s in HKS fuel rail / Radium Engineering fuel damper
Mishimoto 3" radiator w/ modded 2JZ clutch fan
Aeromotive AFPR
DM 1JZ AEM V2


After making the move from FL to here in OR, the engine hit around 20psi (92oct) on a specific run because of the colder weather and not getting it retuned. As a result, it toasted the rings on cylinder 5.

It's currently being rebuilt to similar specs but with fully built bottom end (still 1J because I like em).
 
Last edited:
Likes: gsxr141