2jz/1jz bellhousing bolts size and length?

Fletch124

2jz swapped!
Authorized Seller
Joined
Jul 17, 2005
Messages
1,282
Likes
0
Location
Reno, Nevada
#1
What size and length of bolts are needed for a 2jz block/1jz bellhousing? The size is 12x1.25 correct? Just need to know how long and how many. I bought a set of the DM bolts a few months ago but they were 2mm too small... They were cheap so I said whatever, but now I cant find them to bring them to the hardware store.

Thanks,
Reid
 

tlo86

Ninja Editor 'Since 05'
Authorized Seller
Contributor
Joined
Jul 24, 2005
Messages
3,914
Likes
1
Location
Colorado
#2
What size and length of bolts are needed for a 2jz block/1jz bellhousing? The size is 12x1.25 correct? Just need to know how long and how many. I bought a set of the DM bolts a few months ago but they were 2mm too small... They were cheap so I said whatever, but now I cant find them to bring them to the hardware store.

Thanks,
Reid
try a toyota dealer?
 

bigaaron

Supramania Contributor
Authorized Seller
Contributor
Joined
Apr 12, 2005
Messages
4,692
Likes
0
Location
Pomona, CA
#5
What size and length of bolts are needed for a 2jz block/1jz bellhousing? The size is 12x1.25 correct? Just need to know how long and how many. I bought a set of the DM bolts a few months ago but they were 2mm too small... They were cheap so I said whatever, but now I cant find them to bring them to the hardware store.

Thanks,
Reid
What was too small? The diameter or the length? There are four 10mm x 1.25 x40mm, five 12mm x 1.25 x 50mm, and two 10mm x 1.25 x 70mm (starter). We have sold about 50 of the kits and I have not heard anyone say anything was not the correct length or diameter. I know it fits because I have personally installed at least 3 or 4 1jz's at our shop using the bolt kit since we started selling it. And if there was an issue with it, why not ask me about it?
 

Fletch124

2jz swapped!
Authorized Seller
Joined
Jul 17, 2005
Messages
1,282
Likes
0
Location
Reno, Nevada
#6
What was too small? The diameter or the length? There are four 10mm x 1.25 x40mm, five 12mm x 1.25 x 50mm, and two 10mm x 1.25 x 70mm (starter). We have sold about 50 of the kits and I have not heard anyone say anything was not the correct length or diameter. I know it fits because I have personally installed at least 3 or 4 1jz's at our shop using the bolt kit since we started selling it. And if there was an issue with it, why not ask me about it?
You know what I just realized, I only tried the starter bolts in the kit. No wonder why they were too small. Reason I didnt make a deal out of it was because it was only $20 and I bought them probably 4 months ago. No big deal. Now that I know this, I will find them for sure.

Thanks Aaron,
DM FTW!