Not sure what this is...

supraman74

I bought it SUPPED up
Authorized Seller
Joined
Apr 26, 2007
Messages
89
Likes
0
Location
Iowa
#1
I searched, so please dont scold me :aigo: I also checked the tsrm but I couldnt find any good pics of what I was looking at.
I think it has something to do with the egr but I'm not positive.
Just below and to the right of the fuel rail back by the firewall...
There is just a hole there, shouldnt that have a block off plate there?



 

Quin

Trans killer
Authorized Seller
Contributor
Joined
Dec 5, 2006
Messages
1,989
Likes
0
Location
Columbus, IN
#2
I don't see what you're talking about, could you circle it in paint or something?
 

JesseH

Active Member
Authorized Seller
Joined
Nov 12, 2005
Messages
1,154
Likes
0
Location
Englewood, Ohio, United States
#3
thats a port for the EGR valve. It depends, is that a JDM motor? If its a JDM motor it prob. wont matter because most the JDM motors have a block off on the EGR cooler thats on the back of the head. If you've gone that long without seeing any problems then you prob. already have it blocked further up the line

-Jesse



EDIT: this is the best pic i have to show you but look on the back of the head where the 90 degree hose is right next to the bend, thats a block off that im talking about
 

lintlars

ROOTS RADICALS
Authorized Seller
Joined
Apr 1, 2005
Messages
631
Likes
0
Location
Ft.St.John BC
#4
From the pic it looks like you have a factory EGR block off plate (JDM) but thats were the EGR is supposed to go
 

NashMan

WTF did he just wright ?
Authorized Seller
Joined
Aug 5, 2005
Messages
4,970
Likes
1
Location
Victoria BC
#5
well it is not an issue in less exhast ant coming out of it so eather jdm head or

you have threaded bung put in your head like mine