Can’t get my car to start got spark and fuel when cranking it’s like the whole engine is jump/ shaking got a start up map from Driftmotion guy I’m thinking my cps setup is wrong also this cps there’s not much adjustment to turn it to the right. I’m at TDC 0*
When I installed mine (AEM v2), I had someone turn the car over, without starting it, while I observed with a timing light and made adjustments to get the timing set. At that point I started it and made my final adjustments.
Also, in your standalone console, check to make sure that the cam and crank counts are incriminating when you turn over the engine.
I eventually went back to a rebuild OEM CPS as the sensors on the digital CPS would fail from engine heat; but that is just my experience.