boost gauge question

Untouchable7mgte

back in the game!
Authorized Seller
Joined
Apr 1, 2005
Messages
298
Likes
0
Location
Wilkes-Barre,PA
#1
hey guys i know this sounds liek a noob question but i finally got a boost gauge and im not to sure on where i run the new vacuum line to inside the car. thanks guys.

tom
 

supraman7mgte

Shut up,bitch!!
Authorized Seller
Contributor
Joined
Apr 1, 2005
Messages
1,753
Likes
0
Location
Sunny California
#2
I used the vacume tube at the sender unit for the stock gauge. It is on the drivers side near the speed control device.Just disconnect the old one and take it out and insert the plastic tube to the new gauge in there.Some people will actually install it into the intake chamber for a better reading,but to each his own.
 

shaeff

Kurt is FTMFW x2!!!!
Staff member
Super Moderator
Authorized Seller
Joined
Mar 30, 2005
Messages
10,581
Likes
0
Location
Around
#6
i didnt have anything coming off the back of the intake manifold on my JDM motor, so i just used that spot. :) so add me to the list, i suppose.

-shaeff